The PARIS Forums


Home » The PARIS Forums » PARIS: Main » HELP!-No interface connected to master card error.18/12 code
HELP!-No interface connected to master card error.18/12 code [message #64215] Sun, 05 February 2006 21:31 Go to next message
Pete is currently offline  Pete
Messages: 7
Registered: February 2006
Junior Member
So I've gone out of town and decided to take a scaled down
version of my rig to do some mixing.
Previous settup:
4 EDS
2 MEC
PARIS 3.0 all clocked with GenX

I've brought with me 1 MEC and planned to use the internal clock.

Hooked everything up and I get error intializing PARIS engine.
No interface connected to master card.I've also gotten a 18/12
error.

In the Paris.cfg file I noticed MasterOutput Card=0.Should the 0
be an actual number(1 maybe)?

Any help?
Guess I should just not mess with the rig when its working.

TIA,
Pete
Re: HELP!-No interface connected to master card error.18/12 code [message #64228 is a reply to message #64215] Mon, 06 February 2006 08:42 Go to previous messageGo to next message
Pete is currently offline  Pete
Messages: 7
Registered: February 2006
Junior Member
Looks like the 18/12 is an ADAT issue,but I've only gotten this
1 time.

I didn't bring my GenX clock and I'm wondering if that is my
problem.I figured since I was using just 1 MEC I didn't need it
though most of my projects were clocked with it.
Figured I could open the projects then switch them to internal
clock;maybe I was wrong.I'm trying to open a default project
then opening the other projects,but no worky so far.

Pete

"Pete Ruthenburg" <ruthenburg@insightbb.com> wrote:
>
> So I've gone out of town and decided to take a scaled down
>version of my rig to do some mixing.
> Previous settup:
> 4 EDS
> 2 MEC
> PARIS 3.0 all clocked with GenX
>
>I've brought with me 1 MEC and planned to use the internal clock.
>
>Hooked everything up and I get error intializing PARIS engine.
>No interface connected to master card.I've also gotten a 18/12
>error.
>
>In the Paris.cfg file I noticed MasterOutput Card=0.Should the 0
>be an actual number(1 maybe)?
>
>Any help?
>Guess I should just not mess with the rig when its working.
>
>TIA,
>Pete
Re: HELP!-No interface connected to master card error.18/12 code [message #64232 is a reply to message #64228] Mon, 06 February 2006 08:32 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_004D_01C62B10.F63E58B0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Pete,
This happened to me using Paris XP and two
ADAT modules in one MEC. If you can lose an
ADAT module or split them into two MECs it
should be okay.
Tom
"Pete" <ruthenburg@insightbb.com> wrote in message =
news:43e76e53$1@linux...

Looks like the 18/12 is an ADAT issue,but I've only gotten this
1 time.

I didn't bring my GenX clock and I'm wondering if that is my
problem.I figured since I was using just 1 MEC I didn't need it
though most of my projects were clocked with it.
Figured I could open the projects then switch them to internal
clock;maybe I was wrong.I'm trying to open a default project=20
then opening the other projects,but no worky so far.

Pete

"Pete Ruthenburg" <ruthenburg@insightbb.com> wrote:
>
> So I've gone out of town and decided to take a scaled down=20
>version of my rig to do some mixing.
> Previous settup:
> 4 EDS
> 2 MEC
> PARIS 3.0 all clocked with GenX
>
>I've brought with me 1 MEC and planned to use the internal clock.
>
>Hooked everything up and I get error intializing PARIS engine.
>No interface connected to master card.I've also gotten a 18/12
>error.
>
>In the Paris.cfg file I noticed MasterOutput Card=3D0.Should the 0
>be an actual number(1 maybe)?
>
>Any help?
>Guess I should just not mess with the rig when its working.
>
>TIA,
>Pete

------=_NextPart_000_004D_01C62B10.F63E58B0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>This happened to me using Paris XP and=20
two</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ADAT modules in one MEC.&nbsp; If you =
can lose=20
an</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ADAT module or split them into two MECs =

it</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>should be okay.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Pete" &lt;<A=20
=
href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>&gt;=
wrote=20
in message <A=20
=
href=3D"news:43e76e53$1@linux">news:43e76e53$1@linux</A>...</DIV><BR>Look=
s like=20
the 18/12 is an ADAT issue,but I've only gotten this<BR>1 =
time.<BR><BR>I=20
didn't bring my GenX clock and I'm wondering if that is =
my<BR>problem.I=20
figured since I was using just 1 MEC I didn't need it<BR>though most =
of my=20
projects were clocked with it.<BR>&nbsp; Figured I could open the =
projects=20
then switch them to internal<BR>clock;maybe I was wrong.I'm trying to =
open a=20
default project <BR>then opening the other projects,but no worky so=20
far.<BR><BR>Pete<BR><BR>"Pete Ruthenburg" &lt;<A=20
=
href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>&gt;=
=20
wrote:<BR>&gt;<BR>&gt; So I've gone out of town and decided to take a =
scaled=20
down <BR>&gt;version of my rig to do some mixing.<BR>&gt;&nbsp; =
Previous=20
=
settup:<BR> &gt;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&a mp;nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;=20
4=20
=
EDS<BR> &gt;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&a mp;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n bsp;&nbsp;=20
2=20
=
MEC<BR> &gt;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&a mp;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n bsp;&nbsp;=20
PARIS 3.0 all clocked with GenX<BR>&gt;<BR>&gt;I've brought with me 1 =
MEC and=20
planned to use the internal clock.<BR>&gt;<BR>&gt;Hooked everything up =
and I=20
get error intializing PARIS engine.<BR>&gt;No interface connected to =
master=20
card.I've also gotten a 18/12<BR>&gt;error.<BR>&gt;<BR>&gt;In the =
Paris.cfg=20
file I noticed MasterOutput Card=3D0.Should the 0<BR>&gt;be an actual =
number(1=20
maybe)?<BR>&gt;<BR>&gt;Any help?<BR>&gt;Guess I should just not mess =
with the=20
rig when its=20
working.<BR>&gt;<BR>&gt;TIA,<BR>&gt;Pete<BR ></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_004D_01C62B10.F63E58B0--
Re: HELP!-No interface connected to master card error.18/12 code [message #64237 is a reply to message #64232] Mon, 06 February 2006 10:24 Go to previous messageGo to next message
Pete is currently offline  Pete
Messages: 7
Registered: February 2006
Junior Member
I've got 1 ADAT in the mec,but I don't thik this is the
problem.

I installed 1 EDS and it was saying not enough free resources.
I was getting gcCreateControl:ran out of controllers.[0/0}

Still wondering if I had my word clock would I have had these
issues at all;should of remembered to bring the damn thing.

Pete


"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Pete,
>This happened to me using Paris XP and two
>ADAT modules in one MEC. If you can lose an
>ADAT module or split them into two MECs it
>should be okay.
>Tom
> "Pete" <ruthenburg@insightbb.com> wrote in message =
>news:43e76e53$1@linux...
>
> Looks like the 18/12 is an ADAT issue,but I've only gotten this
> 1 time.
>
> I didn't bring my GenX clock and I'm wondering if that is my
> problem.I figured since I was using just 1 MEC I didn't need it
> though most of my projects were clocked with it.
> Figured I could open the projects then switch them to internal
> clock;maybe I was wrong.I'm trying to open a default project=20
> then opening the other projects,but no worky so far.
>
> Pete
>
> "Pete Ruthenburg" <ruthenburg@insightbb.com> wrote:
> >
> > So I've gone out of town and decided to take a scaled down=20
> >version of my rig to do some mixing.
> > Previous settup:
> > 4 EDS
> > 2 MEC
> > PARIS 3.0 all clocked with GenX
> >
> >I've brought with me 1 MEC and planned to use the internal clock.
> >
> >Hooked everything up and I get error intializing PARIS engine.
> >No interface connected to master card.I've also gotten a 18/12
> >error.
> >
> >In the Paris.cfg file I noticed MasterOutput Card=3D0.Should the 0
> >be an actual number(1 maybe)?
> >
> >Any help?
> >Guess I should just not mess with the rig when its working.
> >
> >TIA,
> >Pete
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>This happened to me using Paris XP and=20
>two</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ADAT modules in one MEC.  If you =
>can lose=20
>an</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ADAT module or split them into two MECs
=
>
>it</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>should be okay.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Pete" <<A=20
> =
>href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>>=
> wrote=20
> in message <A=20
> =
>href=3D"news:43e76e53$1@linux">news:43e76e53$1@linux</A>...</DIV><BR>Look=
>s like=20
> the 18/12 is an ADAT issue,but I've only gotten this<BR>1 =
>time.<BR><BR>I=20
> didn't bring my GenX clock and I'm wondering if that is =
>my<BR>problem.I=20
> figured since I was using just 1 MEC I didn't need it<BR>though most =
>of my=20
> projects were clocked with it.<BR>  Figured I could open the =
>projects=20
> then switch them to internal<BR>clock;maybe I was wrong.I'm trying to
=
>open a=20
> default project <BR>then opening the other projects,but no worky so=20
> far.<BR><BR>Pete<BR><BR>"Pete Ruthenburg" <<A=20
> =
>href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>>=
>=20
> wrote:<BR>><BR>> So I've gone out of town and decided to take a =
>scaled=20
> down <BR>>version of my rig to do some mixing.<BR>>  =
>Previous=20
> =
>settup:<BR>>         &nbs=
>p;        =20
> 4=20
> =
>EDS<BR>>          &n=
>bsp;       =20
> 2=20
> =
>MEC<BR>>          &n=
>bsp;       =20
> PARIS 3.0 all clocked with GenX<BR>><BR>>I've brought with me 1 =
>MEC and=20
> planned to use the internal clock.<BR>><BR>>Hooked everything up =
>and I=20
> get error intializing PARIS engine.<BR>>No interface connected to =
>master=20
> card.I've also gotten a 18/12<BR>>error.<BR>><BR>>In the =
>Paris.cfg=20
> file I noticed MasterOutput Card=3D0.Should the 0<BR>>be an actual =
>number(1=20
> maybe)?<BR>><BR>>Any help?<BR>>Guess I should just not mess =
>with the=20
> rig when its=20
>working.<BR>><BR>>TIA,<BR>>Pete<BR></BLOCKQUOTE></BODY ></HTML>
>
>
Re: HELP!-No interface connected to master card error.18/12 code [message #64239 is a reply to message #64232] Mon, 06 February 2006 10:34 Go to previous messageGo to next message
Pete is currently offline  Pete
Messages: 7
Registered: February 2006
Junior Member
forgot to say when I have the 1 EDS installed it intializes,
but after that is when I get the not enough free resources
error.

Thanks Tom,
Pete

"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Pete,
>This happened to me using Paris XP and two
>ADAT modules in one MEC. If you can lose an
>ADAT module or split them into two MECs it
>should be okay.
>Tom
> "Pete" <ruthenburg@insightbb.com> wrote in message =
>news:43e76e53$1@linux...
>
> Looks like the 18/12 is an ADAT issue,but I've only gotten this
> 1 time.
>
> I didn't bring my GenX clock and I'm wondering if that is my
> problem.I figured since I was using just 1 MEC I didn't need it
> though most of my projects were clocked with it.
> Figured I could open the projects then switch them to internal
> clock;maybe I was wrong.I'm trying to open a default project=20
> then opening the other projects,but no worky so far.
>
> Pete
>
> "Pete Ruthenburg" <ruthenburg@insightbb.com> wrote:
> >
> > So I've gone out of town and decided to take a scaled down=20
> >version of my rig to do some mixing.
> > Previous settup:
> > 4 EDS
> > 2 MEC
> > PARIS 3.0 all clocked with GenX
> >
> >I've brought with me 1 MEC and planned to use the internal clock.
> >
> >Hooked everything up and I get error intializing PARIS engine.
> >No interface connected to master card.I've also gotten a 18/12
> >error.
> >
> >In the Paris.cfg file I noticed MasterOutput Card=3D0.Should the 0
> >be an actual number(1 maybe)?
> >
> >Any help?
> >Guess I should just not mess with the rig when its working.
> >
> >TIA,
> >Pete
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>This happened to me using Paris XP and=20
>two</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ADAT modules in one MEC.  If you =
>can lose=20
>an</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>ADAT module or split them into two MECs
=
>
>it</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>should be okay.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Pete" <<A=20
> =
>href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>>=
> wrote=20
> in message <A=20
> =
>href=3D"news:43e76e53$1@linux">news:43e76e53$1@linux</A>...</DIV><BR>Look=
>s like=20
> the 18/12 is an ADAT issue,but I've only gotten this<BR>1 =
>time.<BR><BR>I=20
> didn't bring my GenX clock and I'm wondering if that is =
>my<BR>problem.I=20
> figured since I was using just 1 MEC I didn't need it<BR>though most =
>of my=20
> projects were clocked with it.<BR>  Figured I could open the =
>projects=20
> then switch them to internal<BR>clock;maybe I was wrong.I'm trying to
=
>open a=20
> default project <BR>then opening the other projects,but no worky so=20
> far.<BR><BR>Pete<BR><BR>"Pete Ruthenburg" <<A=20
> =
>href=3D"mailto:ruthenburg@insightbb.com">ruthenburg@insightbb.com</A>>=
>=20
> wrote:<BR>><BR>> So I've gone out of town and decided to take a =
>scaled=20
> down <BR>>version of my rig to do some mixing.<BR>>  =
>Previous=20
> =
>settup:<BR>>         &nbs=
>p;        =20
> 4=20
> =
>EDS<BR>>          &n=
>bsp;       =20
> 2=20
> =
>MEC<BR>>          &n=
>bsp;       =20
> PARIS 3.0 all clocked with GenX<BR>><BR>>I've brought with me 1 =
>MEC and=20
> planned to use the internal clock.<BR>><BR>>Hooked everything up =
>and I=20
> get error intializing PARIS engine.<BR>>No interface connected to =
>master=20
> card.I've also gotten a 18/12<BR>>error.<BR>><BR>>In the =
>Paris.cfg=20
> file I noticed MasterOutput Card=3D0.Should the 0<BR>>be an actual =
>number(1=20
> maybe)?<BR>><BR>>Any help?<BR>>Guess I should just not mess =
>with the=20
> rig when its=20
>working.<BR>><BR>>TIA,<BR>>Pete<BR></BLOCKQUOTE></BODY ></HTML>
>
>
Re: HELP!-No interface connected to master card error.18/12 code [message #64240 is a reply to message #64239] Mon, 06 February 2006 09:42 Go to previous messageGo to next message
Curt Cassingham is currently offline  Curt Cassingham   UNITED STATES
Messages: 21
Registered: May 2008
Junior Member
On 2/6/2006 10:34 AM, Pete wrote:

> forgot to say when I have the 1 EDS installed it intializes,
> but after that is when I get the not enough free resources
> error.

Windows or Mac? Did you try a completely fresh install? IOW, let PARIS create its own new Config files, etc?

I had a similar situation here. I have just one EDS card and a 442 on Win XP. System working fine until I installed a new PCI card (unrelated to PARIS) in the computer, and had to rearrange all the PCI cards including the EDI to different slots. Finally found out in the Hardware Manager the computer thought the EDS card was still in the old slot. I uninstalled the card from Hardware Manger, thereby forcing it to realize the new card location, reinstalled PARIS, and all was fine.

Curt
curt <at> curtcass <dot> com
Re: HELP!-No interface connected to master card error.18/12 code [message #64247 is a reply to message #64240] Mon, 06 February 2006 11:21 Go to previous messageGo to next message
Pete is currently offline  Pete
Messages: 7
Registered: February 2006
Junior Member
Hi Curt,
On XP here.I've now got 1 EDS ,took out the ADAT card from the
MEC.I'm about to take out the other 8in and 8 out and try that.
Its looking like I'm going to have trouble getting a 1EDS
stripped down MEC running.
When I try and open a default project it says there aren't
enough resources.Guess I might have to do a fresj install.

Thanks,
Pete

Curt Cassingham <mail@mail.com> wrote:
>On 2/6/2006 10:34 AM, Pete wrote:
>
>> forgot to say when I have the 1 EDS installed it intializes,
>> but after that is when I get the not enough free resources
>> error.
>
>Windows or Mac? Did you try a completely fresh install? IOW, let PARIS
create its
>own new Config files, etc?
>
>I had a similar situation here. I have just one EDS card and a 442 on Win
XP. System
>working fine until I installed a new PCI card (unrelated to PARIS) in the
computer,
>and had to rearrange all the PCI cards including the EDI to different slots.
Finally
>found out in the Hardware Manager the computer thought the EDS card was
still in the
>old slot. I uninstalled the card from Hardware Manger, thereby forcing
it to realize
>the new card location, reinstalled PARIS, and all was fine.
>
>Curt
>curt <at> curtcass <dot> com
Re: HELP!-No interface connected to master card error.18/12 code [message #64249 is a reply to message #64247] Mon, 06 February 2006 10:43 Go to previous messageGo to next message
EK Sound is currently offline  EK Sound   CANADA
Messages: 939
Registered: June 2005
Senior Member
Is your EDS card in a PCI slot that is sharing resources with
something else? Check your IRQ's

David.

Pete wrote:
> Hi Curt,
> On XP here.I've now got 1 EDS ,took out the ADAT card from the
> MEC.I'm about to take out the other 8in and 8 out and try that.
> Its looking like I'm going to have trouble getting a 1EDS
> stripped down MEC running.
> When I try and open a default project it says there aren't
> enough resources.Guess I might have to do a fresj install.
>
> Thanks,
> Pete
>
> Curt Cassingham <mail@mail.com> wrote:
>
>>On 2/6/2006 10:34 AM, Pete wrote:
>>
>>
>>>forgot to say when I have the 1 EDS installed it intializes,
>>>but after that is when I get the not enough free resources
>>>error.
>>
>>Windows or Mac? Did you try a completely fresh install? IOW, let PARIS
>
> create its
>
>>own new Config files, etc?
>>
>>I had a similar situation here. I have just one EDS card and a 442 on Win
>
> XP. System
>
>>working fine until I installed a new PCI card (unrelated to PARIS) in the
>
> computer,
>
>>and had to rearrange all the PCI cards including the EDI to different slots.
>
> Finally
>
>>found out in the Hardware Manager the computer thought the EDS card was
>
> still in the
>
>>old slot. I uninstalled the card from Hardware Manger, thereby forcing
>
> it to realize
>
>>the new card location, reinstalled PARIS, and all was fine.
>>
>>Curt
>>curt <at> curtcass <dot> com
>
>
Re: HELP!-No interface connected to master card error.18/12 code [message #64269 is a reply to message #64249] Mon, 06 February 2006 19:47 Go to previous message
Pete is currently offline  Pete
Messages: 7
Registered: February 2006
Junior Member
Checked the IRQs;all is good.When I have 1 EDS installed it
intializes,but then gives me I/O is different than before.Hit ok
it gives me same error,hit ok again then gives me error creating
default project adn a new project will be opened.Then I get
not enough resources and the gcCreateControl error.

If I have all 4 EDS cards in I just get "no interface connected
to master card"when intializing.Still wondering if having my
wordclock connected would fix this.

Thanks,
Pete

EK Sound <spamnot.info@eksoundNO.com> wrote:
>Is your EDS card in a PCI slot that is sharing resources with
>something else? Check your IRQ's
>
>David.
>
>Pete wrote:
>> Hi Curt,
>> On XP here.I've now got 1 EDS ,took out the ADAT card from the
>> MEC.I'm about to take out the other 8in and 8 out and try that.
>> Its looking like I'm going to have trouble getting a 1EDS
>> stripped down MEC running.
>> When I try and open a default project it says there aren't
>> enough resources.Guess I might have to do a fresj install.
>>
>> Thanks,
>> Pete
>>
>> Curt Cassingham <mail@mail.com> wrote:
>>
>>>On 2/6/2006 10:34 AM, Pete wrote:
>>>
>>>
>>>>forgot to say when I have the 1 EDS installed it intializes,
>>>>but after that is when I get the not enough free resources
>>>>error.
>>>
>>>Windows or Mac? Did you try a completely fresh install? IOW, let PARIS
>>
>> create its
>>
>>>own new Config files, etc?
>>>
>>>I had a similar situation here. I have just one EDS card and a 442 on
Win
>>
>> XP. System
>>
>>>working fine until I installed a new PCI card (unrelated to PARIS) in
the
>>
>> computer,
>>
>>>and had to rearrange all the PCI cards including the EDI to different
slots.
>>
>> Finally
>>
>>>found out in the Hardware Manager the computer thought the EDS card was
>>
>> still in the
>>
>>>old slot. I uninstalled the card from Hardware Manger, thereby forcing
>>
>> it to realize
>>
>>>the new card location, reinstalled PARIS, and all was fine.
>>>
>>>Curt
>>>curt <at> curtcass <dot> com
>>
>>
Previous Topic: OT-Hollywood types
Next Topic: OT: iPOD owners - check this out
Goto Forum:
  


Current Time: Thu Dec 05 06:24:48 PST 2024

Total time taken to generate the page: 0.01392 seconds