The PARIS Forums: PARIS: Main » Tracking/Overdubs and Latency

Home » The PARIS Forums » PARIS: Main » Tracking/Overdubs and Latency

Show: Today's Messages :: Polls :: Message Navigator

Tracking/Overdubs and Latency [message #64184]

Sun, 05 February 2006 08:36

Dave Geoghegan
Messages: 8
Registered: June 2005

Junior Member

Hi,
When I'm tracking a band , I send them back the live output from my mixer
( not the Paris output ) since I assume there is some latency in the Paris
system.

However , when I'm overdubbing I have no choice but to mix a paris out
stream ( the previously recorded tracks ) and the live mixer. I'm doing drums
a lot , so the latency issue is important to the performance. I do notice
if I leave both feeds is I can hear a "phasing" a little bit.

Questions:
1) Has anybody ( or how could I?) measure the latency of Paris in this
situation?

2) What's the right model for headphone sends here , all paris or paris
and mixer output?

3) Should I be moving the overdub tracks slightly in time to adjust
for the latency in 1) or am I making a mountain out of a molehill here?

Paris On ;)

dave

Report message to a moderator

Re: Tracking/Overdubs and Latency [message #64187 is a reply to message #64184]

Sun, 05 February 2006 10:05

cujo
Messages: 285
Registered: July 2005

Senior Member

I use Pars only as the monitor, I never ecall anyone haveing trouble with
latency in perfomance. I defintely felt this was a problem when I used a
very old version of PT on and old mac. But don't find an issue at all in
Paris. Maybe just send only the Paris mix and not the board mix too, I just
use a little furman headphone amp which is sent signal from the MEC sends

"Dave Geoghegan" <daveg@knowledgextensions.com> wrote:
>
>Hi,
> When I'm tracking a band , I send them back the live output from my mixer
>( not the Paris output ) since I assume there is some latency in the Paris
>system.
>
> However , when I'm overdubbing I have no choice but to mix a paris out
>stream ( the previously recorded tracks ) and the live mixer. I'm doing
drums
>a lot , so the latency issue is important to the performance. I do notice
>if I leave both feeds is I can hear a "phasing" a little bit.
>
> Questions:
> 1) Has anybody ( or how could I?) measure the latency of Paris in this
>situation?
>
> 2) What's the right model for headphone sends here , all paris or paris
>and mixer output?
>
> 3) Should I be moving the overdub tracks slightly in time to adjust
>for the latency in 1) or am I making a mountain out of a molehill here?
>
> Paris On ;)
>
>dave
>
>
>
>

Report message to a moderator

Re: Tracking/Overdubs and Latency [message #64209 is a reply to message #64187]

Sun, 05 February 2006 18:08

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

Paris latencies:

Round trip via insert (EDS "External") through SPDIF I/O = 1 Sample

Round trip via insert (EDS "External") through MEC 24 bit
analog Out to analog In = 60 Samples = 1.36ms/44.1KHz or 1.25ms/48K

Total record and monitor path (Channel In/Stereo Master Out) MEC 24 bit
analog In to analog Out = 66 Samples = 1.5ms/44.1Khz or 1.375ms/48KHz

EDS compressor with no lookahead = 2 Samples

EDS EQ = 0 Samples

You shouldn't have any problems with audible latency at 1.5ms or 1.375ms

Deej

"Cujo" <chris@nospamapplemanstudio.com> wrote in message
news:43e63060$1@linux...
>
>
> I use Pars only as the monitor, I never ecall anyone haveing trouble with
> latency in perfomance. I defintely felt this was a problem when I used a
> very old version of PT on and old mac. But don't find an issue at all in
> Paris. Maybe just send only the Paris mix and not the board mix too, I
just
> use a little furman headphone amp which is sent signal from the MEC sends
>
>
> "Dave Geoghegan" <daveg@knowledgextensions.com> wrote:
> >
> >Hi,
> > When I'm tracking a band , I send them back the live output from my
mixer
> >( not the Paris output ) since I assume there is some latency in the
Paris
> >system.
> >
> > However , when I'm overdubbing I have no choice but to mix a paris out
> >stream ( the previously recorded tracks ) and the live mixer. I'm doing
> drums
> >a lot , so the latency issue is important to the performance. I do notice
> >if I leave both feeds is I can hear a "phasing" a little bit.
> >
> > Questions:
> > 1) Has anybody ( or how could I?) measure the latency of Paris in
this
> >situation?
> >
> > 2) What's the right model for headphone sends here , all paris or
paris
> >and mixer output?
> >
> > 3) Should I be moving the overdub tracks slightly in time to adjust
> >for the latency in 1) or am I making a mountain out of a molehill here?
> >
> > Paris On ;)
> >
> >dave
> >
> >
> >
> >

Report message to a moderator

Previous Topic:	Plugins
Next Topic:	PCI latency......a whole 'nuther can of worms

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 19 10:39:54 PST 2024

Total time taken to generate the page: 0.01372 seconds