The PARIS Forums: PARIS: Main » EDS Cable Connect

Home » The PARIS Forums » PARIS: Main » EDS Cable Connect (Connecting 2 EDS 1000 Card, EMU Paris Pro & Ensoniq Paris, CS16)

Show: Today's Messages :: Polls :: Message Navigator

EDS Cable Connect [message #107195]

Sat, 04 August 2012 02:31

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

Hi there,

i don't get it. Embarassed

Had i connect every Plug of first EDS card into second Card ? See the the colored arrows on picture.

Does the old IDE Cable means old 40 or 80 ATA Cable like other Thread for selfmade Cable ?

Please forgive my bad English Rolling Eyes

I have 2 Mec 2 C16 and 2 EDS.

Attachment: connecting EDS.png
(Size: 223.31KB, Downloaded 522 times)

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Sun, 12 August 2012 06:43]

Report message to a moderator

Re: EDS Cable Connect [message #107197 is a reply to message #107195]

Sat, 04 August 2012 11:21

imajon

Messages: 55
Registered: June 2009
Location: Wisconsin

Member

Hey Dan
It looks from your pic you need to cross over your larger 16 pin ribbon cables (A and B)

C-----C
A-----B
B-----A
C1 C2

Slot A is at rear of card and is the larger connector.
It must cross over to B on 2 Card 2 and likewise B on Card 1 crosses over to A on card 2

Keep red stripe all to rear or all to front it doesn't matter which as long as all the same direction.

Any old IDE Cable will work. Just peel the appropriate number of wires for the cable you are to make. I have made them myself no problems.

Connectors here
http://www.pacificcable.com/More_Pages/IDEIDHCon/IDE-Ribbon- Cable-Connector.html

Important if you make them to have the connector orientated properly so that the polarization indicator on the connector is
facing same direction in relationship to red stripe (or however you mark it)on both ends of completed cable.
imajon

[Updated on: Sat, 04 August 2012 12:14]

Report message to a moderator

Re: EDS Cable Connect [message #107200 is a reply to message #107197]

Sun, 05 August 2012 11:41

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

THX !!

It runs. But there is only one Problem left.
One CS16 is only runnig.
I tried the 2 RJ45 of the 2 EDS at both Cs16 one runs every time, but the other don't runs. My both systmes are Ensoniq Paris and the other is Emu Paris Pro.
At the Ensoniq Paris CS16 is blinking the Dim LED. The other one PAris Pro CS16 not when i connected every RJ45 Cable.
I believe one of the CS16 is damaged.
Got someone have this Problem too ???
If one of the CS16 damaged ?

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

Report message to a moderator

Re: EDS Cable Connect [message #107205 is a reply to message #107200]

Mon, 06 August 2012 20:50

imajon

Messages: 55
Registered: June 2009
Location: Wisconsin

Member

If working CS16 led blinks when connect to card a or b but the CS16 Pro dosen't when connected to a or b then Id say it IS the Pro CS16 that has the issue.

Report message to a moderator

Re: EDS Cable Connect [message #107207 is a reply to message #107205]

Tue, 07 August 2012 16:12

Wayne

Messages: 206
Registered: July 2008
Location: Las Vegas

Senior Member

Have you checked and/or unchecked the C16Pro "blue" or C16 "black" in the Project window settings for the appropriate C16? This makes a big difference.

[Updated on: Tue, 07 August 2012 16:12]

Report message to a moderator

Re: EDS Cable Connect [message #107218 is a reply to message #107207]

Sun, 12 August 2012 06:39

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

I Have checked the settings, but nothings happend. I have to open the CS16 to check RJ45 Socket.

Have someone opened a CS16, can something damaged easly if it opened ?
There are any special things i have to look for ?

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Sun, 12 August 2012 06:40]

Report message to a moderator

Re: EDS Cable Connect [message #107220 is a reply to message #107218]

Sun, 12 August 2012 14:35

kerryg

Messages: 1529
Registered: February 2009

Senior Member
Administrator

C16s can be safely opened with reasonable care - in fact this might be a good time to clean and maintain it. Full illustrated instructions are here, courtesy of Aaron Allen.

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

Report message to a moderator

Re: EDS Cable Connect [message #107232 is a reply to message #107220]

Wed, 22 August 2012 09:51

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

THX

for fast answear !

I will replay if i find the problem !

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

Report message to a moderator

Re: EDS Cable Connect [message #107330 is a reply to message #107232]

Thu, 22 November 2012 06:29

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

i have to pull on the big ribbon inside cs 16. It was plugged of while transport.

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Sun, 26 July 2015 06:56]

Report message to a moderator

Previous Topic:	C16
Next Topic:	Sorry for the interruption!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 07 01:54:46 PST 2024

Total time taken to generate the page: 0.01894 seconds