|
|
|
|
|
|
|
|
|
|
| Re: HELP NEEDED No interface connected to master card [message #96059 is a reply to message #96057] |
Mon, 18 February 2008 06:22   |
![mike audet[3] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "mike audet[3] is currently offline")
mike audet[3]
Messages: 88
Registered: June 2008
|
Member |
|
|
Hi Dimitrios,
If you go to ensoniq.ca, there is a word document with installation instructions
and paris tips. In there is a description of how to get PARIS to run on
a dual cpu/hyperthreading setup under xp. The task assignment utility is
part of that.
As for your error message, could windows have, for some reason, re-enumerated
your cards? Do all of your cards have interfaces connected to them? If
you check the paris.cfg file in your paris pro folder, there is a line that
reads:
MasterOutputCard=0
You could try changing this to "3" if you have 4 cards, or "4" if you have
5 cards, etc.
let me know how it goes.
All the best!
Mike
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Could it be a symptopm of an eds card going dead ??
>Thanks
>Dimitrios
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>Thanks to both !
>>I will try all althoiugh I have resetted cables several times but who knows...
>>Whats task assignment manager that you run every time before running Paris
>>??
>>Thanks
>>Dimitrios
>>
>>"Mike Audet" <mike@..> wrote:
>>>
>>>I know this happens to me if I forget to run the task assignment manager
>>before
>>>launching PARIS. Could hyper threading or a dual core CPU been re-activated?
>>> This would cause the error.
>>>
>>>Let us know how the troubleshooting goes.
>>>
>>>Mike
>>>
>>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>>
>>>>Hi,
>>>>All of the sudden I cannot lunch Paris till the end.
>>>>It starts alright locks all my adat cards across 3 mec's (lights stop
>flashing
>>>>) and when all seem that Paris will go to vST/DX search as usual when
>starting
>>>>then all lights on mecs are flashing and I get this No interface connected
>>>>to master card reset your cables thing !
>>>>Any clew ??
>>>>Thanks
>>>>Dimitrios
>>>
>>
>
|
|
|
|
| Re: HELP NEEDED No interface connected to master card [message #96060 is a reply to message #96059] |
Mon, 18 February 2008 09:15 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Dear Mike,
Thank you for your tips !
I hve found the workaround !
As Tom said I have taken a look at the cables and I found that on all three
!! there was a pin that was bent close to the next pin almost touching before
attching to eds cards !
I made sure that all pins were far away in beetween them and all went smooth.
I don't know if I caused any malfunction though.
What is happening last few days is that ADAT card on Mec 3 passes signal
with pops and clicks as it doesn't have proper wordclocking , although clocked
for external mytek wordclock machine.
It was perfect but after a new installation on second PC with Pulsar cards
this doesn't seem to go away.
In case that I will not solve this I will have to drop the adat card from
that Mec and keep the other 4 cards (two on each other mecs) which work alright
except for channels 5 and 6 on two of these cards !
Maybe I will make a Me Paris install and see if this will fix that problem
before I uninstall the adat card.
Thanks !!!
Dimitrios
"Mike Audet" <mike@..> wrote:
>
>Hi Dimitrios,
>
>If you go to ensoniq.ca, there is a word document with installation instructions
>and paris tips. In there is a description of how to get PARIS to run on
>a dual cpu/hyperthreading setup under xp. The task assignment utility is
>part of that.
>
>As for your error message, could windows have, for some reason, re-enumerated
>your cards? Do all of your cards have interfaces connected to them? If
>you check the paris.cfg file in your paris pro folder, there is a line that
>reads:
>
>MasterOutputCard=0
>
>You could try changing this to "3" if you have 4 cards, or "4" if you have
>5 cards, etc.
>
>let me know how it goes.
>
>All the best!
>
>Mike
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>Could it be a symptopm of an eds card going dead ??
>>Thanks
>>Dimitrios
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>
>>>Thanks to both !
>>>I will try all althoiugh I have resetted cables several times but who
knows...
>>>Whats task assignment manager that you run every time before running Paris
>>>??
>>>Thanks
>>>Dimitrios
>>>
>>>"Mike Audet" <mike@..> wrote:
>>>>
>>>>I know this happens to me if I forget to run the task assignment manager
>>>before
>>>>launching PARIS. Could hyper threading or a dual core CPU been re-activated?
>>>> This would cause the error.
>>>>
>>>>Let us know how the troubleshooting goes.
>>>>
>>>>Mike
>>>>
>>>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>>>
>>>>>Hi,
>>>>>All of the sudden I cannot lunch Paris till the end.
>>>>>It starts alright locks all my adat cards across 3 mec's (lights stop
>>flashing
>>>>>) and when all seem that Paris will go to vST/DX search as usual when
>>starting
>>>>>then all lights on mecs are flashing and I get this No interface connected
>>>>>to master card reset your cables thing !
>>>>>Any clew ??
>>>>>Thanks
>>>>>Dimitrios
>>>>
>>>
>>
>
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
