The PARIS Forums: PARIS: Main » need help with paris

Home » The PARIS Forums » PARIS: Main » need help with paris

Show: Today's Messages :: Polls :: Message Navigator

need help with paris [message #81998]

Fri, 23 March 2007 03:34

michael
Messages: 13
Registered: March 2007

Junior Member

i have now get paris installed on pc/ with xp !!
it works THANK YOU AARON.
everything worked, but i have a little problem too:-(
i cant hear/see an signal in the mixer.
when i get in the audio window and push on the speaker icon for every single
track i hear the signal.
then i add this single track to mixer window and i hear nothing and see no
signal.
can anybody help me??

Report message to a moderator

Re: need help with paris [message #82001 is a reply to message #81998]

Fri, 23 March 2007 05:07

John [1]
Messages: 2229
Registered: September 2005

Senior Member

Is it possible that you have the audio outputs routed correctly in the patchbay
but you didn't add the mixer object? If it's there you might try removing
it and re-adding it, shutting down the pc completely and rebooting. The
patchbay definitely needs to be setup right.

Make sure nothing is solo'ed or muted also and crank the faders up of course.

Report message to a moderator

Re: need help with paris [message #82141 is a reply to message #82001]

Mon, 26 March 2007 12:58

michael
Messages: 13
Registered: March 2007

Junior Member

hy guys,
areally big thanx to john and aaron, my paris 3.0 is working fine with XP
!!!:-))
exactly " i'am stupid !
before i get this paris i've used an old mec with an 8 in card and there
i have never connect a patch from the MASTER mixer.
the only thing that i havnt is the response for the Challenge:-(
ok, i must send an email with my serial number to intelligent devices??
and they answer me with the response??
cherrz
michael
"John" <no@no.com> wrote:
>
>Is it possible that you have the audio outputs routed correctly in the patchbay
>but you didn't add the mixer object? If it's there you might try removing
>it and re-adding it, shutting down the pc completely and rebooting. The
>patchbay definitely needs to be setup right.
>
>Make sure nothing is solo'ed or muted also and crank the faders up of course.

Report message to a moderator

Previous Topic:	onboard compressor issues
Next Topic:	Now I need your help with my music here !!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jan 29 22:10:02 PST 2025

Total time taken to generate the page: 0.01202 seconds