Home » The PARIS Forums » PARIS: Main » This_is_my_best_discover_lately!!_UAD1_users_and_not_only
| This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66954] |
Mon, 17 April 2006 04:15  |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Hello,
Today must be my day and yours by the way...
The chainer still amazes me !!
See what I found !!!
You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?) and you would
like to put say 3-4 UAD1 plugins on one audio track like say a vox, maybe
a 1176LN and then a cambridge eq and a dreamverb for the vox only and then
maybe a limiter plug all UAD1 plugz, that would normally in your situation
using FXpansion give you 4 time 16384 sample latency means 65536 sample latency
or in ms 1486.08 which means around 1.5 sec latency, hoo...
This is much !!
Now if you have chainer you will be able to put at least !! ( I can confirm
later for more ) 10 instances of UAD1 plugins on same audiotrack without
adding latency !!
Means if you use chainer (come on buy ity ..) and the free spinaudio lite
to wrap chainer you would have for all 10 uad plugz (if you are crazy enouph)
4096 samples alltogether means 92,8 ms !!!!!
That is what I call a DISCOVERY.
I for sure am extermely happy with this.
Now see what you can do with all these.
First using the compressor 1176LN you can put it to severe compressing where
then you have a volume to bus it on OUTPUT.
Then if you try an eq you are eq"ing the dry signal and not the compressed
!, and then you have also a separate volume for the eq'ed vox, then add
some dreamverb or Realverb and use the dry vocal again as feed !, then you
have also the reverb volume as separate to add it on top of the dry, compressed
equed vox, all time alligned !!!
If you use two tracks with same vox as stereo you can also have a panpot
for every UAD1 instance across the stereo field and the stereo reverb return
and the stereo delays etc all these for 4096 samples as total, isn't that
great !
With that latency you can work your automation better right ?
The how on my next post just curious to see if anyone is quick enouph to
respond that he likes what he reads :)
Regards,
Dimitrios
|
|
|
|
| Re: This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66955 is a reply to message #66954] |
Mon, 17 April 2006 04:56  |
Don Nafe
Messages: 1206
Registered: July 2005
|
Senior Member |
|
|
Hey Dimitrios
Back in September you mentioned that Spinaudio could make a VST2ASIO for
Paris
Any word?
Don
"Dimitrios" <musurgio@otenet.gr> wrote in message news:444378ce$1@linux...
>
> Hello,
> Today must be my day and yours by the way...
> The chainer still amazes me !!
> See what I found !!!
>
> You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?) and you
> would
> like to put say 3-4 UAD1 plugins on one audio track like say a vox, maybe
> a 1176LN and then a cambridge eq and a dreamverb for the vox only and then
> maybe a limiter plug all UAD1 plugz, that would normally in your situation
> using FXpansion give you 4 time 16384 sample latency means 65536 sample
> latency
> or in ms 1486.08 which means around 1.5 sec latency, hoo...
> This is much !!
> Now if you have chainer you will be able to put at least !! ( I can
> confirm
> later for more ) 10 instances of UAD1 plugins on same audiotrack without
> adding latency !!
> Means if you use chainer (come on buy ity ..) and the free spinaudio lite
> to wrap chainer you would have for all 10 uad plugz (if you are crazy
> enouph)
> 4096 samples alltogether means 92,8 ms !!!!!
>
> That is what I call a DISCOVERY.
> I for sure am extermely happy with this.
> Now see what you can do with all these.
>
> First using the compressor 1176LN you can put it to severe compressing
> where
> then you have a volume to bus it on OUTPUT.
> Then if you try an eq you are eq"ing the dry signal and not the compressed
> !, and then you have also a separate volume for the eq'ed vox, then add
> some dreamverb or Realverb and use the dry vocal again as feed !, then you
> have also the reverb volume as separate to add it on top of the dry,
> compressed
> equed vox, all time alligned !!!
> If you use two tracks with same vox as stereo you can also have a panpot
> for every UAD1 instance across the stereo field and the stereo reverb
> return
> and the stereo delays etc all these for 4096 samples as total, isn't that
> great !
> With that latency you can work your automation better right ?
>
> The how on my next post just curious to see if anyone is quick enouph to
> respond that he likes what he reads :)
> Regards,
> Dimitrios
|
|
|
|
| Re: This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66956 is a reply to message #66955] |
Mon, 17 April 2006 06:39 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Dear Don,
No they did not want to try it out eventually.
It is like wormhole only two or three of use eventually bought this so we
can not expect much of a Paris oriented support if the plugin does not qualifies
for other users too.
Regards,
Dimitrios
"Don Nafe" <dnafe@magma.ca> wrote:
>Hey Dimitrios
>
>Back in September you mentioned that Spinaudio could make a VST2ASIO for
>Paris
>
>Any word?
>
>Don
>
>"Dimitrios" <musurgio@otenet.gr> wrote in message news:444378ce$1@linux...
>>
>> Hello,
>> Today must be my day and yours by the way...
>> The chainer still amazes me !!
>> See what I found !!!
>>
>> You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?) and you
>> would
>> like to put say 3-4 UAD1 plugins on one audio track like say a vox, maybe
>> a 1176LN and then a cambridge eq and a dreamverb for the vox only and
then
>> maybe a limiter plug all UAD1 plugz, that would normally in your situation
>> using FXpansion give you 4 time 16384 sample latency means 65536 sample
>> latency
>> or in ms 1486.08 which means around 1.5 sec latency, hoo...
>> This is much !!
>> Now if you have chainer you will be able to put at least !! ( I can
>> confirm
>> later for more ) 10 instances of UAD1 plugins on same audiotrack without
>> adding latency !!
>> Means if you use chainer (come on buy ity ..) and the free spinaudio lite
>> to wrap chainer you would have for all 10 uad plugz (if you are crazy
>> enouph)
>> 4096 samples alltogether means 92,8 ms !!!!!
>>
>> That is what I call a DISCOVERY.
>> I for sure am extermely happy with this.
>> Now see what you can do with all these.
>>
>> First using the compressor 1176LN you can put it to severe compressing
>> where
>> then you have a volume to bus it on OUTPUT.
>> Then if you try an eq you are eq"ing the dry signal and not the compressed
>> !, and then you have also a separate volume for the eq'ed vox, then
add
>> some dreamverb or Realverb and use the dry vocal again as feed !, then
you
>> have also the reverb volume as separate to add it on top of the dry,
>> compressed
>> equed vox, all time alligned !!!
>> If you use two tracks with same vox as stereo you can also have a panpot
>> for every UAD1 instance across the stereo field and the stereo reverb
>> return
>> and the stereo delays etc all these for 4096 samples as total, isn't that
>> great !
>> With that latency you can work your automation better right ?
>>
>> The how on my next post just curious to see if anyone is quick enouph
to
>> respond that he likes what he reads :)
>> Regards,
>> Dimitrios
>
>
|
|
|
|
| Re: This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66962 is a reply to message #66956] |
Mon, 17 April 2006 07:24 |
cujo
Messages: 285
Registered: July 2005
|
Senior Member |
|
|
Oh man, D
I really would like to try this stuff out, but I must admit to being chicken.
as my system works, I fear changing anything!
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Dear Don,
>No they did not want to try it out eventually.
>It is like wormhole only two or three of use eventually bought this so we
>can not expect much of a Paris oriented support if the plugin does not qualifies
>for other users too.
>Regards,
>Dimitrios
>
>"Don Nafe" <dnafe@magma.ca> wrote:
>>Hey Dimitrios
>>
>>Back in September you mentioned that Spinaudio could make a VST2ASIO for
>
>>Paris
>>
>>Any word?
>>
>>Don
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote in message news:444378ce$1@linux...
>>>
>>> Hello,
>>> Today must be my day and yours by the way...
>>> The chainer still amazes me !!
>>> See what I found !!!
>>>
>>> You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?) and you
>
>>> would
>>> like to put say 3-4 UAD1 plugins on one audio track like say a vox, maybe
>>> a 1176LN and then a cambridge eq and a dreamverb for the vox only and
>then
>>> maybe a limiter plug all UAD1 plugz, that would normally in your situation
>>> using FXpansion give you 4 time 16384 sample latency means 65536 sample
>
>>> latency
>>> or in ms 1486.08 which means around 1.5 sec latency, hoo...
>>> This is much !!
>>> Now if you have chainer you will be able to put at least !! ( I can
>>> confirm
>>> later for more ) 10 instances of UAD1 plugins on same audiotrack without
>>> adding latency !!
>>> Means if you use chainer (come on buy ity ..) and the free spinaudio
lite
>>> to wrap chainer you would have for all 10 uad plugz (if you are crazy
>
>>> enouph)
>>> 4096 samples alltogether means 92,8 ms !!!!!
>>>
>>> That is what I call a DISCOVERY.
>>> I for sure am extermely happy with this.
>>> Now see what you can do with all these.
>>>
>>> First using the compressor 1176LN you can put it to severe compressing
>
>>> where
>>> then you have a volume to bus it on OUTPUT.
>>> Then if you try an eq you are eq"ing the dry signal and not the compressed
>>> !, and then you have also a separate volume for the eq'ed vox, then
>add
>>> some dreamverb or Realverb and use the dry vocal again as feed !, then
>you
>>> have also the reverb volume as separate to add it on top of the dry,
>>> compressed
>>> equed vox, all time alligned !!!
>>> If you use two tracks with same vox as stereo you can also have a panpot
>>> for every UAD1 instance across the stereo field and the stereo reverb
>
>>> return
>>> and the stereo delays etc all these for 4096 samples as total, isn't
that
>>> great !
>>> With that latency you can work your automation better right ?
>>>
>>> The how on my next post just curious to see if anyone is quick enouph
>to
>>> respond that he likes what he reads :)
>>> Regards,
>>> Dimitrios
>>
>>
>
|
|
|
|
| Re: This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66967 is a reply to message #66962] |
Mon, 17 April 2006 08:13 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Hey guys, To clear things up !!
USING CHAINER you DON'T risk your PARIS !!
I just had my second thoughts on using the eds transfer string 8,16 which
is a complete different thing ok ?
Secondly you have to go to www.spinaudio.com and download the free LIte Spinaudio
wrapper...
Then find chainer as a demo and try the UAD-1 scenario of no more than 4096
samples latency no matter how many UAD plugins you are using per track..
Chainer has 10 pages
You just open on each page a input module and then a UAD1 plugin
All ten pages are either summed to output or to another page !!
Possibilities are endless.
You don't risk anyting again ...
You have though to have UAD1 or Powercore cards to have a true benefit...
For those not having that you can still use the ten Chainer pages as for
your advantage.
Each page can have its own plugin (vst) like page 1 a compressor page two
an equaliser (from dry signal not compressed !) page three a reverb (from
dry signal feeding again) and then with separate volume you can either output
directly or bus it to another chainer's page for a total plugin like a limiter
!
You can ske questions , that means that I don't do all these just for me.
Regards,
Dimitrios
"cujo" <chris@nospamapplemanstudio.com> wrote:
>
>
>Oh man, D
>I really would like to try this stuff out, but I must admit to being chicken.
>as my system works, I fear changing anything!
>
>
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>Dear Don,
>>No they did not want to try it out eventually.
>>It is like wormhole only two or three of use eventually bought this so
we
>>can not expect much of a Paris oriented support if the plugin does not
qualifies
>>for other users too.
>>Regards,
>>Dimitrios
>>
>>"Don Nafe" <dnafe@magma.ca> wrote:
>>>Hey Dimitrios
>>>
>>>Back in September you mentioned that Spinaudio could make a VST2ASIO for
>>
>>>Paris
>>>
>>>Any word?
>>>
>>>Don
>>>
>>>"Dimitrios" <musurgio@otenet.gr> wrote in message news:444378ce$1@linux...
>>>>
>>>> Hello,
>>>> Today must be my day and yours by the way...
>>>> The chainer still amazes me !!
>>>> See what I found !!!
>>>>
>>>> You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?) and you
>>
>>>> would
>>>> like to put say 3-4 UAD1 plugins on one audio track like say a vox,
maybe
>>>> a 1176LN and then a cambridge eq and a dreamverb for the vox only and
>>then
>>>> maybe a limiter plug all UAD1 plugz, that would normally in your situation
>>>> using FXpansion give you 4 time 16384 sample latency means 65536 sample
>>
>>>> latency
>>>> or in ms 1486.08 which means around 1.5 sec latency, hoo...
>>>> This is much !!
>>>> Now if you have chainer you will be able to put at least !! ( I can
>>>> confirm
>>>> later for more ) 10 instances of UAD1 plugins on same audiotrack without
>>>> adding latency !!
>>>> Means if you use chainer (come on buy ity ..) and the free spinaudio
>lite
>>>> to wrap chainer you would have for all 10 uad plugz (if you are crazy
>>
>>>> enouph)
>>>> 4096 samples alltogether means 92,8 ms !!!!!
>>>>
>>>> That is what I call a DISCOVERY.
>>>> I for sure am extermely happy with this.
>>>> Now see what you can do with all these.
>>>>
>>>> First using the compressor 1176LN you can put it to severe compressing
>>
>>>> where
>>>> then you have a volume to bus it on OUTPUT.
>>>> Then if you try an eq you are eq"ing the dry signal and not the compressed
>>>> !, and then you have also a separate volume for the eq'ed vox, then
>>add
>>>> some dreamverb or Realverb and use the dry vocal again as feed !, then
>>you
>>>> have also the reverb volume as separate to add it on top of the dry,
>
>>>> compressed
>>>> equed vox, all time alligned !!!
>>>> If you use two tracks with same vox as stereo you can also have a panpot
>>>> for every UAD1 instance across the stereo field and the stereo reverb
>>
>>>> return
>>>> and the stereo delays etc all these for 4096 samples as total, isn't
>that
>>>> great !
>>>> With that latency you can work your automation better right ?
>>>>
>>>> The how on my next post just curious to see if anyone is quick enouph
>>to
>>>> respond that he likes what he reads :)
>>>> Regards,
>>>> Dimitrios
>>>
>>>
>>
|
|
|
|
| Re: This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66968 is a reply to message #66967] |
Mon, 17 April 2006 09:12 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
This is starting to tempt me. 4096 samples isn't impossible to work with
using Paris automation. Actually, you could create a mix template with
Sampleslide set to 384 samples on each channel. then it would be as simple
as opening as many UAD-1 plugins as you wanted on any track and nudging that
track by 100ms in the Paris editor. Might take a bit of getting used to with
real time fader moves, but this same thing happens in heavy track count
projects in Cubase SX using the Houston controller if I have the buffer
settings boosted. It's just a matter of getting the feel of it.
*^&%$%$#^&^$ Dimitrios!!!!!!.......I guess I may have to try this when I get
the time.
Now I'm going to have to rethink how to get 3 x EDS cards and 4 UAD cards
happening in a Magma. (actually, I already know *exactly* how it will work
as far as IRQ assignments go when interfacing with my mobo ;.)
but then I'll need to figure out how to be able to use Paris with a dual
core CPU on an ASUS A8V mobo so I can move it all over to my Cubase DAW.
;o)
"Dimitrios" <musurgio@otenet.gr> wrote in message news:4443b0ad$1@linux...
>
> Hey guys, To clear things up !!
> USING CHAINER you DON'T risk your PARIS !!
> I just had my second thoughts on using the eds transfer string 8,16 which
> is a complete different thing ok ?
>
> Secondly you have to go to www.spinaudio.com and download the free LIte
Spinaudio
> wrapper...
>
> Then find chainer as a demo and try the UAD-1 scenario of no more than
4096
> samples latency no matter how many UAD plugins you are using per track..
>
> Chainer has 10 pages
> You just open on each page a input module and then a UAD1 plugin
> All ten pages are either summed to output or to another page !!
> Possibilities are endless.
> You don't risk anyting again ...
>
> You have though to have UAD1 or Powercore cards to have a true benefit...
>
> For those not having that you can still use the ten Chainer pages as for
> your advantage.
> Each page can have its own plugin (vst) like page 1 a compressor page two
> an equaliser (from dry signal not compressed !) page three a reverb (from
> dry signal feeding again) and then with separate volume you can either
output
> directly or bus it to another chainer's page for a total plugin like a
limiter
> !
>
> You can ske questions , that means that I don't do all these just for me.
> Regards,
> Dimitrios
>
> "cujo" <chris@nospamapplemanstudio.com> wrote:
> >
> >
> >Oh man, D
> >I really would like to try this stuff out, but I must admit to being
chicken.
> >as my system works, I fear changing anything!
> >
> >
> >
> >"Dimitrios" <musurgio@otenet.gr> wrote:
> >>
> >>Dear Don,
> >>No they did not want to try it out eventually.
> >>It is like wormhole only two or three of use eventually bought this so
> we
> >>can not expect much of a Paris oriented support if the plugin does not
> qualifies
> >>for other users too.
> >>Regards,
> >>Dimitrios
> >>
> >>"Don Nafe" <dnafe@magma.ca> wrote:
> >>>Hey Dimitrios
> >>>
> >>>Back in September you mentioned that Spinaudio could make a VST2ASIO
for
> >>
> >>>Paris
> >>>
> >>>Any word?
> >>>
> >>>Don
> >>>
> >>>"Dimitrios" <musurgio@otenet.gr> wrote in message
news:444378ce$1@linux...
> >>>>
> >>>> Hello,
> >>>> Today must be my day and yours by the way...
> >>>> The chainer still amazes me !!
> >>>> See what I found !!!
> >>>>
> >>>> You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?) and
you
> >>
> >>>> would
> >>>> like to put say 3-4 UAD1 plugins on one audio track like say a vox,
> maybe
> >>>> a 1176LN and then a cambridge eq and a dreamverb for the vox only and
> >>then
> >>>> maybe a limiter plug all UAD1 plugz, that would normally in your
situation
> >>>> using FXpansion give you 4 time 16384 sample latency means 65536
sample
> >>
> >>>> latency
> >>>> or in ms 1486.08 which means around 1.5 sec latency, hoo...
> >>>> This is much !!
> >>>> Now if you have chainer you will be able to put at least !! ( I can
>
> >>>> confirm
> >>>> later for more ) 10 instances of UAD1 plugins on same audiotrack
without
> >>>> adding latency !!
> >>>> Means if you use chainer (come on buy ity ..) and the free spinaudio
> >lite
> >>>> to wrap chainer you would have for all 10 uad plugz (if you are crazy
> >>
> >>>> enouph)
> >>>> 4096 samples alltogether means 92,8 ms !!!!!
> >>>>
> >>>> That is what I call a DISCOVERY.
> >>>> I for sure am extermely happy with this.
> >>>> Now see what you can do with all these.
> >>>>
> >>>> First using the compressor 1176LN you can put it to severe
compressing
> >>
> >>>> where
> >>>> then you have a volume to bus it on OUTPUT.
> >>>> Then if you try an eq you are eq"ing the dry signal and not the
compressed
> >>>> !, and then you have also a separate volume for the eq'ed vox, then
> >>add
> >>>> some dreamverb or Realverb and use the dry vocal again as feed !,
then
> >>you
> >>>> have also the reverb volume as separate to add it on top of the dry,
> >
> >>>> compressed
> >>>> equed vox, all time alligned !!!
> >>>> If you use two tracks with same vox as stereo you can also have a
panpot
> >>>> for every UAD1 instance across the stereo field and the stereo reverb
> >>
> >>>> return
> >>>> and the stereo delays etc all these for 4096 samples as total, isn't
> >that
> >>>> great !
> >>>> With that latency you can work your automation better right ?
> >>>>
> >>>> The how on my next post just curious to see if anyone is quick enouph
> >>to
> >>>> respond that he likes what he reads :)
> >>>> Regards,
> >>>> Dimitrios
> >>>
> >>>
> >>
>
|
|
|
|
| Re: This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66969 is a reply to message #66968] |
Mon, 17 April 2006 09:15 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
errrr.......let me explain.......Sampleslide would have 384 samples as a
preset. It would just be inserted as a plugin at *0* ms. Then, on the
channel you wanted to insert the UAD-1 plugin on, you would first enable the
384sample preset, then insert the UAD-1 plugin(s), then nudge the track to
the left by 100 *Paris* ms and you're done.
;o)
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:4443bfc9@linux...
> This is starting to tempt me. 4096 samples isn't impossible to work with
> using Paris automation. Actually, you could create a mix template with
> Sampleslide set to 384 samples on each channel. then it would be as simple
> as opening as many UAD-1 plugins as you wanted on any track and nudging
that
> track by 100ms in the Paris editor. Might take a bit of getting used to
with
> real time fader moves, but this same thing happens in heavy track count
> projects in Cubase SX using the Houston controller if I have the buffer
> settings boosted. It's just a matter of getting the feel of it.
>
> *^&%$%$#^&^$ Dimitrios!!!!!!.......I guess I may have to try this when I
get
> the time.
>
> Now I'm going to have to rethink how to get 3 x EDS cards and 4 UAD cards
> happening in a Magma. (actually, I already know *exactly* how it will work
> as far as IRQ assignments go when interfacing with my mobo ;.)
>
> but then I'll need to figure out how to be able to use Paris with a dual
> core CPU on an ASUS A8V mobo so I can move it all over to my Cubase DAW.
>
> ;o)
>
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:4443b0ad$1@linux...
> >
> > Hey guys, To clear things up !!
> > USING CHAINER you DON'T risk your PARIS !!
> > I just had my second thoughts on using the eds transfer string 8,16
which
> > is a complete different thing ok ?
> >
> > Secondly you have to go to www.spinaudio.com and download the free LIte
> Spinaudio
> > wrapper...
> >
> > Then find chainer as a demo and try the UAD-1 scenario of no more than
> 4096
> > samples latency no matter how many UAD plugins you are using per
track..
> >
> > Chainer has 10 pages
> > You just open on each page a input module and then a UAD1 plugin
> > All ten pages are either summed to output or to another page !!
> > Possibilities are endless.
> > You don't risk anyting again ...
> >
> > You have though to have UAD1 or Powercore cards to have a true
benefit...
> >
> > For those not having that you can still use the ten Chainer pages as for
> > your advantage.
> > Each page can have its own plugin (vst) like page 1 a compressor page
two
> > an equaliser (from dry signal not compressed !) page three a reverb
(from
> > dry signal feeding again) and then with separate volume you can either
> output
> > directly or bus it to another chainer's page for a total plugin like a
> limiter
> > !
> >
> > You can ske questions , that means that I don't do all these just for
me.
> > Regards,
> > Dimitrios
> >
> > "cujo" <chris@nospamapplemanstudio.com> wrote:
> > >
> > >
> > >Oh man, D
> > >I really would like to try this stuff out, but I must admit to being
> chicken.
> > >as my system works, I fear changing anything!
> > >
> > >
> > >
> > >"Dimitrios" <musurgio@otenet.gr> wrote:
> > >>
> > >>Dear Don,
> > >>No they did not want to try it out eventually.
> > >>It is like wormhole only two or three of use eventually bought this so
> > we
> > >>can not expect much of a Paris oriented support if the plugin does not
> > qualifies
> > >>for other users too.
> > >>Regards,
> > >>Dimitrios
> > >>
> > >>"Don Nafe" <dnafe@magma.ca> wrote:
> > >>>Hey Dimitrios
> > >>>
> > >>>Back in September you mentioned that Spinaudio could make a VST2ASIO
> for
> > >>
> > >>>Paris
> > >>>
> > >>>Any word?
> > >>>
> > >>>Don
> > >>>
> > >>>"Dimitrios" <musurgio@otenet.gr> wrote in message
> news:444378ce$1@linux...
> > >>>>
> > >>>> Hello,
> > >>>> Today must be my day and yours by the way...
> > >>>> The chainer still amazes me !!
> > >>>> See what I found !!!
> > >>>>
> > >>>> You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?) and
> you
> > >>
> > >>>> would
> > >>>> like to put say 3-4 UAD1 plugins on one audio track like say a vox,
> > maybe
> > >>>> a 1176LN and then a cambridge eq and a dreamverb for the vox only
and
> > >>then
> > >>>> maybe a limiter plug all UAD1 plugz, that would normally in your
> situation
> > >>>> using FXpansion give you 4 time 16384 sample latency means 65536
> sample
> > >>
> > >>>> latency
> > >>>> or in ms 1486.08 which means around 1.5 sec latency, hoo...
> > >>>> This is much !!
> > >>>> Now if you have chainer you will be able to put at least !! ( I can
> >
> > >>>> confirm
> > >>>> later for more ) 10 instances of UAD1 plugins on same audiotrack
> without
> > >>>> adding latency !!
> > >>>> Means if you use chainer (come on buy ity ..) and the free
spinaudio
> > >lite
> > >>>> to wrap chainer you would have for all 10 uad plugz (if you are
crazy
> > >>
> > >>>> enouph)
> > >>>> 4096 samples alltogether means 92,8 ms !!!!!
> > >>>>
> > >>>> That is what I call a DISCOVERY.
> > >>>> I for sure am extermely happy with this.
> > >>>> Now see what you can do with all these.
> > >>>>
> > >>>> First using the compressor 1176LN you can put it to severe
> compressing
> > >>
> > >>>> where
> > >>>> then you have a volume to bus it on OUTPUT.
> > >>>> Then if you try an eq you are eq"ing the dry signal and not the
> compressed
> > >>>> !, and then you have also a separate volume for the eq'ed vox,
then
> > >>add
> > >>>> some dreamverb or Realverb and use the dry vocal again as feed !,
> then
> > >>you
> > >>>> have also the reverb volume as separate to add it on top of the
dry,
> > >
> > >>>> compressed
> > >>>> equed vox, all time alligned !!!
> > >>>> If you use two tracks with same vox as stereo you can also have a
> panpot
> > >>>> for every UAD1 instance across the stereo field and the stereo
reverb
> > >>
> > >>>> return
> > >>>> and the stereo delays etc all these for 4096 samples as total,
isn't
> > >that
> > >>>> great !
> > >>>> With that latency you can work your automation better right ?
> > >>>>
> > >>>> The how on my next post just curious to see if anyone is quick
enouph
> > >>to
> > >>>> respond that he likes what he reads :)
> > >>>> Regards,
> > >>>> Dimitrios
> > >>>
> > >>>
> > >>
> >
>
>
|
|
|
|
| Re: This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66970 is a reply to message #66969] |
Mon, 17 April 2006 09:33 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Dear DJ,
Do you wanna make it for you more interesting !!!?
You can use the free ( I have also the code of it !) multifxvst wrapper !!
tHIS FROM INSIDE CHAINER !
Now latency of UAD1 is reduced to 2048 samples !!!!!!
Don't you like it ?
There is though a drawback, not for me but for mostb of you I guess, multifxvst
according to my trials uses only 16bit files, I also do the same !
Also please use the free Voxengo sample latency for the 384 samples nudge
inside the chainer (vst) remember you will need chainer for all these...
2048 samples for as many UAD1 plugins as you want per track !!
ANOTHER uad1 BUG
When you will load your saved song it will say (uad1 prompt) time mismatch
error,powercore cards do not do that and they work at 1024 samples latency
with above scenario !!!!!!!!!
Regards,
Dimitrios
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>errrr.......let me explain.......Sampleslide would have 384 samples as a
>preset. It would just be inserted as a plugin at *0* ms. Then, on the
>channel you wanted to insert the UAD-1 plugin on, you would first enable
the
>384sample preset, then insert the UAD-1 plugin(s), then nudge the track
to
>the left by 100 *Paris* ms and you're done.
>
>;o)
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>news:4443bfc9@linux...
>> This is starting to tempt me. 4096 samples isn't impossible to work with
>> using Paris automation. Actually, you could create a mix template with
>> Sampleslide set to 384 samples on each channel. then it would be as simple
>> as opening as many UAD-1 plugins as you wanted on any track and nudging
>that
>> track by 100ms in the Paris editor. Might take a bit of getting used to
>with
>> real time fader moves, but this same thing happens in heavy track count
>> projects in Cubase SX using the Houston controller if I have the buffer
>> settings boosted. It's just a matter of getting the feel of it.
>>
>> *^&%$%$#^&^$ Dimitrios!!!!!!.......I guess I may have to try this when
I
>get
>> the time.
>>
>> Now I'm going to have to rethink how to get 3 x EDS cards and 4 UAD cards
>> happening in a Magma. (actually, I already know *exactly* how it will
work
>> as far as IRQ assignments go when interfacing with my mobo ;.)
>>
>> but then I'll need to figure out how to be able to use Paris with a dual
>> core CPU on an ASUS A8V mobo so I can move it all over to my Cubase DAW.
>>
>> ;o)
>>
>>
>>
>> "Dimitrios" <musurgio@otenet.gr> wrote in message news:4443b0ad$1@linux...
>> >
>> > Hey guys, To clear things up !!
>> > USING CHAINER you DON'T risk your PARIS !!
>> > I just had my second thoughts on using the eds transfer string 8,16
>which
>> > is a complete different thing ok ?
>> >
>> > Secondly you have to go to www.spinaudio.com and download the free LIte
>> Spinaudio
>> > wrapper...
>> >
>> > Then find chainer as a demo and try the UAD-1 scenario of no more than
>> 4096
>> > samples latency no matter how many UAD plugins you are using per
>track..
>> >
>> > Chainer has 10 pages
>> > You just open on each page a input module and then a UAD1 plugin
>> > All ten pages are either summed to output or to another page !!
>> > Possibilities are endless.
>> > You don't risk anyting again ...
>> >
>> > You have though to have UAD1 or Powercore cards to have a true
>benefit...
>> >
>> > For those not having that you can still use the ten Chainer pages as
for
>> > your advantage.
>> > Each page can have its own plugin (vst) like page 1 a compressor page
>two
>> > an equaliser (from dry signal not compressed !) page three a reverb
>(from
>> > dry signal feeding again) and then with separate volume you can either
>> output
>> > directly or bus it to another chainer's page for a total plugin like
a
>> limiter
>> > !
>> >
>> > You can ske questions , that means that I don't do all these just for
>me.
>> > Regards,
>> > Dimitrios
>> >
>> > "cujo" <chris@nospamapplemanstudio.com> wrote:
>> > >
>> > >
>> > >Oh man, D
>> > >I really would like to try this stuff out, but I must admit to being
>> chicken.
>> > >as my system works, I fear changing anything!
>> > >
>> > >
>> > >
>> > >"Dimitrios" <musurgio@otenet.gr> wrote:
>> > >>
>> > >>Dear Don,
>> > >>No they did not want to try it out eventually.
>> > >>It is like wormhole only two or three of use eventually bought this
so
>> > we
>> > >>can not expect much of a Paris oriented support if the plugin does
not
>> > qualifies
>> > >>for other users too.
>> > >>Regards,
>> > >>Dimitrios
>> > >>
>> > >>"Don Nafe" <dnafe@magma.ca> wrote:
>> > >>>Hey Dimitrios
>> > >>>
>> > >>>Back in September you mentioned that Spinaudio could make a VST2ASIO
>> for
>> > >>
>> > >>>Paris
>> > >>>
>> > >>>Any word?
>> > >>>
>> > >>>Don
>> > >>>
>> > >>>"Dimitrios" <musurgio@otenet.gr> wrote in message
>> news:444378ce$1@linux...
>> > >>>>
>> > >>>> Hello,
>> > >>>> Today must be my day and yours by the way...
>> > >>>> The chainer still amazes me !!
>> > >>>> See what I found !!!
>> > >>>>
>> > >>>> You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?)
and
>> you
>> > >>
>> > >>>> would
>> > >>>> like to put say 3-4 UAD1 plugins on one audio track like say a
vox,
>> > maybe
>> > >>>> a 1176LN and then a cambridge eq and a dreamverb for the vox only
>and
>> > >>then
>> > >>>> maybe a limiter plug all UAD1 plugz, that would normally in your
>> situation
>> > >>>> using FXpansion give you 4 time 16384 sample latency means 65536
>> sample
>> > >>
>> > >>>> latency
>> > >>>> or in ms 1486.08 which means around 1.5 sec latency, hoo...
>> > >>>> This is much !!
>> > >>>> Now if you have chainer you will be able to put at least !! ( I
can
>> >
>> > >>>> confirm
>> > >>>> later for more ) 10 instances of UAD1 plugins on same audiotrack
>> without
>> > >>>> adding latency !!
>> > >>>> Means if you use chainer (come on buy ity ..) and the free
>spinaudio
>> > >lite
>> > >>>> to wrap chainer you would have for all 10 uad plugz (if you are
>crazy
>> > >>
>> > >>>> enouph)
>> > >>>> 4096 samples alltogether means 92,8 ms !!!!!
>> > >>>>
>> > >>>> That is what I call a DISCOVERY.
>> > >>>> I for sure am extermely happy with this.
>> > >>>> Now see what you can do with all these.
>> > >>>>
>> > >>>> First using the compressor 1176LN you can put it to severe
>> compressing
>> > >>
>> > >>>> where
>> > >>>> then you have a volume to bus it on OUTPUT.
>> > >>>> Then if you try an eq you are eq"ing the dry signal and not the
>> compressed
>> > >>>> !, and then you have also a separate volume for the eq'ed vox,
>then
>> > >>add
>> > >>>> some dreamverb or Realverb and use the dry vocal again as feed
!,
>> then
>> > >>you
>> > >>>> have also the reverb volume as separate to add it on top of the
>dry,
>> > >
>> > >>>> compressed
>> > >>>> equed vox, all time alligned !!!
>> > >>>> If you use two tracks with same vox as stereo you can also have
a
>> panpot
>> > >>>> for every UAD1 instance across the stereo field and the stereo
>reverb
>> > >>
>> > >>>> return
>> > >>>> and the stereo delays etc all these for 4096 samples as total,
>isn't
>> > >that
>> > >>>> great !
>> > >>>> With that latency you can work your automation better right ?
>> > >>>>
>> > >>>> The how on my next post just curious to see if anyone is quick
>enouph
>> > >>to
>> > >>>> respond that he likes what he reads :)
>> > >>>> Regards,
>> > >>>> Dimitrios
>> > >>>
>> > >>>
>> > >>
>> >
>>
>>
>
>
|
|
|
|
| Re: This_is_my_best_discover_lately!!_UAD1_users_and_not_only [message #66971 is a reply to message #66970] |
Mon, 17 April 2006 09:50 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
After some new testing I cannot make UAD1 card suffer form the time error
mismatch buffer thing.
Don't knowif it is because I have put 4.2 UAD version.
I will let you know with this.
Dimitrios
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Dear DJ,
>Do you wanna make it for you more interesting !!!?
>You can use the free ( I have also the code of it !) multifxvst wrapper
!!
>tHIS FROM INSIDE CHAINER !
>Now latency of UAD1 is reduced to 2048 samples !!!!!!
>Don't you like it ?
>There is though a drawback, not for me but for mostb of you I guess, multifxvst
>according to my trials uses only 16bit files, I also do the same !
>Also please use the free Voxengo sample latency for the 384 samples nudge
>inside the chainer (vst) remember you will need chainer for all these...
>2048 samples for as many UAD1 plugins as you want per track !!
>
>ANOTHER uad1 BUG
>When you will load your saved song it will say (uad1 prompt) time mismatch
>error,powercore cards do not do that and they work at 1024 samples latency
>with above scenario !!!!!!!!!
>Regards,
>Dimitrios
>
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>>errrr.......let me explain.......Sampleslide would have 384 samples as
a
>>preset. It would just be inserted as a plugin at *0* ms. Then, on the
>>channel you wanted to insert the UAD-1 plugin on, you would first enable
>the
>>384sample preset, then insert the UAD-1 plugin(s), then nudge the track
>to
>>the left by 100 *Paris* ms and you're done.
>>
>>;o)
>>
>>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>>news:4443bfc9@linux...
>>> This is starting to tempt me. 4096 samples isn't impossible to work with
>>> using Paris automation. Actually, you could create a mix template with
>>> Sampleslide set to 384 samples on each channel. then it would be as simple
>>> as opening as many UAD-1 plugins as you wanted on any track and nudging
>>that
>>> track by 100ms in the Paris editor. Might take a bit of getting used
to
>>with
>>> real time fader moves, but this same thing happens in heavy track count
>>> projects in Cubase SX using the Houston controller if I have the buffer
>>> settings boosted. It's just a matter of getting the feel of it.
>>>
>>> *^&%$%$#^&^$ Dimitrios!!!!!!.......I guess I may have to try this when
>I
>>get
>>> the time.
>>>
>>> Now I'm going to have to rethink how to get 3 x EDS cards and 4 UAD
cards
>>> happening in a Magma. (actually, I already know *exactly* how it will
>work
>>> as far as IRQ assignments go when interfacing with my mobo ;.)
>>>
>>> but then I'll need to figure out how to be able to use Paris with a dual
>>> core CPU on an ASUS A8V mobo so I can move it all over to my Cubase DAW.
>>>
>>> ;o)
>>>
>>>
>>>
>>> "Dimitrios" <musurgio@otenet.gr> wrote in message news:4443b0ad$1@linux...
>>> >
>>> > Hey guys, To clear things up !!
>>> > USING CHAINER you DON'T risk your PARIS !!
>>> > I just had my second thoughts on using the eds transfer string 8,16
>>which
>>> > is a complete different thing ok ?
>>> >
>>> > Secondly you have to go to www.spinaudio.com and download the free
LIte
>>> Spinaudio
>>> > wrapper...
>>> >
>>> > Then find chainer as a demo and try the UAD-1 scenario of no more than
>>> 4096
>>> > samples latency no matter how many UAD plugins you are using per
>>track..
>>> >
>>> > Chainer has 10 pages
>>> > You just open on each page a input module and then a UAD1 plugin
>>> > All ten pages are either summed to output or to another page !!
>>> > Possibilities are endless.
>>> > You don't risk anyting again ...
>>> >
>>> > You have though to have UAD1 or Powercore cards to have a true
>>benefit...
>>> >
>>> > For those not having that you can still use the ten Chainer pages as
>for
>>> > your advantage.
>>> > Each page can have its own plugin (vst) like page 1 a compressor page
>>two
>>> > an equaliser (from dry signal not compressed !) page three a reverb
>>(from
>>> > dry signal feeding again) and then with separate volume you can either
>>> output
>>> > directly or bus it to another chainer's page for a total plugin like
>a
>>> limiter
>>> > !
>>> >
>>> > You can ske questions , that means that I don't do all these just for
>>me.
>>> > Regards,
>>> > Dimitrios
>>> >
>>> > "cujo" <chris@nospamapplemanstudio.com> wrote:
>>> > >
>>> > >
>>> > >Oh man, D
>>> > >I really would like to try this stuff out, but I must admit to being
>>> chicken.
>>> > >as my system works, I fear changing anything!
>>> > >
>>> > >
>>> > >
>>> > >"Dimitrios" <musurgio@otenet.gr> wrote:
>>> > >>
>>> > >>Dear Don,
>>> > >>No they did not want to try it out eventually.
>>> > >>It is like wormhole only two or three of use eventually bought this
>so
>>> > we
>>> > >>can not expect much of a Paris oriented support if the plugin does
>not
>>> > qualifies
>>> > >>for other users too.
>>> > >>Regards,
>>> > >>Dimitrios
>>> > >>
>>> > >>"Don Nafe" <dnafe@magma.ca> wrote:
>>> > >>>Hey Dimitrios
>>> > >>>
>>> > >>>Back in September you mentioned that Spinaudio could make a VST2ASIO
>>> for
>>> > >>
>>> > >>>Paris
>>> > >>>
>>> > >>>Any word?
>>> > >>>
>>> > >>>Don
>>> > >>>
>>> > >>>"Dimitrios" <musurgio@otenet.gr> wrote in message
>>> news:444378ce$1@linux...
>>> > >>>>
>>> > >>>> Hello,
>>> > >>>> Today must be my day and yours by the way...
>>> > >>>> The chainer still amazes me !!
>>> > >>>> See what I found !!!
>>> > >>>>
>>> > >>>> You are a UAD1 and maybe 3 and 4 UAD1 users (DJ how are you ?)
>and
>>> you
>>> > >>
>>> > >>>> would
>>> > >>>> like to put say 3-4 UAD1 plugins on one audio track like say a
>vox,
>>> > maybe
>>> > >>>> a 1176LN and then a cambridge eq and a dreamverb for the vox only
>>and
>>> > >>then
>>> > >>>> maybe a limiter plug all UAD1 plugz, that would normally in your
>>> situation
>>> > >>>> using FXpansion give you 4 time 16384 sample latency means 65536
>>> sample
>>> > >>
>>> > >>>> latency
>>> > >>>> or in ms 1486.08 which means around 1.5 sec latency, hoo...
>>> > >>>> This is much !!
>>> > >>>> Now if you have chainer you will be able to put at least !! (
I
>can
>>> >
>>> > >>>> confirm
>>> > >>>> later for more ) 10 instances of UAD1 plugins on same audiotrack
>>> without
>>> > >>>> adding latency !!
>>> > >>>> Means if you use chainer (come on buy ity ..) and the free
>>spinaudio
>>> > >lite
>>> > >>>> to wrap chainer you would have for all 10 uad plugz (if you are
>>crazy
>>> > >>
>>> > >>>> enouph)
>>> > >>>> 4096 samples alltogether means 92,8 ms !!!!!
>>> > >>>>
>>> > >>>> That is what I call a DISCOVERY.
>>> > >>>> I for sure am extermely happy with this.
>>> > >>>> Now see what you can do with all these.
>>> > >>>>
>>> > >>>> First using the compressor 1176LN you can put it to severe
>>> compressing
>>> > >>
>>> > >>>> where
>>> > >>>> then you have a volume to bus it on OUTPUT.
>>> > >>>> Then if you try an eq you are eq"ing the dry signal and not the
>>> compressed
>>> > >>>> !, and then you have also a separate volume for the eq'ed vox,
>>then
>>> > >>add
>>> > >>>> some dreamverb or Realverb and use the dry vocal again as feed
>!,
>>> then
>>> > >>you
>>> > >>>> have also the reverb volume as separate to add it on top of the
>>dry,
>>> > >
>>> > >>>> compressed
>>> > >>>> equed vox, all time alligned !!!
>>> > >>>> If you use two tracks with same vox as stereo you can also have
>a
>>> panpot
>>> > >>>> for every UAD1 instance across the stereo field and the stereo
>>reverb
>>> > >>
>>> > >>>> return
>>> > >>>> and the stereo delays etc all these for 4096 samples as total,
>>isn't
>>> > >that
>>> > >>>> great !
>>> > >>>> With that latency you can work your automation better right ?
>>> > >>>>
>>> > >>>> The how on my next post just curious to see if anyone is quick
>>enouph
>>> > >>to
>>> > >>>> respond that he likes what he reads :)
>>> > >>>> Regards,
>>> > >>>> Dimitrios
>>> > >>>
>>> > >>>
>>> > >>
>>> >
>>>
>>>
>>
>>
>
|
|
|
|
Goto Forum:
Current Time: Wed Sep 25 09:37:32 PDT 2024
Total time taken to generate the page: 0.01442 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
