|
|
|
|
| Re: OK you guys....package deals *cheap* [message #54029 is a reply to message #54019] |
Mon, 05 February 2007 21:51   |
BT
Messages: 19
Registered: February 2007
|
Junior Member |
|
|
omcast.net" target="_blank">gbtank@comcast.net> wrote in message news:45c817df@linux...
> I'll take the 4 blackface ADAT modules, if they're still available.
> Thanks.
>
> Regards,
> Brian T
>
> DJ wrote:
>> Update:
>>
>> 5 x ADAT modules (4 x blackface, 1 x blueface)-$200.00 each
>>
>> 1 x bundle consisting of MEC, C-16, IF2 and SCSI cable-$150.00. Has all
>> front and back plates.
>>
>> 1 x bundle consisting of MEC, C-16, IF2 and SCSI cable-$125.00. The MEC
>> has the rivets missing on the bottom of the chassis so the bottom plate
>> is attached withblack gaffer's tape. Has all front and back plates.
>>
>> I x MEC missing a number of front and back plates-Everything works fine
>> except the IF2 port-$50.00
>>
>> 2 x Midiman Digipatch units - $250.00 each
>>
>> 1 x Sony MU-R201 stereo Reverb - $200.00
>>
>> 1 x Magma 7 slot chassis-needs works fine but could use some tightening
>> of the IEC receptacle on the PSU includes both host cards and ribbon
>> cable. - $200.00
>>
>> 1 x 13 slot Magma-includes 2 x host cards and ribbon cable-$400.00
>>
>> 1 x set EDS connector cables (these are longer than the normal EDSX
>> connectors)-$35.00
>>
>>
>>
>>
>>
>> "DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45bfcaaf@linux...
>>> I'm in a frenzy of boxing up all this stuff. Trying to figure out a way
>>> to provide something of value for a good price. Here's what I've come up
>>> with.
>>>
>>> 1 x Mec, 1 x IF2 (gives you a total of 8 x ins and 8 x outs if you
>>> include the coax port) plus SCSI cable and a C-16 for just $150.00
>>>
>>> I've got 3 x of these bundles. Get 'em before they hit EBay.
>>>
>>> all of the 24 bit input and output modules are gone.
>>>
>>> 5 X ADAT modules remaining $200.00 each................you guys need
>>> these if you're going to use farm systems streaming audio into Paris. My
>>> ADAT modules are studio veterans and know the drill. Don't take a chance
>>> on being embarrassed in the middle of a session when some amateur ADAT
>>> module clams a take.
>>>
>>> only 1 x EDS card left............
>>>
>>> 2 x of the 15' SCSI ca
Regards,
Brian T
|
|
|
|
| Re: OK you guys....package deals *cheap* [message #54030 is a reply to message #54029] |
Mon, 05 February 2007 22:23 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
bles left. these things are great to put sojme
>>> distance between your computer and MEC if noise is an issue.
>>>
>>> ;o)
>>>
>>> Deej
>>>
>>> animix at animas dot net
>>>
>>> 970-375-7081
>>>
>>>
>>>
>>>
>>>
>>Whoa..
Cheers,
TC
BT wrote:
> I'll take the 4 blackface ADAT modules, if they're still available. Thanks.
>
> Regards,
> Brian T
>
> DJ wrote:This is a multi-part message in MIME format.
------=_NextPart_000_01D4_01C749EC.32F4C500
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Fleeting by . . .
"TC" <tc@spammetodeathyoubastards.org> wrote in message =
news:45c8217c@linux...
Whoa..
Cheers,
TC
BT wrote:
> I'll take the 4 blackface ADAT modules, if they're still available. =
Thanks.
>=20
> Regards,
> Brian T
>=20
> DJ wrote:
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_01D4_01C749EC.32F4C500
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Fleeting by . . .</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"TC" <<A=20
=
href=3D"mailto:tc@spammetodeathyoubastards.org">tc@spammetodeathyoubastar=
ds.org</A>>=20
wrote in message <A=20
=
href=3D"news:45c8217c@linux">news:45c8217c@linux</A>...</DIV>Whoa..<BR><B=
R>Cheers,<BR><BR>TC<BR><BR>BT=20
wrote:<BR>> I'll take the 4 blackface ADAT modules, if they're =
still=20
available. Thanks.<BR>> <BR>> Regards,<BR>> Brian T<BR>> =
<BR>>=20
DJ wrote:</BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
hre
|
|
|
|
|
|
| Re: OK you guys....package deals *cheap* [message #54032 is a reply to message #54031] |
Tue, 06 February 2007 09:42 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
nbsp; </FONT></DIV></BODY ></HTML>
------=_NextPart_000_01D4_01C749EC.32F4C500--Brian,
Sent you a PM.
DJ
"BT" <gbtank@comcast.net> wrote in message news:45c817df@linux...
> I'll take the 4 blackface ADAT modules, if they're still available.
> Thanks.
>
> Regards,
> Brian T
>
> DJ wrote:
>> Update:
>>
>> 5 x ADAT modules (4 x blackface, 1 x blueface)-$200.00 each
>>
>> 1 x bundle consisting of MEC, C-16, IF2 and SCSI cable-$150.00. Has all
>> front and back plates.
>>
>> 1 x bundle consisting of MEC, C-16, IF2 and SCSI cable-$125.00. The MEC
>> has the rivets missing on the bottom of the chassis so the bottom plate
>> is attached withblack gaffer's tape. Has all front and back plates.
>>
>> I x MEC missing a number of front and back plates-Everything works fine
>> except the IF2 port-$50.00
>>
>> 2 x Midiman Digipatch units - $250.00 each
>>
>> 1 x Sony MU-R201 stereo Reverb - $200.00
>>
>> 1 x Magma 7 slot chassis-needs works fine but could use some tightening
>> of the IEC receptacle on the PSU includes both host cards and ribbon
>> cable. - $200.00
>>
>> 1 x 13 slot Magma-includes 2 x host cards and ribbon cable-$400.00
>>
>> 1 x set EDS connector cables (these are longer than the normal EDSX
>> connectors)-$35.00
>>
>>
>>
>>
>>
>> "DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45bfcaaf@linux...
>>> I'm in a frenzy of boxing up all this stuff. Trying to figure out a way
>>> to provide something of value for a good price. Here's what I've come up
>>> with.
>>>
>>> 1 x Mec, 1 x IF2 (gives you a total of 8 x ins and 8 x outs if you
>>> include the coax port) plus SCSI cable and a C-16 for just $150.00
>>>
>>> I've got 3 x of these bundles. Get 'em before they hit EBay.
>>>
>>> all of the 24 bit input and output modules are gone.
>>>
>>> 5 X ADAT modules remaining $200.00 each................you guys need
>>> these if you're going to use farm systems streaming audio into Paris. My
>>> ADAT modules are studio veterans and know the drill. Don't take a chance
>>> on being embarrassed in the middle of a session when some amateur ADAT
>>> module clams a take.
>>>
>>> only 1 x EDS card left............
>>>
>>> 2 x of the 15' SCSI cables left. these things are great to put sojme
|
|
|
|
| Re: OK you guys....package deals *cheap* [message #54033 is a reply to message #54029] |
Tue, 06 February 2007 13:40 |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
>>> distance between your computer and MEC if noise is an issue.
>>>
>>> ;o)
>>>
>>> Deej
>>>
>>> animix at animas dot net
>>>
>>> 970-375-7081
>>>
>>>
>>>
>>>
>>>
>>2 x ADAT modules $200.00
2 x Midiman Digipatch units-$200.00
1 Sony MU-R201 - $200.00 (this is a cool piece and worth the $$ if you need
and outboard stereo reverb/multiFX box) If this doesn't sell at this price
it's going back in my rack.
Bundle with MEC, SCSI cable C-16 and IF2 (bottom panel of MEC is held on
with black gaffer's tape. It's very secure and not visible from front of
unit. Has all front and back plates)-$125.00
1 x MEC with some missing front and back plates-IF2 port may not work,
everything else does for sure-$50.00
Creamware A16U brand new 16 channel 24 bit (96k capable) AD/DA converter and
external power supply. Still in warranty - about 2 months old) Has 2 x ADAT
I/O and will work double wire as an 8 channel unit at higher sample rates.
Very nice and warm sounding ADDA conversion. Also will work with ZLink
connections on Pulsar cards-$600.00 OBO (I'm taking a $450.00 hit at this
price). Also has WC in out. This would be a waycool outboard converter for
Paris interfacing with a couple of ADAT modules.
2 x 15' SCSI cables for long cable runs from EDS cards to MECS-brand new and
worked perfectly with my rig-$2500.00 each
Brian T Paris DVD $15.00
13 slot Magma chassis-This is the newer Pro tools branded model with the
round SCSI cable instead of the flat one that is no longer being made. The
front on/off switch is stuck to the "on" position so to turn if on off
requires plugging/unplugging the unit from the back. Includes host cards and
cable. AS IS for $375.00. If I have to spend the time to fix it, I'll want
more $$$ for it. You DIY guys could easily order a switch from Magma and
have a rockin 13 slotter, or just use it as it is now.
Colorgraphics Xentera AGP 4 head video card-$125.00 comes with everything
you need and is brand new, still in warranty through Colorgraphics.Hi DJ,
I'm interested in the MEC for 50$ and the creamware A16U.
Could you send me your email?
Best regards,
Thomas
"DJ" <www.aarrrrggghhh!!!.com> wrote:
>2 x ADAT modules $200.00
>
>2 x Midiman Digipatch units-$200.00
>
>1 Sony MU-R201 - $200.00 (this is a cool piece and worth the $$ if you need
>and outboard stereo reverb/multiFX box) If this doesn't sell at this price
>it's going back in my rack.
>
>Bundle with MEC, SCSI cable C-16 and IF2 (bottom panel of MEC is held on
>with black gaffer's tape. It's very secure and not visible from front of
>unit. Has all front and back plates)-$125.00
>
>1 x MEC with some missing front and back plates-IF2 port may not work,
>everything else does for sure-$50.00
>
>Creamware A16U brand new 16 channel 24 bit (96k capable) AD/DA converter
and
>external power supply. Sti
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
