Home » The PARIS Forums » PARIS: Main » HEEEELP!
| HEEEELP! [message #88766] |
Mon, 06 August 2007 09:10  |
|
|
I hate it when this happens! I have two violins, viola, 'cello, bass, clarinet,
piano and two singers wating to record. Everything was fine when I turned
the system on this morning. I walk into the control room to find the computer
locked up. reboot and start Paris and I get - "error in initialization;
Paris Engine. Error code -43/ffffffd5". Does anyone know what that means?
I shut everything down and rebooted - same result. I switch boot volumes
- different OS, different paris installation - same result. I switched my
MEC to the EDS card that lives in my old computer and Paris booted fine so
it must be a hardware problem.
I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS cards in
a Magma 13 slot expansion chassis. I guess the first step is to strip it
down to one EDS card in the Magma to see if I can isolate a bad card.
Thank God I have multiply redundant redundancy systems running running here
here. Else I'd have some PISSED off people in my studio right now!
Moral of the story - Don't throw your old computer away! Keep one EDS card
in it and have it for a spare...
So - any thoughts about what "error in initialization; Paris Engine. Error
code -43/ffffffd5" means?
Gantt
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: HEEEELP! [message #88767 is a reply to message #88766] |
Mon, 06 August 2007 09:48  |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_001F_01C7D828.22265F20
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hey Gantt,
I'm guessing but check all connections to hardware,
ribbon cables etc. You had to change them to get the
old computer running so maybe . . .
Maybe reseat the EDS cards. Don't go too crazy yet.
Tom
"Gantt Kushner" <ganttmann@comcast.net> wrote in message =
news:46b747e6$1@linux...
I hate it when this happens! I have two violins, viola, 'cello, bass, =
clarinet,
piano and two singers wating to record. Everything was fine when I =
turned
the system on this morning. I walk into the control room to find the =
computer
locked up. reboot and start Paris and I get - "error in =
initialization;
Paris Engine. Error code -43/ffffffd5". Does anyone know what that =
means?
I shut everything down and rebooted - same result. I switch boot =
volumes
- different OS, different paris installation - same result. I =
switched my
MEC to the EDS card that lives in my old computer and Paris booted =
fine so
it must be a hardware problem.
I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS cards =
in
a Magma 13 slot expansion chassis. I guess the first step is to strip =
it
down to one EDS card in the Magma to see if I can isolate a bad card. =
Thank God I have multiply redundant redundancy systems running running =
here
here. Else I'd have some PISSED off people in my studio right now!
Moral of the story - Don't throw your old computer away! Keep one EDS =
card
in it and have it for a spare...
So - any thoughts about what "error in initialization; Paris Engine. =
Error
code -43/ffffffd5" means?
Gantt
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_001F_01C7D828.22265F20
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hey Gantt,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I'm guessing but check all connections =
to=20
hardware,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ribbon cables etc. You had to =
change them to=20
get the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>old computer running so maybe . . =
..</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Maybe reseat the EDS cards. Don't =
go too=20
crazy yet.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Gantt Kushner" <<A=20
href=3D"mailto:ganttmann@comcast.net">ganttmann@comcast.net</A>> =
wrote in=20
message <A=20
href=3D"news:46b747e6$1@linux">news:46b747e6$1@linux</A>...</DIV><BR>I =
hate it=20
when this happens! I have two violins, viola, 'cello, bass,=20
clarinet,<BR>piano and two singers wating to record. Everything =
was fine=20
when I turned<BR>the system on this morning. I walk into the =
control=20
room to find the computer<BR>locked up. reboot and start Paris =
and I get=20
- "error in initialization;<BR>Paris Engine. Error code =
-43/ffffffd5". =20
Does anyone know what that means?<BR> I shut everything down and =
rebooted=20
- same result. I switch boot volumes<BR>- different OS, =
different paris=20
installation - same result. I switched my<BR>MEC to the EDS card =
that=20
lives in my old computer and Paris booted fine so<BR>it must be a =
hardware=20
problem.<BR><BR>I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) =
with 3=20
EDS cards in<BR>a Magma 13 slot expansion chassis. I guess the =
first=20
step is to strip it<BR>down to one EDS card in the Magma to see if I =
can=20
isolate a bad card. <BR><BR>Thank God I have multiply redundant=20
redundancy systems running running here<BR>here. Else I'd have =
some=20
PISSED off people in my studio right now!<BR><BR>Moral of the story - =
Don't=20
throw your old computer away! Keep one EDS card<BR>in it and =
have it for=20
a spare...<BR><BR>So - any thoughts about what "error in =
initialization;=20
Paris Engine. Error<BR>code -43/ffffffd5" =
means?<BR><BR>Gantt</BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BODY ></HTML>
------=_NextPart_000_001F_01C7D828.22265F20--
|
|
|
|
| Re: HEEEELP! [message #88768 is a reply to message #88767] |
Mon, 06 August 2007 10:00 |
|
|
Actually, to switch computers I didn't have to change anything but the MEC
and C16 connections from the Magma expander to the EDS card in the old computer.
I'll do some wiggling and re-seating before I start the really invasive
surgery...
Thanks!
gantt
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Hey Gantt,
>I'm guessing but check all connections to hardware,
>ribbon cables etc. You had to change them to get the
>old computer running so maybe . . .
>
>Maybe reseat the EDS cards. Don't go too crazy yet.
>Tom
>
> "Gantt Kushner" <ganttmann@comcast.net> wrote in message =
>news:46b747e6$1@linux...
>
> I hate it when this happens! I have two violins, viola, 'cello, bass,
=
>clarinet,
> piano and two singers wating to record. Everything was fine when I =
>turned
> the system on this morning. I walk into the control room to find the
=
>computer
> locked up. reboot and start Paris and I get - "error in =
>initialization;
> Paris Engine. Error code -43/ffffffd5". Does anyone know what that =
>means?
> I shut everything down and rebooted - same result. I switch boot =
>volumes
> - different OS, different paris installation - same result. I =
>switched my
> MEC to the EDS card that lives in my old computer and Paris booted =
>fine so
> it must be a hardware problem.
>
> I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS cards
=
>in
> a Magma 13 slot expansion chassis. I guess the first step is to strip
=
>it
> down to one EDS card in the Magma to see if I can isolate a bad card.
=
>
>
> Thank God I have multiply redundant redundancy systems running running
=
>here
> here. Else I'd have some PISSED off people in my studio right now!
>
> Moral of the story - Don't throw your old computer away! Keep one EDS
=
>card
> in it and have it for a spare...
>
> So - any thoughts about what "error in initialization; Paris Engine.
=
>Error
> code -43/ffffffd5" means?
>
> Gantt
>
>
>I choose Polesoft Lockspam to fight spam, and you?
>http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Hey Gantt,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>I'm guessing but check all connections
=
>to=20
>hardware,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ribbon cables etc. You had to =
>change them to=20
>get the</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>old computer running so maybe . . =
>.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Maybe reseat the EDS cards. Don't =
>go too=20
>crazy yet.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Gantt Kushner" <<A=20
> href=3D"mailto:ganttmann@comcast.net">ganttmann@comcast.net</A>> =
>wrote in=20
> message <A=20
> href=3D"news:46b747e6$1@linux">news:46b747e6$1@linux</A>...</DIV><BR>I
=
>hate it=20
> when this happens! I have two violins, viola, 'cello, bass,=20
> clarinet,<BR>piano and two singers wating to record. Everything =
>was fine=20
> when I turned<BR>the system on this morning. I walk into the =
>control=20
> room to find the computer<BR>locked up. reboot and start Paris =
>and I get=20
> - "error in initialization;<BR>Paris Engine. Error code =
>-43/ffffffd5". =20
> Does anyone know what that means?<BR> I shut everything down and =
>rebooted=20
> - same result. I switch boot volumes<BR>- different OS, =
>different paris=20
> installation - same result. I switched my<BR>MEC to the EDS card =
>that=20
> lives in my old computer and Paris booted fine so<BR>it must be a =
>hardware=20
> problem.<BR><BR>I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) =
>with 3=20
> EDS cards in<BR>a Magma 13 slot expansion chassis. I guess the =
>first=20
> step is to strip it<BR>down to one EDS card in the Magma to see if I =
>can=20
> isolate a bad card. <BR><BR>Thank God I have multiply redundant=20
> redundancy systems running running here<BR>here. Else I'd have =
>some=20
> PISSED off people in my studio right now!<BR><BR>Moral of the story -
=
>Don't=20
> throw your old computer away! Keep one EDS card<BR>in it and =
>have it for=20
> a spare...<BR><BR>So - any thoughts about what "error in =
>initialization;=20
> Paris Engine. Error<BR>code -43/ffffffd5" =
>means?<BR><BR>Gantt</BLOCKQUOTE>
><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
>and=20
>you?<BR><A=20
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A> </FONT></DIV></BODY></HTML>
>
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: HEEEELP! [message #88770 is a reply to message #88767] |
Mon, 06 August 2007 10:07 |
Rich[3]
Messages: 132
Registered: January 2006
|
Senior Member |
|
|
I do the same thing - I have two dual card systems as things seem to creep
in at the worst time.
Ditto on the conections - with me the MEC cables seem to lose connection
over time. Once I even lost all sound on the left side - reseated the cable
and boom came back...
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Hey Gantt,
>I'm guessing but check all connections to hardware,
>ribbon cables etc. You had to change them to get the
>old computer running so maybe . . .
>
>Maybe reseat the EDS cards. Don't go too crazy yet.
>Tom
>
> "Gantt Kushner" <ganttmann@comcast.net> wrote in message =
>news:46b747e6$1@linux...
>
> I hate it when this happens! I have two violins, viola, 'cello, bass,
=
>clarinet,
> piano and two singers wating to record. Everything was fine when I =
>turned
> the system on this morning. I walk into the control room to find the
=
>computer
> locked up. reboot and start Paris and I get - "error in =
>initialization;
> Paris Engine. Error code -43/ffffffd5". Does anyone know what that =
>means?
> I shut everything down and rebooted - same result. I switch boot =
>volumes
> - different OS, different paris installation - same result. I =
>switched my
> MEC to the EDS card that lives in my old computer and Paris booted =
>fine so
> it must be a hardware problem.
>
> I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS cards
=
>in
> a Magma 13 slot expansion chassis. I guess the first step is to strip
=
>it
> down to one EDS card in the Magma to see if I can isolate a bad card.
=
>
>
> Thank God I have multiply redundant redundancy systems running running
=
>here
> here. Else I'd have some PISSED off people in my studio right now!
>
> Moral of the story - Don't throw your old computer away! Keep one EDS
=
>card
> in it and have it for a spare...
>
> So - any thoughts about what "error in initialization; Paris Engine.
=
>Error
> code -43/ffffffd5" means?
>
> Gantt
>
>
>I choose Polesoft Lockspam to fight spam, and you?
>http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Hey Gantt,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>I'm guessing but check all connections
=
>to=20
>hardware,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ribbon cables etc. You had to =
>change them to=20
>get the</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>old computer running so maybe . . =
>.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Maybe reseat the EDS cards. Don't =
>go too=20
>crazy yet.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Gantt Kushner" <<A=20
> href=3D"mailto:ganttmann@comcast.net">ganttmann@comcast.net</A>> =
>wrote in=20
> message <A=20
> href=3D"news:46b747e6$1@linux">news:46b747e6$1@linux</A>...</DIV><BR>I
=
>hate it=20
> when this happens! I have two violins, viola, 'cello, bass,=20
> clarinet,<BR>piano and two singers wating to record. Everything =
>was fine=20
> when I turned<BR>the system on this morning. I walk into the =
>control=20
> room to find the computer<BR>locked up. reboot and start Paris =
>and I get=20
> - "error in initialization;<BR>Paris Engine. Error code =
>-43/ffffffd5". =20
> Does anyone know what that means?<BR> I shut everything down and =
>rebooted=20
> - same result. I switch boot volumes<BR>- different OS, =
>different paris=20
> installation - same result. I switched my<BR>MEC to the EDS card =
>that=20
> lives in my old computer and Paris booted fine so<BR>it must be a =
>hardware=20
> problem.<BR><BR>I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) =
>with 3=20
> EDS cards in<BR>a Magma 13 slot expansion chassis. I guess the =
>first=20
> step is to strip it<BR>down to one EDS card in the Magma to see if I =
>can=20
> isolate a bad card. <BR><BR>Thank God I have multiply redundant=20
> redundancy systems running running here<BR>here. Else I'd have =
>some=20
> PISSED off people in my studio right now!<BR><BR>Moral of the story -
=
>Don't=20
> throw your old computer away! Keep one EDS card<BR>in it and =
>have it for=20
> a spare...<BR><BR>So - any thoughts about what "error in =
>initialization;=20
> Paris Engine. Error<BR>code -43/ffffffd5" =
>means?<BR><BR>Gantt</BLOCKQUOTE>
><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
>and=20
>you?<BR><A=20
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A> </FONT></DIV></BODY></HTML>
>
>
|
|
|
|
| Update - Re: HEEEELP! [message #88779 is a reply to message #88766] |
Mon, 06 August 2007 17:30 |
|
|
I pulled the EDS card formerly known as card "A". Now Paris will boot but
it won't open the "Default Project",
I get a message saying "an error occured while reading the "Default Project"
for new Project settings. A new empty Project will be created instead.
There are not enough free resources available".
Then I get a message saying "error creating new project. There are not enough
free resources available"
Then I try creating a new project and get a message saying "There is no source
connected to this input channel."
Then Paris crashes. Every time. I have clients sitting in the tracking
room tallking while I try to figure this out. I'm not having any fun.
I just put an EDS card inside the computer and left the Magma box off. same
result.
Where's Edmund when you need him?!?!
Gantt
"Gantt Kushner" <ganttmann@comcast.net> wrote:
>
>I hate it when this happens! I have two violins, viola, 'cello, bass, clarinet,
>piano and two singers wating to record. Everything was fine when I turned
>the system on this morning. I walk into the control room to find the computer
>locked up. reboot and start Paris and I get - "error in initialization;
>Paris Engine. Error code -43/ffffffd5". Does anyone know what that means?
> I shut everything down and rebooted - same result. I switch boot volumes
>- different OS, different paris installation - same result. I switched
my
>MEC to the EDS card that lives in my old computer and Paris booted fine
so
>it must be a hardware problem.
>
>I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS cards in
>a Magma 13 slot expansion chassis. I guess the first step is to strip it
>down to one EDS card in the Magma to see if I can isolate a bad card.
>
>Thank God I have multiply redundant redundancy systems running running here
>here. Else I'd have some PISSED off people in my studio right now!
>
>Moral of the story - Don't throw your old computer away! Keep one EDS card
>in it and have it for a spare...
>
>So - any thoughts about what "error in initialization; Paris Engine. Error
>code -43/ffffffd5" means?
>
>Gantt
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
|
|
| Re: HEEEELP! [message #88784 is a reply to message #88781] |
Mon, 06 August 2007 18:04 |
|
|
Hi Brad,
Yeah, I think you're right. I pulled one of the cards and bow the error
43 is gone, but paris still isn't happy. See my most recent post. Any thoughts?
Thanks!
gantt
"Brad Lyons" <brad@audioandmidi.com> wrote:
>
>I'm going off of memory here, but I believe that meant a dead EDS card.
I
>remember Error Code 43 (3) times and all (3) times were dead EDS cards (bad
>chips).
>
>Brad
>
>"Gantt Kushner" <ganttmann@comcast.net> wrote:
>>
>>I hate it when this happens! I have two violins, viola, 'cello, bass,
clarinet,
>>piano and two singers wating to record. Everything was fine when I turned
>>the system on this morning. I walk into the control room to find the computer
>>locked up. reboot and start Paris and I get - "error in initialization;
>>Paris Engine. Error code -43/ffffffd5". Does anyone know what that means?
>> I shut everything down and rebooted - same result. I switch boot volumes
>>- different OS, different paris installation - same result. I switched
>my
>>MEC to the EDS card that lives in my old computer and Paris booted fine
>so
>>it must be a hardware problem.
>>
>>I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS cards in
>>a Magma 13 slot expansion chassis. I guess the first step is to strip
it
>>down to one EDS card in the Magma to see if I can isolate a bad card.
>>
>>Thank God I have multiply redundant redundancy systems running running
here
>>here. Else I'd have some PISSED off people in my studio right now!
>>
>>Moral of the story - Don't throw your old computer away! Keep one EDS
card
>>in it and have it for a spare...
>>
>>So - any thoughts about what "error in initialization; Paris Engine. Error
>>code -43/ffffffd5" means?
>>
>>Gantt
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: HEEEELP! [message #88786 is a reply to message #88784] |
Mon, 06 August 2007 18:35 |
DJ
Messages: 1124
Registered: July 2005
|
Senior Member |
|
|
Gantt,
Go to the Paris.exe file in the Paris directory (if you are on PC.....I have
no idea if you are on Mac) and launch Paris directly from that. then
configure that project like you had your prefious default project and save
it as the new default project.
Deej
"Gantt Kushner" <ganttmann@comcast.net> wrote in message
news:46b7c510$1@linux...
>
> Hi Brad,
>
> Yeah, I think you're right. I pulled one of the cards and bow the error
> 43 is gone, but paris still isn't happy. See my most recent post. Any
> thoughts?
>
> Thanks!
>
> gantt
>
> "Brad Lyons" <brad@audioandmidi.com> wrote:
>>
>>I'm going off of memory here, but I believe that meant a dead EDS card.
> I
>>remember Error Code 43 (3) times and all (3) times were dead EDS cards
>>(bad
>>chips).
>>
>>Brad
>>
>>"Gantt Kushner" <ganttmann@comcast.net> wrote:
>>>
>>>I hate it when this happens! I have two violins, viola, 'cello, bass,
> clarinet,
>>>piano and two singers wating to record. Everything was fine when I
>>>turned
>>>the system on this morning. I walk into the control room to find the
>>>computer
>>>locked up. reboot and start Paris and I get - "error in initialization;
>>>Paris Engine. Error code -43/ffffffd5". Does anyone know what that
>>>means?
>>> I shut everything down and rebooted - same result. I switch boot
>>> volumes
>>>- different OS, different paris installation - same result. I switched
>>my
>>>MEC to the EDS card that lives in my old computer and Paris booted fine
>>so
>>>it must be a hardware problem.
>>>
>>>I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS cards in
>>>a Magma 13 slot expansion chassis. I guess the first step is to strip
> it
>>>down to one EDS card in the Magma to see if I can isolate a bad card.
>
>>>
>>>Thank God I have multiply redundant redundancy systems running running
> here
>>>here. Else I'd have some PISSED off people in my studio right now!
>>>
>>>Moral of the story - Don't throw your old computer away! Keep one EDS
> card
>>>in it and have it for a spare...
>>>
>>>So - any thoughts about what "error in initialization; Paris Engine.
>>>Error
>>>code -43/ffffffd5" means?
>>>
>>>Gantt
>>
>
|
|
|
|
| Re: HEEEELP! [message #88788 is a reply to message #88786] |
Mon, 06 August 2007 19:27 |
|
|
I've done the Mac equivalent of that. It gives me a bunch of error messages
and then crashes.
"DJ" <animix _ at _ animas _ dot _ net> wrote:
>Gantt,
>
>Go to the Paris.exe file in the Paris directory (if you are on PC.....I
have
>no idea if you are on Mac) and launch Paris directly from that. then
>configure that project like you had your prefious default project and save
>it as the new default project.
>
>Deej
>
>"Gantt Kushner" <ganttmann@comcast.net> wrote in message
>news:46b7c510$1@linux...
>>
>> Hi Brad,
>>
>> Yeah, I think you're right. I pulled one of the cards and bow the error
>> 43 is gone, but paris still isn't happy. See my most recent post. Any
>> thoughts?
>>
>> Thanks!
>>
>> gantt
>>
>> "Brad Lyons" <brad@audioandmidi.com> wrote:
>>>
>>>I'm going off of memory here, but I believe that meant a dead EDS card.
>> I
>>>remember Error Code 43 (3) times and all (3) times were dead EDS cards
>>>(bad
>>>chips).
>>>
>>>Brad
>>>
>>>"Gantt Kushner" <ganttmann@comcast.net> wrote:
>>>>
>>>>I hate it when this happens! I have two violins, viola, 'cello, bass,
>> clarinet,
>>>>piano and two singers wating to record. Everything was fine when I
>>>>turned
>>>>the system on this morning. I walk into the control room to find the
>>>>computer
>>>>locked up. reboot and start Paris and I get - "error in initialization;
>>>>Paris Engine. Error code -43/ffffffd5". Does anyone know what that
>>>>means?
>>>> I shut everything down and rebooted - same result. I switch boot
>>>> volumes
>>>>- different OS, different paris installation - same result. I switched
>>>my
>>>>MEC to the EDS card that lives in my old computer and Paris booted fine
>>>so
>>>>it must be a hardware problem.
>>>>
>>>>I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS cards
in
>>>>a Magma 13 slot expansion chassis. I guess the first step is to strip
>> it
>>>>down to one EDS card in the Magma to see if I can isolate a bad card.
>>
>>>>
>>>>Thank God I have multiply redundant redundancy systems running running
>> here
>>>>here. Else I'd have some PISSED off people in my studio right now!
>>>>
>>>>Moral of the story - Don't throw your old computer away! Keep one EDS
>> card
>>>>in it and have it for a spare...
>>>>
>>>>So - any thoughts about what "error in initialization; Paris Engine.
>>>>Error
>>>>code -43/ffffffd5" means?
>>>>
>>>>Gantt
>>>
>>
>
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: HEEEELP! [message #88790 is a reply to message #88788] |
Mon, 06 August 2007 20:27 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0155_01C7D881.556D8490
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Gantt,
If you're removing cards, external hardware, don't have a default =
project
available in your system! That royally screwed me I think on a PC.
Like DJ says, whatever you do with these changes, start Paris with
the .exe (whatever it's called on a Mac) and nothing else until things =
settle down.
I'm not convinced your EDS is trash either.
Tom
"Gantt Kushner" <ganttmann@comcast.net> wrote in message =
news:46b7d8a5$1@linux...
I've done the Mac equivalent of that. It gives me a bunch of error =
messages
and then crashes.
"DJ" <animix _ at _ animas _ dot _ net> wrote:
>Gantt,
>
>Go to the Paris.exe file in the Paris directory (if you are on =
PC.....I
have=20
>no idea if you are on Mac) and launch Paris directly from that. then=20
>configure that project like you had your prefious default project and =
save
>it as the new default project.
>
>Deej
>
>"Gantt Kushner" <ganttmann@comcast.net> wrote in message=20
>news:46b7c510$1@linux...
>>
>> Hi Brad,
>>
>> Yeah, I think you're right. I pulled one of the cards and bow the =
error
>> 43 is gone, but paris still isn't happy. See my most recent post. =
Any
>> thoughts?
>>
>> Thanks!
>>
>> gantt
>>
>> "Brad Lyons" <brad@audioandmidi.com> wrote:
>>>
>>>I'm going off of memory here, but I believe that meant a dead EDS =
card.
>> I
>>>remember Error Code 43 (3) times and all (3) times were dead EDS =
cards
>>>(bad
>>>chips).
>>>
>>>Brad
>>>
>>>"Gantt Kushner" <ganttmann@comcast.net> wrote:
>>>>
>>>>I hate it when this happens! I have two violins, viola, 'cello, =
bass,
>> clarinet,
>>>>piano and two singers wating to record. Everything was fine when =
I=20
>>>>turned
>>>>the system on this morning. I walk into the control room to find =
the
>>>>computer
>>>>locked up. reboot and start Paris and I get - "error in =
initialization;
>>>>Paris Engine. Error code -43/ffffffd5". Does anyone know what =
that=20
>>>>means?
>>>> I shut everything down and rebooted - same result. I switch boot =
>>>> volumes
>>>>- different OS, different paris installation - same result. I =
switched
>>>my
>>>>MEC to the EDS card that lives in my old computer and Paris booted =
fine
>>>so
>>>>it must be a hardware problem.
>>>>
>>>>I'm running Paris on a 1.25 gHz G4 (yup - a Mac guy) with 3 EDS =
cards
in
>>>>a Magma 13 slot expansion chassis. I guess the first step is to =
strip
>> it
>>>>down to one EDS card in the Magma to see if I can isolate a bad =
card.
>>
>>>>
>>>>Thank God I have multiply redundant redundancy systems running =
running
>> here
>>>>here. Else I'd have some PISSED off people in my studio right =
now!
>>>>
>>>>Moral of the story - Don't throw your old computer away! Keep one =
EDS
>> card
>>>>in it and have it for a spare...
>>>>
>>>>So - any thoughts about what "error in initialization; Paris =
Engine.
>>>>Error
>>>>code -43/ffffffd5" means?
>>>>
>>>>Gantt
>>>
>>=20
>
>
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0155_01C7D881.556D8490
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Gantt,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>If you're removing cards, external =
hardware, don't=20
have a default project</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>available in your system! That =
royally=20
screwed me I think on a PC.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Like DJ says, whatever you do with =
these changes,=20
start Paris with</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>the .exe (whatever it's called on a =
Mac) and=20
nothing else until things settle down.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I'm not convinced your EDS is trash=20
either.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Gantt Kushner" <<A=20
href=3D"mailto:ganttmann@comcast.net">ganttmann@comcast.net</A>> =
wrote in=20
message <A=20
=
href=3D"news:46b7d8a5$1@linux">news:46b7d8a5$1@linux</A>...</DIV><BR>I've=
done=20
the Mac equivalent of that. It gives me a bunch of error =
messages<BR>and=20
then crashes.<BR><BR>"DJ" <animix _ at _ animas _ dot _ net>=20
wrote:<BR>>Gantt,<BR>><BR>>Go to the Paris.exe file in the =
Paris=20
directory (if you are on PC.....I<BR>have <BR>>no idea if you are =
on Mac)=20
and launch Paris directly from that. then <BR>>configure that =
project like=20
you had your prefious default project and save<BR><BR>>it as the =
new=20
default project.<BR>><BR>>Deej<BR>><BR>> "Gantt Kushner" =
<<A=20
href=3D"mailto:ganttmann@comcast.net">ganttmann@comcast.net</A>> =
wrote in=20
message <BR>>news:46b7c510$1@linux...<BR>>><BR>>> Hi=20
Brad,<BR>>><BR>>> Yeah, I think you're right. I =
pulled one=20
of the cards and bow the error<BR>>> 43 is gone, but paris still =
isn't=20
happy. See my most recent post. Any<BR><BR>>>=20
thoughts?<BR>>><BR>>> Thanks!<BR>>><BR>>>=20
gantt<BR>>><BR>>> "Brad Lyons" <<A=20
href=3D"mailto:brad@audioandmidi.com">brad@audioandmidi.com</A>>=20
wrote:<BR>>>><BR>>>>I'm going off of memory here, =
but I=20
believe that meant a dead EDS card.<BR>>> =
I<BR>>>>remember=20
Error Code 43 (3) times and all (3) times were dead EDS=20
=
cards<BR><BR>>>>(bad<BR>>>>chips). <BR>>>><BR>&=
gt;>>Brad<BR>>>><BR>>>> "Gantt =20
Kushner" <<A=20
href=3D"mailto:ganttmann@comcast.net">ganttmann@comcast.net</A>>=20
wrote:<BR>>>>><BR>>>>>I hate it when this=20
happens! I have two violins, viola, 'cello, bass,<BR>>>=20
clarinet,<BR>>>>>piano and two singers wating to =
record. =20
Everything was fine when I =
<BR>>>>>turned<BR>>>>>the=20
system on this morning. I walk into the control room to find=20
the<BR><BR>>>>>computer<BR>>>>>locked =
up. reboot=20
and start Paris and I get - "error in =
initialization;<BR>>>>>Paris=20
Engine. Error code -43/ffffffd5". Does anyone know what that=20
<BR>>>>>means?<BR>>>>> I shut everything down =
and=20
rebooted - same result. I switch boot <BR>>>>>=20
volumes<BR>>>>>- different OS, different paris =
installation - same=20
result. I switched<BR>>>>my<BR>>>>>MEC to =
the EDS=20
card that lives in my old computer and Paris booted=20
fine<BR>>>>so<BR>>>>>it must be a hardware=20
problem.<BR>>>>><BR>>>>>I'm running Paris on a =
1.25=20
gHz G4 (yup - a Mac guy) with 3 EDS cards<BR>in<BR>>>>>a =
Magma 13=20
slot expansion chassis. I guess the first step is to =
strip<BR>>>=20
it<BR>>>>>down to one EDS card in the Magma to see if I =
can=20
isolate a bad =
card.<BR>>><BR>>>>> <BR>>>>>Thank=20
God I have multiply redundant redundancy systems running =
running<BR>>>=20
here<BR>>>>>here. Else I'd have some PISSED off =
people in my=20
studio right now!<BR>>>>><BR>>>>>Moral of the =
story -=20
Don't throw your old computer away! Keep one EDS<BR>>>=20
card<BR>>>>>in it and have it for a=20
spare...<BR>>>>><BR>>>>>So - any thoughts =
about=20
what "error in initialization; Paris=20
Engine.<BR><BR>>>>>Error<BR>>>>>code =
-43/ffffffd5"=20
=
means?<BR>>>>><BR>>>>>Gantt <BR>>>><BR>&g=
t;>=20
<BR>><BR>><BR></BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BODY ></HTML>
------=_NextPart_000_0155_01C7D881.556D8490--
|
|
|
|
| Re: HEEEELP! [message #88795 is a reply to message #88790] |
Mon, 06 August 2007 22:50 |
|
|
After MUCH futzing around w/ re-installing Paris, pulling cards out of the
Magma, installing them inside the computer, putting them back in the Magma,
and finally trashing the Default Project I'm up and running again.
Thanks for all the suggestions! God bless this newsgroup, one and all!
I'm pretty sure the original problem was a bad EDS card in the "A" slot.
Ill test my theory another time. I'm goin' to bed!
Gantt
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Gantt,
>If you're removing cards, external hardware, don't have a default =
>project
>available in your system! That royally screwed me I think on a PC.
>Like DJ says, whatever you do with these changes, start Paris with
>the .exe (whatever it's called on a Mac) and nothing else until things =
>settle down.
>I'm not convinced your EDS is trash either.
>Tom
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: HEEEELP! [message #88797 is a reply to message #88795] |
Tue, 07 August 2007 06:47 |
DJ
Messages: 1124
Registered: July 2005
|
Senior Member |
|
|
Glad you're up and running agina, at least. TheSoniq can probably fix your
card.
Deej
"Gantt Kushner" <ganttmann@comcast.net> wrote in message
news:46b8080d$1@linux...
>
> After MUCH futzing around w/ re-installing Paris, pulling cards out of the
> Magma, installing them inside the computer, putting them back in the
> Magma,
> and finally trashing the Default Project I'm up and running again.
>
> Thanks for all the suggestions! God bless this newsgroup, one and all!
> I'm pretty sure the original problem was a bad EDS card in the "A" slot.
> Ill test my theory another time. I'm goin' to bed!
>
> Gantt
>
> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>
>>
>>Gantt,
>>If you're removing cards, external hardware, don't have a default =
>>project
>>available in your system! That royally screwed me I think on a PC.
>>Like DJ says, whatever you do with these changes, start Paris with
>>the .exe (whatever it's called on a Mac) and nothing else until things =
>>settle down.
>>I'm not convinced your EDS is trash either.
>>Tom
>
>
|
|
|
|
Goto Forum:
Current Time: Tue Nov 05 04:39:31 PST 2024
Total time taken to generate the page: 0.39465 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
