| So, why wouldn't this work? [message #71000] |
Wed, 09 August 2006 09:33  |
|
|
I just routed the digital output of my PCM91 thru the digi in of the MEC master
module - Master digi outs to the Mixer-A Insert module (being careful to
"complete the circuit" by routing the insert outs to the mixer ins) and PRESTO!!!
I have my PCM91 returns on channels 15 and 16 of my mixer w/ EQ!
So then I tried this: EDS plate reverbs on Aux 2 and 3 to "external" - routed
from Mixer-A FX module outs to Mixer-A Insert module ins, being careful to
complete the circuit, to have the EDS plates come up on channels 15 and 16
so as to EQ them (my biggest complaint about the EDS plates - no EQ!)...
but it don't work!
Any ideas why not?
Thanks!
gantt
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
|
|
| Re: So, why wouldn't this work? [message #71002 is a reply to message #71001] |
Wed, 09 August 2006 10:06  |
|
|
Hmmm. That's way too simple for a complicated guy like me.
Good Idea.
Thanks,
gantt
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>It might be a bis simpler to instantiate the Paris FreQ to the aux slot
>after the plate reverb.
>
>Just a thought
>
>;o)
>
>"Gantt Kushner" <ganttmann@comcast.net> wrote in message
>news:44da0e5a$1@linux...
>>
>> I just routed the digital output of my PCM91 thru the digi in of the MEC
>master
>> module - Master digi outs to the Mixer-A Insert module (being careful
to
>> "complete the circuit" by routing the insert outs to the mixer ins) and
>PRESTO!!!
>> I have my PCM91 returns on channels 15 and 16 of my mixer w/ EQ!
>>
>> So then I tried this: EDS plate reverbs on Aux 2 and 3 to "external"
-
>routed
>> from Mixer-A FX module outs to Mixer-A Insert module ins, being careful
to
>> complete the circuit, to have the EDS plates come up on channels 15 and
16
>> so as to EQ them (my biggest complaint about the EDS plates - no EQ!)...
>> but it don't work!
>>
>> Any ideas why not?
>>
>> Thanks!
>>
>> gantt
>
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
|
|
| Re: So, why wouldn't this work? [message #71008 is a reply to message #71003] |
Wed, 09 August 2006 14:19 |
|
|
Actually, I'm thinking about getting a PCI-424 MOTU interface for my old G4
and trying to use Digital Performer to access things like the Waves IR-L
reverb and the newer UAD-1 plugs, like the Neve EQ, which I can't use w/
Paris!!!
The good news and the bad news is that right now I'm so busy between working
and taking care of my kids (since my wife went back to work full time) that
I barely have time to set up for sessions, let alone experiment w/ new computer
configurations!
Question - Do you hear any degradation of signal for going thru the 20 bit
only ADAT I/O on ther MEC?
Gantt
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Hehehe.........well, I can tell you how do do this by using Cubase SX as
a
>workaround if you need a challenge.
>
>;o)
>
>"Gantt Kushner" <ganttmann@comcast.net> wrote in message
>news:44da161a$1@linux...
>>
>> Hmmm. That's way too simple for a complicated guy like me.
>>
>> Good Idea.
>>
>> Thanks,
>>
>> gantt
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>> >It might be a bis simpler to instantiate the Paris FreQ to the aux slot
>> >after the plate reverb.
>> >
>> >Just a thought
>> >
>> >;o)
>> >
>> >"Gantt Kushner" <ganttmann@comcast.net> wrote in message
>> >news:44da0e5a$1@linux...
>> >>
>> >> I just routed the digital output of my PCM91 thru the digi in of the
>MEC
>> >master
>> >> module - Master digi outs to the Mixer-A Insert module (being careful
>> to
>> >> "complete the circuit" by routing the insert outs to the mixer ins)
and
>> >PRESTO!!!
>> >> I have my PCM91 returns on channels 15 and 16 of my mixer w/ EQ!
>> >>
>> >> So then I tried this: EDS plate reverbs on Aux 2 and 3 to "external"
>> -
>> >routed
>> >> from Mixer-A FX module outs to Mixer-A Insert module ins, being careful
>> to
>> >> complete the circuit, to have the EDS plates come up on channels 15
and
>> 16
>> >> so as to EQ them (my biggest complaint about the EDS plates - no
>EQ!)...
>> >> but it don't work!
>> >>
>> >> Any ideas why not?
>> >>
>> >> Thanks!
>> >>
>> >> gantt
>> >
>> >
>>
>
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
| Re: So, why wouldn't this work? [message #71013 is a reply to message #71008] |
Wed, 09 August 2006 16:59 |
excelav
Messages: 2130
Registered: July 2005
Location: Metro Detroit
|
Senior Member |
|
|
Hey Gantt!
If your thinking about a Adat light pipe interface, you might want to consider
these options.
M-Audio ProFire Lightbridge
http://www.m-audio.com/products/en_us/ProFireLightbridge-mai n.html
Focusrite SAFFIRE PRO 26 I/O
http://www.focusrite.com/index.php?pageName=productOverview& amp;productName=saffire_pro_26_i_o
Alesis IO/26
http://alesis.com/product.php?id=96
James
"Gantt Kushner" <ganttmann@comcast.net> wrote:
>
>Actually, I'm thinking about getting a PCI-424 MOTU interface for my old
G4
>and trying to use Digital Performer to access things like the Waves IR-L
>reverb and the newer UAD-1 plugs, like the Neve EQ, which I can't use w/
>Paris!!!
>
>The good news and the bad news is that right now I'm so busy between working
>and taking care of my kids (since my wife went back to work full time) that
>I barely have time to set up for sessions, let alone experiment w/ new computer
>configurations!
>
>Question - Do you hear any degradation of signal for going thru the 20 bit
>only ADAT I/O on ther MEC?
>
>Gantt
>
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>>Hehehe.........well, I can tell you how do do this by using Cubase SX as
>a
>>workaround if you need a challenge.
>>
>>;o)
>>
>>"Gantt Kushner" <ganttmann@comcast.net> wrote in message
>>news:44da161a$1@linux...
>>>
>>> Hmmm. That's way too simple for a complicated guy like me.
>>>
>>> Good Idea.
>>>
>>> Thanks,
>>>
>>> gantt
>>>
>>> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>>> >It might be a bis simpler to instantiate the Paris FreQ to the aux slot
>>> >after the plate reverb.
>>> >
>>> >Just a thought
>>> >
>>> >;o)
>>> >
>>> >"Gantt Kushner" <ganttmann@comcast.net> wrote in message
>>> >news:44da0e5a$1@linux...
>>> >>
>>> >> I just routed the digital output of my PCM91 thru the digi in of the
>>MEC
>>> >master
>>> >> module - Master digi outs to the Mixer-A Insert module (being careful
>>> to
>>> >> "complete the circuit" by routing the insert outs to the mixer ins)
>and
>>> >PRESTO!!!
>>> >> I have my PCM91 returns on channels 15 and 16 of my mixer w/ EQ!
>>> >>
>>> >> So then I tried this: EDS plate reverbs on Aux 2 and 3 to "external"
>>> -
>>> >routed
>>> >> from Mixer-A FX module outs to Mixer-A Insert module ins, being careful
>>> to
>>> >> complete the circuit, to have the EDS plates come up on channels 15
>and
>>> 16
>>> >> so as to EQ them (my biggest complaint about the EDS plates - no
>>EQ!)...
>>> >> but it don't work!
>>> >>
>>> >> Any ideas why not?
>>> >>
>>> >> Thanks!
>>> >>
>>> >> gantt
>>> >
>>> >
>>>
>>
>>
>
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
