The PARIS Forums: PARIS: Main » Interfacing a Lexi LXP-1 to a balanced PB

Home » The PARIS Forums » PARIS: Main » Interfacing a Lexi LXP-1 to a balanced PB

Show: Today's Messages :: Polls :: Message Navigator

Interfacing a Lexi LXP-1 to a balanced PB [message #66895]

Sun, 16 April 2006 10:02

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

I sent my LXP-1 to Audio Upgrades last week and Jim Williams is doing the
480L mod right now. There is some question as to whether I will need to
ground the shield of the 1/4" plug that is connected to the LXP-1 when
running the cable to a 1/4" balanced PB to be interfaced with Paris
input/output modules.

I didn't notice any drop in level when interfacing this way using TRS plugs
before I shipped it and Jim hasn't reported any fried opamps, but I'm just
curious (and I prefer my componentry raw, not fried ;o). Any of you guys
have any technical skinny on the A8iT/A8oT and Paris 20 bit I/O that would
indicate any reason for concern about this?

TIA,

Deej

Report message to a moderator

Re: Interfacing a Lexi LXP-1 to a balanced PB [message #66903 is a reply to message #66895]

Sun, 16 April 2006 11:48

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

Do tell more about this 480L upgrade man

AA

"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:44427c3b@linux...
>I sent my LXP-1 to Audio Upgrades last week and Jim Williams is doing the
> 480L mod right now. There is some question as to whether I will need to
> ground the shield of the 1/4" plug that is connected to the LXP-1 when
> running the cable to a 1/4" balanced PB to be interfaced with Paris
> input/output modules.
>
> I didn't notice any drop in level when interfacing this way using TRS
> plugs
> before I shipped it and Jim hasn't reported any fried opamps, but I'm just
> curious (and I prefer my componentry raw, not fried ;o). Any of you guys
> have any technical skinny on the A8iT/A8oT and Paris 20 bit I/O that would
> indicate any reason for concern about this?
>
> TIA,
>
> Deej
>
>

I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html

Report message to a moderator

Re: Interfacing a Lexi LXP-1 to a balanced PB [message #66939 is a reply to message #66903]

Sun, 16 April 2006 18:58

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

He does a lot of stuff as far as upgrading componentry.
Google Jim Williams Audio Upgrades and give him a call. He's a gearhead so
he usually answers his phone at times when normal people wouldn't.

;o)

"Aaron Allen" <nospam@not_here.dude> wrote in message news:444290c5@linux...
> Do tell more about this 480L upgrade man
>
> AA
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:44427c3b@linux...
> >I sent my LXP-1 to Audio Upgrades last week and Jim Williams is doing
the
> > 480L mod right now. There is some question as to whether I will need to
> > ground the shield of the 1/4" plug that is connected to the LXP-1 when
> > running the cable to a 1/4" balanced PB to be interfaced with Paris
> > input/output modules.
> >
> > I didn't notice any drop in level when interfacing this way using TRS
> > plugs
> > before I shipped it and Jim hasn't reported any fried opamps, but I'm
just
> > curious (and I prefer my componentry raw, not fried ;o). Any of you guys
> > have any technical skinny on the A8iT/A8oT and Paris 20 bit I/O that
would
> > indicate any reason for concern about this?
> >
> > TIA,
> >
> > Deej
> >
> >
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html
>
>

Report message to a moderator

Re: Interfacing a Lexi LXP-1 to a balanced PB [message #66946 is a reply to message #66939]

Mon, 17 April 2006 01:49

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Hi,
The Jim Williams LXP-1 upgrade is a DA upgrade with a low noise version a
comparator upgrade some caps upgrade and +4 input instead of -10.
What you get is a better tail on your reverbs lower noise but algorithms
remain the same.
You won't get any 480L reverb from that.
I have don that also alone to my other LXP-5.
Well they sound better but nothing exteremely special.
Its all about algorithms.
Jim does a great job and he is a nice guy too.
If you wanna do an upgrade that is worth it try to get a LXP-15 with version
2 and the do the Jim Williams upgrade.

Regards,
Dimitrios

1"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>He does a lot of stuff as far as upgrading componentry.
>Google Jim Williams Audio Upgrades and give him a call. He's a gearhead
so
>he usually answers his phone at times when normal people wouldn't.
>
>;o)
>
>"Aaron Allen" <nospam@not_here.dude> wrote in message news:444290c5@linux...
>> Do tell more about this 480L upgrade man
>>
>> AA
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:44427c3b@linux...
>> >I sent my LXP-1 to Audio Upgrades last week and Jim Williams is doing
>the
>> > 480L mod right now. There is some question as to whether I will need
to
>> > ground the shield of the 1/4" plug that is connected to the LXP-1 when
>> > running the cable to a 1/4" balanced PB to be interfaced with Paris
>> > input/output modules.
>> >
>> > I didn't notice any drop in level when interfacing this way using TRS
>> > plugs
>> > before I shipped it and Jim hasn't reported any fried opamps, but I'm
>just
>> > curious (and I prefer my componentry raw, not fried ;o). Any of you
guys
>> > have any technical skinny on the A8iT/A8oT and Paris 20 bit I/O that
>would
>> > indicate any reason for concern about this?
>> >
>> > TIA,
>> >
>> > Deej
>> >
>> >
>>
>>
>> I choose Polesoft Lockspam to fight spam, and you?
>> http://www.polesoft.com/refer.html
>>
>>
>
>

Report message to a moderator

Previous Topic:	Any good Electronic Drum setups?
Next Topic:	A_NEW_WAY_of_working_with_PARIS)_UAD1+VST/DX !!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Mar 29 08:15:56 PDT 2025

Total time taken to generate the page: 0.02497 seconds