The PARIS Forums: PARIS: Main

Home » The PARIS Forums » PARIS: Main » Cable tester

Show: Today's Messages :: Polls :: Message Navigator

Cable tester [message #100964]

Wed, 05 November 2008 21:21

Wayne

Messages: 206
Registered: July 2008
Location: Las Vegas

Senior Member

Hi all,

I've used an analog multi-meter for years to ohm speaker and audio cables.
I recently ran into a situation where I might need more.

At several gigs I noticed my sound fading and cutting out completely at
times. I thought it was the amp but it turns out it was a guitar cable from
the POD to the amp. This cable is never jerked around or even moved during
performance. The cable ohm'd out OK. I replaced the cable and everything
works well. Can a cable ohm out OK and yet breakdown under use? I'm
talking guitar cables or audio line cables.

Secondly, I thinking of purchasing the Behringer CT-100 cable tester ($30 at
zzSounds, $40 at a local GC). The spec states it can detect intermittent
problems. I've researched the Nady, ART and two others (I forget the names)
and they all seem to do the same thing but at a higher price point. Any
recommendations from users or studio engineers?

Thanks,
Wayne

Report message to a moderator

Re: Cable tester [message #100965 is a reply to message #100964]

Wed, 05 November 2008 21:43

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

"Wayne Carson" <waynecarson@cox.net> wrote in message news:491282ea@linux...
> Hi all,
>
> I've used an analog multi-meter for years to ohm speaker and audio cables.
> I recently ran into a situation where I might need more.
>
> At several gigs I noticed my sound fading and cutting out completely at
> times. I thought it was the amp but it turns out it was a guitar cable
> from the POD to the amp. This cable is never jerked around or even moved
> during performance. The cable ohm'd out OK. I replaced the cable and
> everything works well. Can a cable ohm out OK and yet breakdown under
> use? I'm talking guitar cables or audio line cables.
>

Never seen it, and have doubts that there is enough current to do so. I'd
say more likely

> Secondly, I thinking of purchasing the Behringer CT-100 cable tester ($30
> at zzSounds, $40 at a local GC). The spec states it can detect
> intermittent problems. I've researched the Nady, ART and two others (I
> forget the names) and they all seem to do the same thing but at a higher
> price point. Any recommendations from users or studio engineers?

I have one at work. Best $30 I've spent in quite a few years.

>
> Thanks,
> Wayne

Report message to a moderator

Re: Cable tester [message #100968 is a reply to message #100965]

Thu, 06 November 2008 09:16

Wayne

Messages: 206
Registered: July 2008
Location: Las Vegas

Senior Member

Thanks Aaron.

"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:49128823@linux...
>
> "Wayne Carson" <waynecarson@cox.net> wrote in message
> news:491282ea@linux...
>> Hi all,
>>
>> I've used an analog multi-meter for years to ohm speaker and audio
>> cables. I recently ran into a situation where I might need more.
>>
>> At several gigs I noticed my sound fading and cutting out completely at
>> times. I thought it was the amp but it turns out it was a guitar cable
>> from the POD to the amp. This cable is never jerked around or even moved
>> during performance. The cable ohm'd out OK. I replaced the cable and
>> everything works well. Can a cable ohm out OK and yet breakdown under
>> use? I'm talking guitar cables or audio line cables.
>>
>
> Never seen it, and have doubts that there is enough current to do so. I'd
> say more likely
>
>> Secondly, I thinking of purchasing the Behringer CT-100 cable tester ($30
>> at zzSounds, $40 at a local GC). The spec states it can detect
>> intermittent problems. I've researched the Nady, ART and two others (I
>> forget the names) and they all seem to do the same thing but at a higher
>> price point. Any recommendations from users or studio engineers?
>
> I have one at work. Best $30 I've spent in quite a few years.
>
>>
>> Thanks,
>> Wayne
>
>
>

Report message to a moderator

Previous Topic:	Studio Pics 1
Next Topic:	missing EDS card in Device Manager plus freezing issues question

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Feb 08 20:00:41 PST 2025

Total time taken to generate the page: 0.09525 seconds