The PARIS Forums: PARIS: Main » MEC B not passing audio

Home » The PARIS Forums » PARIS: Main » MEC B not passing audio

Show: Today's Messages :: Polls :: Message Navigator

MEC B not passing audio [message #107854]

Sat, 21 September 2013 16:35

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

HI Folks -

I have a few extra MECS and Cards here that I'm planning to hook up, BUT I want to take things slowly and make sure everything is working at each step before I proceed to the next one.

Seems I'm stuck fairly early on in the game.

Right now I have 2 EDS cards and 2 MECs, each card attached to its own MEC.
MEC A has 8 IN -> Slot 1; 8 OUT -> Slot 3; ADAT -> Slot 5
MEC B has 8 IN -> Slot 2; 8 OUT -> Slot 4

All modules, objects, MECS etc are recognized in the Patch Bay and PARIS loads up and plays fine. However, I cannot seem to get any audio to pass out of MEC B.

I have swapped 8 OUT cards back and forth between the MECs. I have tried routing from the Master section on MEC B; I have tried sending through Auxes, Inserts (with returns connected) and Mixer B L & R.

Any ideas? My next step is to swap the EDS cards connected and see if the problem follows a card, then I'd replace the MEC with another one here.

Thought I'd check to see if I'm missing something obvious first...

Thanks

Ted

Report message to a moderator

[Message index]

		MEC B not passing audio By: Ted Gerber on Sat, 21 September 2013 16:35
		Re: MEC B not passing audio By: mikeaudet on Sat, 21 September 2013 16:47
		Re: MEC B not passing audio By: Ted Gerber on Sat, 21 September 2013 19:04
		Re: MEC B not passing audio By: mikeaudet on Sun, 22 September 2013 04:44
		Re: MEC B not passing audio By: Ted Gerber on Sun, 22 September 2013 05:35

Previous Topic:	bounce to disk issues
Next Topic:	Mic Techniques - acoustic guitar

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Feb 17 14:35:38 PST 2025

Total time taken to generate the page: 0.02589 seconds