The PARIS Forums: PARIS: Main » Dimitrios

Home » The PARIS Forums » PARIS: Main » Dimitrios - ADAT bug??

Show: Today's Messages :: Polls :: Message Navigator

Dimitrios - ADAT bug?? [message #83210]

Mon, 16 April 2007 21:37

Sandy Tipping

Messages: 54
Registered: June 2007

Member

This is a repost regarding your problem where 2 output channels don't work
on one of your ADAT cards.

Dimitrios,

I have this problem on some of my ADAT cards and I'm using WinME for my rig,
and I think I concluded it was a problem with the EDS card.
I have (1) loaded MEC (2 of everything). At one time, I used an ADAT loop
for realtime dumping of 8 tracks (8 insert sends to 8 new tracks, printed).
But 3 and 4 never worked. I swapped the EDS card that the MEC was connected
to (after swapping out the ADAT card twice) and things were healed.
Never bothered to do an exhaustive investigation - just chalked it up to
Paris weirdness.
Try a different EDS card in the same position on your mobo, connected to the
same MEC / ADAT combination. See if that does anything...

Sandy

Report message to a moderator

Re: Dimitrios - ADAT bug?? [message #83231 is a reply to message #83210]

Tue, 17 April 2007 01:26

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Thanks Sandy !
As soon as I finish some projects will try switching cards...
Regards,
Dimitrios

"Sandy Tipping" <tippsand@earthling.net> wrote:
>This is a repost regarding your problem where 2 output channels don't work

>on one of your ADAT cards.
>
>Dimitrios,
>
>I have this problem on some of my ADAT cards and I'm using WinME for my
rig,
>and I think I concluded it was a problem with the EDS card.
>I have (1) loaded MEC (2 of everything). At one time, I used an ADAT loop
>for realtime dumping of 8 tracks (8 insert sends to 8 new tracks, printed).
>But 3 and 4 never worked. I swapped the EDS card that the MEC was connected
>to (after swapping out the ADAT card twice) and things were healed.
>Never bothered to do an exhaustive investigation - just chalked it up to
>Paris weirdness.
>Try a different EDS card in the same position on your mobo, connected to
the
>same MEC / ADAT combination. See if that does anything...
>
>Sandy
>
>

Report message to a moderator

Previous Topic:	The new Final Cut Studio
Next Topic:	Interesting live recording experiment

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 22 02:23:55 PDT 2025

Total time taken to generate the page: 0.00809 seconds