The PARIS Forums: PARIS: Main » ASIO DRIVER current status ?

Home » The PARIS Forums » PARIS: Main » ASIO DRIVER current status ?

Show: Today's Messages :: Polls :: Message Navigator

Re: ASIO DRIVER current status ? [message #110222 is a reply to message #110217]

Sat, 14 October 2023 05:18

mikeaudet

Messages: 476
Registered: February 2009
Location: Canada

Senior Member

Hi Dan,

The PC should definitely not be freezing when loading PARIS 2.1. The version of the driver that I posted a screen shot of earlier is the first version of the ASIO driver. It supported a 64 bit Windows, but only a 32 bit ASIO host. There was a lot of work to do porting the user mode part of the PARIS driver to 64 bits. The second version came out in 2019 (I believe), and supports both 32 bit and 64 bot ASIO hosts, as well as a 32 sample buffer size. The change to allow 32 sample buffers required altering the firmware that runs on the EDS cards.

The order of install matters for the ASIO driver. The ASIO installer must be run after the non-ASIO driver installer, as it updates components. If the older installer that includes the PARIS software is run after the ASIO driver is installed, it can replace files and create a mis-match between the kernel and user mode drivers.

Let me know if you'd like me to take a look over TeamViewer. The machine definitely should not be freezing.

I hope this helps.
Mike

Report message to a moderator

Re: ASIO DRIVER current status ? [message #110223 is a reply to message #110222]

Sun, 15 October 2023 08:59

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

Hi Mike,

i have bought the new Driver from your webside, i am glad to donate you in that way.
I have some issue, that i can't solve by myself now.
My Asio Host Cubase 12 freeze after choosing the Paris asio driver and the Paris Software too.

I have selected, Cubase 12 runs as Administrator.
What could it be, that booth freeze after starting the MEC ?

The MEC is loaded with 1x Input Card, 1X Output Card an 2x Adat.
These days is no CS16 used.

The Device Manager shows, all is raedy and alright.

If you know nothing about that, is it possible to show with team Viewer into my system ?

Best regards !
Daniel

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

Report message to a moderator

Re: ASIO DRIVER current status ? [message #110224 is a reply to message #110223]

Sun, 15 October 2023 09:13

mikeaudet

Messages: 476
Registered: February 2009
Location: Canada

Senior Member

Hi Dan,

How is the EDS card connected to the computer?

All the best,
Mike

Report message to a moderator

Re: ASIO DRIVER current status ? [message #110225 is a reply to message #110224]

Sun, 15 October 2023 12:41

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

Hi Mike,

I am using the pci expansions Slots of the Motherboard. I am using the old Asus Z97 C ..with 32GB Ram

Best regards
Daniel

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Sun, 15 October 2023 12:42]

Report message to a moderator

Re: ASIO DRIVER current status ? [message #110226 is a reply to message #107792]

Sun, 15 October 2023 13:08

mikeaudet

Messages: 476
Registered: February 2009
Location: Canada

Senior Member

Hi Dan,

That should be completely fine. Is the PC blue screening or locking up?

If it's locking up, I'd try re-seating the card. It might also be helpful to start PARIS without the MEC connected just to see if it starts up. This would eliminate a bad SCSI cable from being the cause.

If you are getting a blue screen, let's got together on TeamViewer so that I can check out the crash dump.

All the best,
Mike

Report message to a moderator

Re: ASIO DRIVER current status ? [message #110227 is a reply to message #110226]

Mon, 16 October 2023 12:06

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

Hi Mike,

i believe its time to meet via Teamviewer.
I had start Paris software an Cubase 12, both times it is freezing,when the MEC is off. The Courser of mouse don't moves.
The computer have to be restart by using the reset button.

Do you mean, reninstall the Win OS should be help ?

Best regards
Dan

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

Report message to a moderator

Re: ASIO DRIVER current status ? [message #110228 is a reply to message #110227]

Mon, 16 October 2023 18:39

mikeaudet

Messages: 476
Registered: February 2009
Location: Canada

Senior Member

Hi Dan,

Unfortunately, freezing almost always indicates a hardware error. Generally, if I make a mistake in the driver code, the blue screen of death results. The only exception to this that I've ever seen is in power management code (when the PC is waking up), which isn't in the version of the driver you have. I'd remove the PCI card from the slot and put it back it. If you have another PCI slot, it might make sense to try the other slot.

The PARIS app will open if only one card is in the system and there is no interface attached. If you have another card, I'd try just the one card with no interface, and see if PARIS.exe starts up. make sure PARIS.exe is running as administrator. If it isn't running as administrator, PARIS.exe will crash, but I have not seen it make the PC freeze.

I've attached an image of the damage to the female SCSI connector on an EDS 1000 card from a 50 pin cable with a bent pin. Take a look at your card and MEC connectors to see if anything looks like this. The power for the 442 flows on one of the edge pins, and if the pin gets bent, it can apply power to signal pins on one of the chips on the card or the MEC and damage it.

I installed the second version of the ASIO on my test PC under Windows 10, applied all Windows 10 updates, and it worked fine.

I'm happy to take a look on TeamViewer tomorrow after work (after 6:00pm Eastern Daylight Time).

I hope this helps,

Mike

Attachment: bent pin damage.jpg
(Size: 228.68KB, Downloaded 12192 times)

Report message to a moderator

Re: ASIO DRIVER current status ? [message #110229 is a reply to message #110228]

Tue, 17 October 2023 03:57

danielcornelius

Messages: 171
Registered: May 2012

Senior Member

Hi Mike,

i try another card first and if that does not work, i have to install team viewer !

Best regards
Dan

----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

Report message to a moderator

Re: ASIO DRIVER current status ? [message #110242 is a reply to message #107792]

Tue, 31 October 2023 20:41

Will The Weirdo

Messages: 190
Registered: December 2009
Location: On The Lake

Senior Member

I've been buying up older PARIS hardware and I've found several non used older EDS1000 cards had issues until I cleaned the pin contacts. After a little eraser work the EDS1000 cards worked without errors. I also found plugging and unplugging cables a few times helped fix hardware errirs too. The hardware was built to a high standard but it seems most of the metal contact parts need cleaning every few years.

Report message to a moderator

Pages (6): [ « ‹ 1 2 3 4 5 6]

Previous Topic:	Update....
Next Topic:	How to properly route audio to the 8 out cards?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Oct 31 13:26:32 PDT 2024

Total time taken to generate the page: 0.07197 seconds