The PARIS Forums: PARIS: Main » Big Ben Setup Question

Home » The PARIS Forums » PARIS: Main » Big Ben Setup Question - 2 MECs (Big Ben Setup Question - 2 MECs)

Show: Today's Messages :: Polls :: Message Navigator

Big Ben Setup Question - 2 MECs [message #106890]

Thu, 26 January 2012 11:56

peter Kotsifas

Messages: 3
Registered: January 2007

Junior Member

Hi,

I recently purchased a Big Ben it seems to be working with my 'master' MEC, but not with the slave. I have connected it two different ways as follows:

1) Big Ben set at 44.1 Khz, WC out 1 and 2 plugged into MEC "Master" input and MEC "Slave" input.

2) Big Ben set at 44.1 Khz, WC out 1 into MEC "Master" input, and MEC "Master" output into MEC "Slave" input.

I had the same results with connecting it both ways as follows:

- MEC "Master" will configure to the External Word Clock at 44.1 Khz.

- MEC "Slave" is configured to Internal clock at 48 Khz.

Any suggestions?

Thanks,
Peter

Report message to a moderator

Re: Big Ben Setup Question - 2 MECs [message #106892 is a reply to message #106890]

Thu, 26 January 2012 14:30

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

IIRC the readout of MEC slave is not relevant when using an external clock ie- it doesn't matter what it says, it will function as you specify in the project window.

Also - pretty sure it's best to use your 1st setup. Passing clock signal through any other audio devices in a daisy chain setup can jumble it making the use of an external clock of no real value...

Ted

Report message to a moderator

Previous Topic:	Original PARIS machine dies at age 12
Next Topic:	Export stereo file

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jan 22 16:49:01 PST 2025

Total time taken to generate the page: 0.01529 seconds