Home » The PARIS Forums » PARIS: Main » OK guys.....just in case you were curious-here's what's on the horizon.
OK guys.....just in case you were curious-here's what's on the horizon. [message #74649] |
Sun, 22 October 2006 14:51 |
animix
Messages: 356 Registered: September 2006
|
Senior Member |
|
|
I have ordered 2 x Scope II Project cards and a Sync plate so I can clock
these. One of them will have the ADAT interface board (there were only two
of these available in North America and since these are rare and apparently
abnormal, I like that;o) for 24 ADAT I/O, a spdif I/O and a Midi I/O, the
other will have what is called a ZLink interface. This ZLink thingie allows
the addition of a couple of analog I/O boxes later on and includes an
unbalanced analog I/O, another ADAT I/O and a Midi I/O. Each card has 7 x
SHARC DSP's and it's got a lot plugins bundled and there is a lot of third
party support. It's sorta what I hoped Paris would evolve into, I
think.......sooo......if things o as planned I'll be patching the 32 I/O of
the Scope cards to the ADAT inputs and outputs of 4 Paris ADAT modules
across 4 x MECs and thereby have 8 x *realtime (as in no latency)* DSP based
processors available per submix. This, along with native plugs and hardware
DSP should get me down the road. I'm going to have to get some analog
interfaces for this though if I want to be able to chain analog FX along
with digital FX to the Paris inserts. I'm going to wait and see if
everything else is going to be satisfactory before I jump this far into it.
I'll be using this a standalone DSP processor only which is all I've ever
wanted all along when trying to integrate Cubase SX and Paris. I never use
midi here and if I need it', the Creamware will work with Cubase SX. I just
hope the FX are of the same general quality as the UAD-1. I don't expect
them to be exactly the same, but I am hoping for the same kind of vibe.
Now the other part of the equation will be using an RME ADI4 DD (an AES to
ADAT format converter) to strap my 4 x hardware reverbs across the 4 x Paris
submixes by sending the outputs of each of the modules into the RME box,
chaining the signal through the second ADAT module of each MEC and returning
the signal to the RME box and the AES inputs of the hardware reverbs to
complete the loop.
If this works, I'll be moving a bunch of RME audio hardware and UAD-1 cards
outta' here PDQ. I'll post them up here to give ya'll first dibs.
Deej
|
|
|
|
|
OK guys.....just in case you were curious-here's what's on the horizon.
By: animix on Sun, 22 October 2006 14:51
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: rick on Mon, 23 October 2006 01:45
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: animix on Mon, 23 October 2006 07:16
|
|
|
Re: OK guys.....just in case you were curious-here's what's on thehorizon.
By: John [1] on Mon, 23 October 2006 07:35
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: Don Nafe on Mon, 23 October 2006 11:07
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: animix on Mon, 23 October 2006 11:17
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: animix on Mon, 23 October 2006 11:21
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: Don Nafe on Mon, 23 October 2006 14:26
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: rick on Tue, 24 October 2006 01:35
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: TCB on Mon, 23 October 2006 06:16
|
|
|
Re: OK guys.....just in case you were curious-here's what's on the horizon.
By: animix on Mon, 23 October 2006 07:15
|
Goto Forum:
Current Time: Wed Dec 25 04:16:04 PST 2024
Total time taken to generate the page: 0.00823 seconds
|