The PARIS Forums: PARIS: Main » Wormhole for Dummies

Home » The PARIS Forums » PARIS: Main » Wormhole for Dummies

Show: Today's Messages :: Polls :: Message Navigator

Wormhole for Dummies [message #74554]

Fri, 20 October 2006 22:46

Messages: 327
Registered: September 2005

Senior Member

Can anyone give me a quick walk through of what settings I need on each machine for wormhole?

I've got Wormhole in DP5 set on "start" under direct, and named the channel. In paris I selected "end" and then the "channel name - end" from the drop down.

Is there anything else I need to do paris wise with this to get it to work?

I'm just getting the "host is not feeding audio to Wormhole2" message at the bottom in Paris on the insert.

I'll look at the plasq manual again, but I just thought if someone has a quick answer as to what I'm doing wrong here..

Cheers,

TC

Report message to a moderator

Re: Wormhole for Dummies [message #74555 is a reply to message #74554]

Fri, 20 October 2006 23:46

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Hi,
One dum question too.
Have you connected the two computers via ethernet and does this work ok ?
ALSO VITAL did you put an empty 24 bit audio file on the track you wanna
accept wormholed audio ??
This might be the missing point right ?

Secondly use FXpansion 3.3 to wrap wormhole in Paris.
If it does not work something with your ethernet connection beetween computers
might be wrong.
Wormhole works, tested...
Regards,
Dimitrios

TC <tc@spammetodeathyoubastards.org> wrote:
>
>Can anyone give me a quick walk through of what settings I need on each
machine for
>wormhole?
>
>I've got Wormhole in DP5 set on "start" under direct, and named the channel.
In paris
>I selected "end" and then the "channel name - end" from the drop down.
>
>Is there anything else I need to do paris wise with this to get it to work?
>
>I'm just getting the "host is not feeding audio to Wormhole2" message at
the bottom
>in Paris on the insert.
>
>I'll look at the plasq manual again, but I just thought if someone has a
quick answer
>as to what I'm doing wrong here..
>
>Cheers,
>
>TC

Report message to a moderator

Re: Wormhole for Dummies [message #74560 is a reply to message #74555]

Sat, 21 October 2006 05:29

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

I have the exact same problem trying to go between Cubasesx2 and
Paris on the same computer.
Everything looks good in Cubase and it is sending to 127.0.0.
but in Paris it says host not sending.
Also it does the same thing in Waveleb4 when trying to receive.
Dimitrios...so you are saying there has to be a dummy silent
audio track on the receiving track channel in Paris?
I read something to that effect on the plasq forum.
Some apps mute the plugin signal if there is no audio track
present or something....I guess Paris is one of those apps???

I want to track into PARIS and send to Cubase for effects and
grouping and send back to Paris in stereo submixes.
You dont think this is possible on 1 comp?
And have itsample accurate?

thx
b

"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>One dum question too.
>Have you connected the two computers via ethernet and does this work ok
?
>ALSO VITAL did you put an empty 24 bit audio file on the track you wanna
>accept wormholed audio ??
>This might be the missing point right ?
>
>Secondly use FXpansion 3.3 to wrap wormhole in Paris.
>If it does not work something with your ethernet connection beetween computers
>might be wrong.
>Wormhole works, tested...
>Regards,
>Dimitrios
>
>TC <tc@spammetodeathyoubastards.org> wrote:
>>
>>Can anyone give me a quick walk through of what settings I need on each
>machine for
>>wormhole?
>>
>>I've got Wormhole in DP5 set on "start" under direct, and named the channel.
> In paris
>>I selected "end" and then the "channel name - end" from the drop down.
>>
>>Is there anything else I need to do paris wise with this to get it to work?
>>
>>I'm just getting the "host is not feeding audio to Wormhole2" message at
>the bottom
>>in Paris on the insert.
>>
>>I'll look at the plasq manual again, but I just thought if someone has
a
>quick answer
>>as to what I'm doing wrong here..
>>
>>Cheers,
>>
>>TC
>

Report message to a moderator

Re: Wormhole for Dummies [message #74570 is a reply to message #74555]

Sat, 21 October 2006 09:49

Messages: 327
Registered: September 2005

Senior Member

Hi Dimitrios,

I tried the dummy track, but still no luck.

I have the mac sending to the ip address, and the channel name shows up in the paris instance, so I am assuming that the two systems are seeing each other here.

I just set the Digital Performer channel to "start" and paris to "end" for each instance?

Do I need sync checked? What about buffer settings and the "play through" option?

Thanks a lot for you help!

TC

Dimitrios wrote:
> Hi,
> One dum question too.
> Have you connected the two computers via ethernet and does this work ok ?
> ALSO VITAL did you put an empty 24 bit audio file on the track you wanna
> accept wormholed audio ??
> This might be the missing point right ?
>
> Secondly use FXpansion 3.3 to wrap wormhole in Paris.
> If it does not work something with your ethernet connection beetween computers
> might be wrong.
> Wormhole works, tested...
> Regards,
> Dimitrios
>
> TC <tc@spammetodeathyoubastards.org> wrote:
>> Can anyone give me a quick walk through of what settings I need on each
> machine for
>> wormhole?
>>
>> I've got Wormhole in DP5 set on "start" under direct, and named the channel.
> In paris
>> I selected "end" and then the "channel name - end" from the drop down.
>>
>> Is there anything else I need to do paris wise with this to get it to work?
>>
>> I'm just getting the "host is not feeding audio to Wormhole2" message at
> the bottom
>> in Paris on the insert.
>>
>> I'll look at the plasq manual again, but I just thought if someone has a
> quick answer
>> as to what I'm doing wrong here..
>>
>> Cheers,
>>
>> TC
>

Report message to a moderator

Re: Wormhole for Dummies [message #74571 is a reply to message #74570]

Sat, 21 October 2006 09:54

Messages: 327
Registered: September 2005

Senior Member

I also noticed that in Paris if I select "end" under direct, then try and select "test - end" (my wh channel name) from the chooser, it doesn't seem to take (the name doesn't appear where it says "enter channel name or use chooser").

If I click "start" though, "test" appears in the channel name.

I guess I need to look at the manual again.. RTFM once again..

Cheers,

TC

TC wrote:
> Hi Dimitrios,
>
> I tried the dummy track, but still no luck.
>
> I have the mac sending to the ip address, and the channel name shows up
> in the paris instance, so I am assuming that the two systems are seeing
> each other here.
>
> I just set the Digital Performer channel to "start" and paris to "end"
> for each instance?
>
> Do I need sync checked? What about buffer settings and the "play
> through" option?
>
> Thanks a lot for you help!
>
> TC
>

Report message to a moderator

Re: Wormhole for Dummies [message #74601 is a reply to message #74571]

Sat, 21 October 2006 18:24

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

Dimitrios,
Can you send me a copy of the dummy track you use?
lwire98@yahoo.comSPAM.

Also, does the receiving PARIS channel need to be record enabled?
Does PARIS need to be playing?

Thx,
b

TC <tc@spammetodeathyoubastards.org> wrote:
>I also noticed that in Paris if I select "end" under direct, then try and
select "test
>- end" (my wh channel name) from the chooser, it doesn't seem to take (the
name doesn't
>appear where it says "enter channel name or use chooser").
>
>If I click "start" though, "test" appears in the channel name.
>
>I guess I need to look at the manual again.. RTFM once again..
>
>Cheers,
>
>TC
>
>
>TC wrote:
>> Hi Dimitrios,
>>
>> I tried the dummy track, but still no luck.
>>
>> I have the mac sending to the ip address, and the channel name shows up

>> in the paris instance, so I am assuming that the two systems are seeing

>> each other here.
>>
>> I just set the Digital Performer channel to "start" and paris to "end"

>> for each instance?
>>
>> Do I need sync checked? What about buffer settings and the "play
>> through" option?
>>
>> Thanks a lot for you help!
>>
>> TC
>>

Report message to a moderator

Previous Topic:	Fader question.
Next Topic:	MagicStomp review

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Dec 27 22:16:46 PST 2024

Total time taken to generate the page: 0.01840 seconds