The PARIS Forums: PARIS: Main » super dumb Q: stereo FX

Home » The PARIS Forums » PARIS: Main » super dumb Q: stereo FX

Show: Today's Messages :: Polls :: Message Navigator

super dumb Q: stereo FX [message #56127]

Tue, 21 June 2005 10:42

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

t; but some have suggested I'd be better buying a decent 2 (or 4) channel
>
>>> unit,
>>> and using the desk for the rest. That way acoustic guitar could be
>>> recorded
>>> with 3 mics through decent pres. I'd only need to use the desk pres for
>
>>> extra
>>> drum mics beyond the 3 channels (each instrument tracked indi

Report message to a moderator

Re: super dumb Q: stereo FX [message #56128 is a reply to message #56127]

Thu, 21 July 2005 11:14

EK Sound

Messages: 939
Registered: June 2005

Senior Member

vidually).
>
>>> It'd
>>> only be worth investing the money in an 8 channel pre if they're going
>to
>>> be a fairly significantly better than those in the desk.
>>>
>>> Many thanks for any advice / suggestions.
>>>
>>> BTW, mic wise I'm using AT4033a's as O/Hs / Vocals / acoustic guitar,
>
>>> C418s
>>> on toms / snare top, SM57 (underneath snare), D112 kick. I *may* buy
a
>
>>> Rode
>>> NTK (valve) for vocals / acoustic guitar.
>>
>>
>I haven't run extensive tests with r8brain vs. CEP (Audition), but they seem
comparable - esp. triangular noise shaping in CEP. Those are my two go-to
SRCs.<

Report message to a moderator

Re: super dumb Q: stereo FX [message #56134 is a reply to message #56128]

Thu, 21 July 2005 16:40

Rod Lincoln
Messages: 883
Registered: September 2005

Senior Member

net" target="_blank">animix_spam-this-ahole_@animas.net> wrote:
> >I've got no problem working with Cubase. The DR 16 doesn't have a smpte
> card
> >though. I would think that the 9 pin port would be a receiver since it's
> for
> >a remote control. Icf it doesn't lock to Paris, I'll try it with Cubase
> and
> >one of my RME cards. Can't think of any other way to do it. The (127)
page
> >manual will be shipped with it so after an RTFM interlude, maybe I can
get
> >my head around this. It looks like a pretty cool recording device.
>
> Ahh.. the SMPTE card was an option on that, IIRC - the one I
> owned had one.
> As far as a recording device, it's pretty handy for certain
> things, but I didn't like the convertors, personally.
> Let me know if I can help - if you're hacing trouble, maybe
> send me a .jpg shot of the back panel & it could refresh my
> memory as to the connections, etc... does that particular unit
> have the BNC connections, do you know?
>
> NeilHi,
I don't aggree about the 386 and the 376 as a matter of fact from DBX.
With some upgrade they sound very very good, v

Report message to a moderator

Previous Topic:	what is the best way to do sample rate conversion.
Next Topic:	Motherboard/Processor

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 11 05:35:45 PST 2024

Total time taken to generate the page: 0.00935 seconds