The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Hall reverb almost done
Hall reverb almost done [message #97603] Sun, 30 March 2008 09:39 Go to next message
mike audet[3] is currently offline  mike audet[3]
Messages: 88
Registered: June 2008
Member
Hi All,

I just thought I'd let you know that I got one of the two hall algorithms
working this morning. I forgot to implement a rather important control,
but I don't expect it will be difficult to finish. I also have to make the
interface layout work a bit better.

I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or if it
is an updated version of it. But, it sounds incredibly smooth, full, and
wide. Just listening to the outputs is awesome. It sounds beautiful all
by itself. To my ears, it is an improvement over the dp/4 hall, but that
may be because of its 24 bit input and output, or because all the analog
circuitry is bypassed.

Anyway, it's coming soon, and it rocks!!!!

All the best,

Mike
Re: Hall reverb almost done [message #97604 is a reply to message #97603] Sun, 30 March 2008 10:11 Go to previous messageGo to next message
Robert is currently offline  Robert   UNITED STATES
Messages: 127
Registered: May 2007
Senior Member
Good stuff Mike...!!!


"Mike Audet" <mike@..> wrote in message news:47efc24d$1@linux...
>
> Hi All,
>
> I just thought I'd let you know that I got one of the two hall algorithms
> working this morning. I forgot to implement a rather important control,
> but I don't expect it will be difficult to finish. I also have to make
> the
> interface layout work a bit better.
>
> I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or if it
> is an updated version of it. But, it sounds incredibly smooth, full, and
> wide. Just listening to the outputs is awesome. It sounds beautiful all
> by itself. To my ears, it is an improvement over the dp/4 hall, but that
> may be because of its 24 bit input and output, or because all the analog
> circuitry is bypassed.
>
> Anyway, it's coming soon, and it rocks!!!!
>
> All the best,
>
> Mike
Re: Hall reverb almost done [message #97608 is a reply to message #97603] Sun, 30 March 2008 12:25 Go to previous messageGo to next message
rick is currently offline  rick   UNITED STATES
Messages: 1976
Registered: February 2006
Senior Member
i'l live in the glory of others...sigh...

On 31 Mar 2008 02:39:41 +1000, "Mike Audet" <mike@..> wrote:

>
>Hi All,
>
>I just thought I'd let you know that I got one of the two hall algorithms
>working this morning. I forgot to implement a rather important control,
>but I don't expect it will be difficult to finish. I also have to make the
>interface layout work a bit better.
>
>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or if it
>is an updated version of it. But, it sounds incredibly smooth, full, and
>wide. Just listening to the outputs is awesome. It sounds beautiful all
>by itself. To my ears, it is an improvement over the dp/4 hall, but that
>may be because of its 24 bit input and output, or because all the analog
>circuitry is bypassed.
>
>Anyway, it's coming soon, and it rocks!!!!
>
>All the best,
>
>Mike
Re: Hall reverb almost done [message #97614 is a reply to message #97603] Sun, 30 March 2008 15:14 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Dear Mike,
Thanks for what you are doing here for us !!!
You know that I donated for the amp some money.
I will add some more for the amp nd then for the reverb...or maybe once for
both when convinient...
Regarding the different amp versions I got confused with what is the best
!!
I tried to make some correstions s to be able to load all three changing
the name but what I succeeded with is that I have now three plugins under
the same name (could not effectively change that !) and although being able
to audition all I don't know which is what !
Can you please rename the amps as Amp1, Amp2 and Amp3 so that they can be
inserted that way ?
This way I can try all and hear which sounds best to my ears...
Thanks again!
Dimitrios

"Mike Audet" <mike@..> wrote:
>
>Hi All,
>
>I just thought I'd let you know that I got one of the two hall algorithms
>working this morning. I forgot to implement a rather important control,
>but I don't expect it will be difficult to finish. I also have to make
the
>interface layout work a bit better.
>
>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or if
it
>is an updated version of it. But, it sounds incredibly smooth, full, and
>wide. Just listening to the outputs is awesome. It sounds beautiful all
>by itself. To my ears, it is an improvement over the dp/4 hall, but that
>may be because of its 24 bit input and output, or because all the analog
>circuitry is bypassed.
>
>Anyway, it's coming soon, and it rocks!!!!
>
>All the best,
>
>Mike
Re: Hall reverb almost done [message #97616 is a reply to message #97614] Sun, 30 March 2008 15:24 Go to previous messageGo to next message
mike audet[3] is currently offline  mike audet[3]
Messages: 88
Registered: June 2008
Member
hi Dimitrios,

Thank you for all your feedback and support! I sent you an email with build
1.4 attached, but I think we've got some email issues for some reason between
us.

I just sent you a copy of 1.4 from my hotmail account. Let me know if this
doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron Allen
pointed me in the direction of how to improve it, and deserves a lot of credit
for this upgrade.

All the best!

Mike

"Dimitrios" <usurgio@otenet.gr> wrote:
>
>Dear Mike,
>Thanks for what you are doing here for us !!!
>You know that I donated for the amp some money.
>I will add some more for the amp nd then for the reverb...or maybe once
for
>both when convinient...
>Regarding the different amp versions I got confused with what is the best
>!!
>I tried to make some correstions s to be able to load all three changing
>the name but what I succeeded with is that I have now three plugins under
>the same name (could not effectively change that !) and although being able
>to audition all I don't know which is what !
>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they can be
>inserted that way ?
>This way I can try all and hear which sounds best to my ears...
>Thanks again!
>Dimitrios
>
>"Mike Audet" <mike@..> wrote:
>>
>>Hi All,
>>
>>I just thought I'd let you know that I got one of the two hall algorithms
>>working this morning. I forgot to implement a rather important control,
>>but I don't expect it will be difficult to finish. I also have to make
>the
>>interface layout work a bit better.
>>
>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or if
>it
>>is an updated version of it. But, it sounds incredibly smooth, full, and
>>wide. Just listening to the outputs is awesome. It sounds beautiful all
>>by itself. To my ears, it is an improvement over the dp/4 hall, but that
>>may be because of its 24 bit input and output, or because all the analog
>>circuitry is bypassed.
>>
>>Anyway, it's coming soon, and it rocks!!!!
>>
>>All the best,
>>
>>Mike
>
Re: Hall reverb almost done [message #97617 is a reply to message #97616] Sun, 30 March 2008 15:25 Go to previous messageGo to next message
mike audet[3] is currently offline  mike audet[3]
Messages: 88
Registered: June 2008
Member
Ok...the email to your account bounced.

Send me an email at johnwaynefan at hotmail dot com, and I'll reply to it.

All the best!

Mike

"Mike Audet" <mike@..> wrote:
>
>hi Dimitrios,
>
>Thank you for all your feedback and support! I sent you an email with build
>1.4 attached, but I think we've got some email issues for some reason between
>us.
>
>I just sent you a copy of 1.4 from my hotmail account. Let me know if this
>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron Allen
>pointed me in the direction of how to improve it, and deserves a lot of
credit
>for this upgrade.
>
>All the best!
>
>Mike
>
>"Dimitrios" <usurgio@otenet.gr> wrote:
>>
>>Dear Mike,
>>Thanks for what you are doing here for us !!!
>>You know that I donated for the amp some money.
>>I will add some more for the amp nd then for the reverb...or maybe once
>for
>>both when convinient...
>>Regarding the different amp versions I got confused with what is the best
>>!!
>>I tried to make some correstions s to be able to load all three changing
>>the name but what I succeeded with is that I have now three plugins under
>>the same name (could not effectively change that !) and although being
able
>>to audition all I don't know which is what !
>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they can
be
>>inserted that way ?
>>This way I can try all and hear which sounds best to my ears...
>>Thanks again!
>>Dimitrios
>>
>>"Mike Audet" <mike@..> wrote:
>>>
>>>Hi All,
>>>
>>>I just thought I'd let you know that I got one of the two hall algorithms
>>>working this morning. I forgot to implement a rather important control,
>>>but I don't expect it will be difficult to finish. I also have to make
>>the
>>>interface layout work a bit better.
>>>
>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or if
>>it
>>>is an updated version of it. But, it sounds incredibly smooth, full,
and
>>>wide. Just listening to the outputs is awesome. It sounds beautiful
all
>>>by itself. To my ears, it is an improvement over the dp/4 hall, but that
>>>may be because of its 24 bit input and output, or because all the analog
>>>circuitry is bypassed.
>>>
>>>Anyway, it's coming soon, and it rocks!!!!
>>>
>>>All the best,
>>>
>>>Mike
>>
>
Re: Hall reverb almost done [message #97618 is a reply to message #97617] Sun, 30 March 2008 15:46 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Dear Mike,
I got your email with 1.4 amp thanks.
Can you please rename this as Amp3, version 1.3 as Amp2 and 1.2 as amp1 ?
I would like to try all three versions from the update where you have put
an input attenuator...
Thanks !
Dimitrios

"Mike Audet" <mike@..> wrote:
>
>Ok...the email to your account bounced.
>
>Send me an email at johnwaynefan at hotmail dot com, and I'll reply to it.
>
>All the best!
>
>Mike
>
>"Mike Audet" <mike@..> wrote:
>>
>>hi Dimitrios,
>>
>>Thank you for all your feedback and support! I sent you an email with
build
>>1.4 attached, but I think we've got some email issues for some reason between
>>us.
>>
>>I just sent you a copy of 1.4 from my hotmail account. Let me know if
this
>>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron Allen
>>pointed me in the direction of how to improve it, and deserves a lot of
>credit
>>for this upgrade.
>>
>>All the best!
>>
>>Mike
>>
>>"Dimitrios" <usurgio@otenet.gr> wrote:
>>>
>>>Dear Mike,
>>>Thanks for what you are doing here for us !!!
>>>You know that I donated for the amp some money.
>>>I will add some more for the amp nd then for the reverb...or maybe once
>>for
>>>both when convinient...
>>>Regarding the different amp versions I got confused with what is the best
>>>!!
>>>I tried to make some correstions s to be able to load all three changing
>>>the name but what I succeeded with is that I have now three plugins under
>>>the same name (could not effectively change that !) and although being
>able
>>>to audition all I don't know which is what !
>>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they can
>be
>>>inserted that way ?
>>>This way I can try all and hear which sounds best to my ears...
>>>Thanks again!
>>>Dimitrios
>>>
>>>"Mike Audet" <mike@..> wrote:
>>>>
>>>>Hi All,
>>>>
>>>>I just thought I'd let you know that I got one of the two hall algorithms
>>>>working this morning. I forgot to implement a rather important control,
>>>>but I don't expect it will be difficult to finish. I also have to make
>>>the
>>>>interface layout work a bit better.
>>>>
>>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or
if
>>>it
>>>>is an updated version of it. But, it sounds incredibly smooth, full,
>and
>>>>wide. Just listening to the outputs is awesome. It sounds beautiful
>all
>>>>by itself. To my ears, it is an improvement over the dp/4 hall, but
that
>>>>may be because of its 24 bit input and output, or because all the analog
>>>>circuitry is bypassed.
>>>>
>>>>Anyway, it's coming soon, and it rocks!!!!
>>>>
>>>>All the best,
>>>>
>>>>Mike
>>>
>>
>
Re: Hall reverb almost done [message #97619 is a reply to message #97618] Sun, 30 March 2008 15:58 Go to previous messageGo to next message
mike audet[3] is currently offline  mike audet[3]
Messages: 88
Registered: June 2008
Member
Actually, renaming the files is a bit of a job. The esp file has to be renamed,
then several references to it, the gui has to be renamed and changed, etc.,
etc.

If you want to make 1.4 sound like one without the input attenuation, just
place a compressor before it and use the compressor output gain knob to smack
the input on the amp. I much prefer the plugin the way it is.

I will have a killer reverb for you soon, though. :)



"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Dear Mike,
>I got your email with 1.4 amp thanks.
>Can you please rename this as Amp3, version 1.3 as Amp2 and 1.2 as amp1
?
>I would like to try all three versions from the update where you have put
>an input attenuator...
>Thanks !
>Dimitrios
>
>"Mike Audet" <mike@..> wrote:
>>
>>Ok...the email to your account bounced.
>>
>>Send me an email at johnwaynefan at hotmail dot com, and I'll reply to
it.
>>
>>All the best!
>>
>>Mike
>>
>>"Mike Audet" <mike@..> wrote:
>>>
>>>hi Dimitrios,
>>>
>>>Thank you for all your feedback and support! I sent you an email with
>build
>>>1.4 attached, but I think we've got some email issues for some reason
between
>>>us.
>>>
>>>I just sent you a copy of 1.4 from my hotmail account. Let me know if
>this
>>>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron
Allen
>>>pointed me in the direction of how to improve it, and deserves a lot of
>>credit
>>>for this upgrade.
>>>
>>>All the best!
>>>
>>>Mike
>>>
>>>"Dimitrios" <usurgio@otenet.gr> wrote:
>>>>
>>>>Dear Mike,
>>>>Thanks for what you are doing here for us !!!
>>>>You know that I donated for the amp some money.
>>>>I will add some more for the amp nd then for the reverb...or maybe once
>>>for
>>>>both when convinient...
>>>>Regarding the different amp versions I got confused with what is the
best
>>>>!!
>>>>I tried to make some correstions s to be able to load all three changing
>>>>the name but what I succeeded with is that I have now three plugins under
>>>>the same name (could not effectively change that !) and although being
>>able
>>>>to audition all I don't know which is what !
>>>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they can
>>be
>>>>inserted that way ?
>>>>This way I can try all and hear which sounds best to my ears...
>>>>Thanks again!
>>>>Dimitrios
>>>>
>>>>"Mike Audet" <mike@..> wrote:
>>>>>
>>>>>Hi All,
>>>>>
>>>>>I just thought I'd let you know that I got one of the two hall algorithms
>>>>>working this morning. I forgot to implement a rather important control,
>>>>>but I don't expect it will be difficult to finish. I also have to make
>>>>the
>>>>>interface layout work a bit better.
>>>>>
>>>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or
>if
>>>>it
>>>>>is an updated version of it. But, it sounds incredibly smooth, full,
>>and
>>>>>wide. Just listening to the outputs is awesome. It sounds beautiful
>>all
>>>>>by itself. To my ears, it is an improvement over the dp/4 hall, but
>that
>>>>>may be because of its 24 bit input and output, or because all the analog
>>>>>circuitry is bypassed.
>>>>>
>>>>>Anyway, it's coming soon, and it rocks!!!!
>>>>>
>>>>>All the best,
>>>>>
>>>>>Mike
>>>>
>>>
>>
>
Re: Hall reverb almost done [message #97624 is a reply to message #97604] Sun, 30 March 2008 16:29 Go to previous messageGo to next message
Kerry Galloway is currently offline  Kerry Galloway   CANADA
Messages: 56
Registered: December 2008
Member
I hope you don't mind, but I took the liberty of putting your site at
the top of the links at the blog, Mike.

- Kerry

http://ensoniqparis.blogspot.com/
Re: Hall reverb almost done [message #97636 is a reply to message #97624] Sun, 30 March 2008 17:44 Go to previous messageGo to next message
mike audet[3] is currently offline  mike audet[3]
Messages: 88
Registered: June 2008
Member
Thanks so much, Kerry!

Thank you also for working to keep PARIS alive. I look forward to reading
your blog. Let me know if I can help at all.

Cheers!

Mike

Kerry Galloway <kerrygalloway@telus.net> wrote:
>I hope you don't mind, but I took the liberty of putting your site at
>the top of the links at the blog, Mike.
>
>- Kerry
>
>http://ensoniqparis.blogspot.com/
Re: Hall reverb almost done [message #97643 is a reply to message #97636] Sun, 30 March 2008 22:52 Go to previous messageGo to next message
Kerry Galloway is currently offline  Kerry Galloway   CANADA
Messages: 56
Registered: December 2008
Member
You're most welcome.

As mentioned, I left *owning* PARIS years back (and as mentioned am
coming back). But I never left *using* it - I've been "house bassist"
for many years for a tiny PARIS-based studio with a couple of JUNO
nominations and a couple of decent-size acts behind it (Sweatshop Union
and a remix for REM), and they always let me pretty much run my own
sessions and edit my own tracks, so my rudimentary PARIS basics are
fairly current.

However, it's on a Mac (as was my own rig) which ruled out a ton of
developments, so I can't wait to get PARIS installed on a PC rig to
explore more options, including your full range of plug-ins.

Shoot me your email privately if you have a sec.

- Kerry

In article <47f033fd$1@linux>, "Mike Audet" <mike@..> wrote:

> Thanks so much, Kerry!
>
> Thank you also for working to keep PARIS alive. I look forward to reading
> your blog. Let me know if I can help at all.
>
> Cheers!
>
> Mike
>
> Kerry Galloway <kerrygalloway@telus.net> wrote:
> >I hope you don't mind, but I took the liberty of putting your site at
> >the top of the links at the blog, Mike.
> >
> >- Kerry
> >
> >http://ensoniqparis.blogspot.com/
Re: Hall reverb almost done [message #97644 is a reply to message #97603] Sun, 30 March 2008 23:00 Go to previous messageGo to next message
Kerry Galloway is currently offline  Kerry Galloway   CANADA
Messages: 56
Registered: December 2008
Member
Not having my rig yet, I'm not able to check this - are you porting
presets too so the plugs start off with a library?

Or is this a really dumb question? It wouldn't be the first in my life.

- K

In article <47efc24d$1@linux>, "Mike Audet" <mike@..> wrote:

> Hi All,
>
> I just thought I'd let you know that I got one of the two hall algorithms
> working this morning. I forgot to implement a rather important control,
> but I don't expect it will be difficult to finish. I also have to make the
> interface layout work a bit better.
>
> I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or if it
> is an updated version of it. But, it sounds incredibly smooth, full, and
> wide. Just listening to the outputs is awesome. It sounds beautiful all
> by itself. To my ears, it is an improvement over the dp/4 hall, but that
> may be because of its 24 bit input and output, or because all the analog
> circuitry is bypassed.
>
> Anyway, it's coming soon, and it rocks!!!!
>
> All the best,
>
> Mike
Re: Hall reverb almost done [message #97651 is a reply to message #97619] Mon, 31 March 2008 06:43 Go to previous messageGo to next message
rick is currently offline  rick   UNITED STATES
Messages: 1976
Registered: February 2006
Senior Member
the prompt on my computer says...
"the application failed to start because the stock .dll was not found.
reinstalling the application may fix this problem.

i tried adding the line that bill had said to and there was no change.
by the way all the other stock fx run fine.

On 31 Mar 2008 08:58:25 +1000, "Mike Audet" <mike@..> wrote:

>
>Actually, renaming the files is a bit of a job. The esp file has to be renamed,
>then several references to it, the gui has to be renamed and changed, etc.,
>etc.
>
>If you want to make 1.4 sound like one without the input attenuation, just
>place a compressor before it and use the compressor output gain knob to smack
>the input on the amp. I much prefer the plugin the way it is.
>
>I will have a killer reverb for you soon, though. :)
>
>
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>Dear Mike,
>>I got your email with 1.4 amp thanks.
>>Can you please rename this as Amp3, version 1.3 as Amp2 and 1.2 as amp1
>?
>>I would like to try all three versions from the update where you have put
>>an input attenuator...
>>Thanks !
>>Dimitrios
>>
>>"Mike Audet" <mike@..> wrote:
>>>
>>>Ok...the email to your account bounced.
>>>
>>>Send me an email at johnwaynefan at hotmail dot com, and I'll reply to
>it.
>>>
>>>All the best!
>>>
>>>Mike
>>>
>>>"Mike Audet" <mike@..> wrote:
>>>>
>>>>hi Dimitrios,
>>>>
>>>>Thank you for all your feedback and support! I sent you an email with
>>build
>>>>1.4 attached, but I think we've got some email issues for some reason
>between
>>>>us.
>>>>
>>>>I just sent you a copy of 1.4 from my hotmail account. Let me know if
>>this
>>>>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron
>Allen
>>>>pointed me in the direction of how to improve it, and deserves a lot of
>>>credit
>>>>for this upgrade.
>>>>
>>>>All the best!
>>>>
>>>>Mike
>>>>
>>>>"Dimitrios" <usurgio@otenet.gr> wrote:
>>>>>
>>>>>Dear Mike,
>>>>>Thanks for what you are doing here for us !!!
>>>>>You know that I donated for the amp some money.
>>>>>I will add some more for the amp nd then for the reverb...or maybe once
>>>>for
>>>>>both when convinient...
>>>>>Regarding the different amp versions I got confused with what is the
>best
>>>>>!!
>>>>>I tried to make some correstions s to be able to load all three changing
>>>>>the name but what I succeeded with is that I have now three plugins under
>>>>>the same name (could not effectively change that !) and although being
>>>able
>>>>>to audition all I don't know which is what !
>>>>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they can
>>>be
>>>>>inserted that way ?
>>>>>This way I can try all and hear which sounds best to my ears...
>>>>>Thanks again!
>>>>>Dimitrios
>>>>>
>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>
>>>>>>Hi All,
>>>>>>
>>>>>>I just thought I'd let you know that I got one of the two hall algorithms
>>>>>>working this morning. I forgot to implement a rather important control,
>>>>>>but I don't expect it will be difficult to finish. I also have to make
>>>>>the
>>>>>>interface layout work a bit better.
>>>>>>
>>>>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or
>>if
>>>>>it
>>>>>>is an updated version of it. But, it sounds incredibly smooth, full,
>>>and
>>>>>>wide. Just listening to the outputs is awesome. It sounds beautiful
>>>all
>>>>>>by itself. To my ears, it is an improvement over the dp/4 hall, but
>>that
>>>>>>may be because of its 24 bit input and output, or because all the analog
>>>>>>circuitry is bypassed.
>>>>>>
>>>>>>Anyway, it's coming soon, and it rocks!!!!
>>>>>>
>>>>>>All the best,
>>>>>>
>>>>>>Mike
>>>>>
>>>>
>>>
>>
Re: Hall reverb almost done [message #97663 is a reply to message #97603] Mon, 31 March 2008 16:07 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_002B_01C8935A.0E62E100
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I'm ready for a new sweeter Paris verb Mike. Can't wait !
Tom
"Mike Audet" <mike@..> wrote in message news:47efc24d$1@linux...

Hi All,

I just thought I'd let you know that I got one of the two hall =
algorithms
working this morning. I forgot to implement a rather important =
control,
but I don't expect it will be difficult to finish. I also have to =
make the
interface layout work a bit better.

I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or =
if it
is an updated version of it. But, it sounds incredibly smooth, full, =
and
wide. Just listening to the outputs is awesome. It sounds beautiful =
all
by itself. To my ears, it is an improvement over the dp/4 hall, but =
that
may be because of its 24 bit input and output, or because all the =
analog
circuitry is bypassed.

Anyway, it's coming soon, and it rocks!!!!

All the best,

Mike


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_002B_01C8935A.0E62E100
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2180" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I'm ready for a new sweeter Paris verb =
Mike.&nbsp;=20
Can't wait !</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Mike Audet" &lt;mike@..&gt; wrote in message <A=20
=
href=3D"news:47efc24d$1@linux">news:47efc24d$1@linux</A>...</DIV><BR>Hi=20
All,<BR><BR>I just thought I'd let you know that I got one of the two =
hall=20
algorithms<BR>working this morning.&nbsp; I forgot to implement a =
rather=20
important control,<BR>but I don't expect it will be difficult to =
finish.&nbsp;=20
I also have to make the<BR>interface layout work a bit =
better.<BR><BR>I'm not=20
sure if this is a simple esp2 port of the DP/4 Hall algo, or if =
it<BR>is an=20
updated version of it.&nbsp; But, it sounds incredibly smooth, full,=20
and<BR>wide.&nbsp; Just listening to the outputs is awesome.&nbsp; It =
sounds=20
beautiful all<BR>by itself.&nbsp; To my ears, it is an improvement =
over the=20
dp/4 hall, but that<BR>may be because of its 24 bit input and output, =
or=20
because all the analog<BR>circuitry is bypassed.<BR><BR>Anyway, it's =
coming=20
soon, and it rocks!!!!<BR><BR>All the best,<BR><BR>Mike</BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>&nbsp;&nbsp;&nbsp;</FONT></DIV></BODY ></HTML>

------=_NextPart_000_002B_01C8935A.0E62E100--
Re: Hall reverb almost done [message #97666 is a reply to message #97663] Mon, 31 March 2008 17:36 Go to previous messageGo to next message
mike audet[3] is currently offline  mike audet[3]
Messages: 88
Registered: June 2008
Member
It is the sweetest, smoothest reverb I have ever worked with. It sounds pretty
just listening to the reverb returns soloed.

I should have it done by next Monday. If I wasn't so swamped with school
work, I'd have it done already.

There's another hall algo to do after this one, which will be my next task
after this.

Cheers!

Mike



"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>I'm ready for a new sweeter Paris verb Mike. Can't wait !
>Tom
> "Mike Audet" <mike@..> wrote in message news:47efc24d$1@linux...
>
> Hi All,
>
> I just thought I'd let you know that I got one of the two hall =
>algorithms
> working this morning. I forgot to implement a rather important =
>control,
> but I don't expect it will be difficult to finish. I also have to =
>make the
> interface layout work a bit better.
>
> I'm not sure if this is a simple esp2 port of the DP/4 Hall algo, or =
>if it
> is an updated version of it. But, it sounds incredibly smooth, full,
=
>and
> wide. Just listening to the outputs is awesome. It sounds beautiful
=
>all
> by itself. To my ears, it is an improvement over the dp/4 hall, but =
>that
> may be because of its 24 bit input and output, or because all the =
>analog
> circuitry is bypassed.
>
> Anyway, it's coming soon, and it rocks!!!!
>
> All the best,
>
> Mike
>
>
>I choose Polesoft Lockspam to fight spam, and you?
>http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2900.2180" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>I'm ready for a new sweeter Paris verb
=
>Mike. =20
>Can't wait !</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Mike Audet" <mike@..> wrote in message <A=20
> =
>href=3D"news:47efc24d$1@linux">news:47efc24d$1@linux</A>...</DIV><BR>Hi=20
> All,<BR><BR>I just thought I'd let you know that I got one of the two
=
>hall=20
> algorithms<BR>working this morning. I forgot to implement a =
>rather=20
> important control,<BR>but I don't expect it will be difficult to =
>finish. =20
> I also have to make the<BR>interface layout work a bit =
>better.<BR><BR>I'm not=20
> sure if this is a simple esp2 port of the DP/4 Hall algo, or if =
>it<BR>is an=20
> updated version of it. But, it sounds incredibly smooth, full,=20
> and<BR>wide. Just listening to the outputs is awesome. It =
>sounds=20
> beautiful all<BR>by itself. To my ears, it is an improvement =
>over the=20
> dp/4 hall, but that<BR>may be because of its 24 bit input and output,
=
>or=20
> because all the analog<BR>circuitry is bypassed.<BR><BR>Anyway, it's =
>coming=20
> soon, and it rocks!!!!<BR><BR>All the best,<BR><BR>Mike</BLOCKQUOTE>
><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
>and=20
>you?<BR><A=20
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A> </FONT></DIV></BODY></HTML>
>
>
Re: Hall reverb almost done [message #97667 is a reply to message #97651] Mon, 31 March 2008 17:38 Go to previous messageGo to next message
mike audet[3] is currently offline  mike audet[3]
Messages: 88
Registered: June 2008
Member
Hi Rick,

This has to be a path issue. Be absolutely sure that the PARIS plugin folder
is in your system path as described in my install document. This has to
be it.

Good luck!

Mike


rick <parnell68@hotmail.com> wrote:
>the prompt on my computer says...
>"the application failed to start because the stock .dll was not found.
>reinstalling the application may fix this problem.
>
>i tried adding the line that bill had said to and there was no change.
>by the way all the other stock fx run fine.
>
>On 31 Mar 2008 08:58:25 +1000, "Mike Audet" <mike@..> wrote:
>
>>
>>Actually, renaming the files is a bit of a job. The esp file has to be
renamed,
>>then several references to it, the gui has to be renamed and changed, etc.,
>>etc.
>>
>>If you want to make 1.4 sound like one without the input attenuation, just
>>place a compressor before it and use the compressor output gain knob to
smack
>>the input on the amp. I much prefer the plugin the way it is.
>>
>>I will have a killer reverb for you soon, though. :)
>>
>>
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>
>>>Dear Mike,
>>>I got your email with 1.4 amp thanks.
>>>Can you please rename this as Amp3, version 1.3 as Amp2 and 1.2 as amp1
>>?
>>>I would like to try all three versions from the update where you have
put
>>>an input attenuator...
>>>Thanks !
>>>Dimitrios
>>>
>>>"Mike Audet" <mike@..> wrote:
>>>>
>>>>Ok...the email to your account bounced.
>>>>
>>>>Send me an email at johnwaynefan at hotmail dot com, and I'll reply to
>>it.
>>>>
>>>>All the best!
>>>>
>>>>Mike
>>>>
>>>>"Mike Audet" <mike@..> wrote:
>>>>>
>>>>>hi Dimitrios,
>>>>>
>>>>>Thank you for all your feedback and support! I sent you an email with
>>>build
>>>>>1.4 attached, but I think we've got some email issues for some reason
>>between
>>>>>us.
>>>>>
>>>>>I just sent you a copy of 1.4 from my hotmail account. Let me know
if
>>>this
>>>>>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron
>>Allen
>>>>>pointed me in the direction of how to improve it, and deserves a lot
of
>>>>credit
>>>>>for this upgrade.
>>>>>
>>>>>All the best!
>>>>>
>>>>>Mike
>>>>>
>>>>>"Dimitrios" <usurgio@otenet.gr> wrote:
>>>>>>
>>>>>>Dear Mike,
>>>>>>Thanks for what you are doing here for us !!!
>>>>>>You know that I donated for the amp some money.
>>>>>>I will add some more for the amp nd then for the reverb...or maybe
once
>>>>>for
>>>>>>both when convinient...
>>>>>>Regarding the different amp versions I got confused with what is the
>>best
>>>>>>!!
>>>>>>I tried to make some correstions s to be able to load all three changing
>>>>>>the name but what I succeeded with is that I have now three plugins
under
>>>>>>the same name (could not effectively change that !) and although being
>>>>able
>>>>>>to audition all I don't know which is what !
>>>>>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they
can
>>>>be
>>>>>>inserted that way ?
>>>>>>This way I can try all and hear which sounds best to my ears...
>>>>>>Thanks again!
>>>>>>Dimitrios
>>>>>>
>>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>>
>>>>>>>Hi All,
>>>>>>>
>>>>>>>I just thought I'd let you know that I got one of the two hall algorithms
>>>>>>>working this morning. I forgot to implement a rather important control,
>>>>>>>but I don't expect it will be difficult to finish. I also have to
make
>>>>>>the
>>>>>>>interface layout work a bit better.
>>>>>>>
>>>>>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo,
or
>>>if
>>>>>>it
>>>>>>>is an updated version of it. But, it sounds incredibly smooth, full,
>>>>and
>>>>>>>wide. Just listening to the outputs is awesome. It sounds beautiful
>>>>all
>>>>>>>by itself. To my ears, it is an improvement over the dp/4 hall, but
>>>that
>>>>>>>may be because of its 24 bit input and output, or because all the
analog
>>>>>>>circuitry is bypassed.
>>>>>>>
>>>>>>>Anyway, it's coming soon, and it rocks!!!!
>>>>>>>
>>>>>>>All the best,
>>>>>>>
>>>>>>>Mike
>>>>>>
>>>>>
>>>>
>>>
>
Re: Hall reverb almost done [message #97685 is a reply to message #97667] Tue, 01 April 2008 00:15 Go to previous messageGo to next message
erlilo is currently offline  erlilo   DENMARK
Messages: 405
Registered: June 2005
Senior Member
Rick, it's really easy to write something wrong in the system path, so be
sure it is correct as Mike have explained on his homesite. I had the same
problem in the start with the new plugs, untill Mike sent me the correct
writings for the system path.

Good luck

Erling

>
>
> rick <parnell68@hotmail.com> wrote:
>>the prompt on my computer says...
>>"the application failed to start because the stock .dll was not found.
>>reinstalling the application may fix this problem.
>>
>>i tried adding the line that bill had said to and there was no change.
>>by the way all the other stock fx run fine.
>>
>>On 31 Mar 2008 08:58:25 +1000, "Mike Audet" <mike@..> wrote:
>>
>>>
>>>Actually, renaming the files is a bit of a job. The esp file has to be
> renamed,
>>>then several references to it, the gui has to be renamed and changed,
>>>etc.,
>>>etc.
>>>
>>>If you want to make 1.4 sound like one without the input attenuation,
>>>just
>>>place a compressor before it and use the compressor output gain knob to
> smack
>>>the input on the amp. I much prefer the plugin the way it is.
>>>
>>>I will have a killer reverb for you soon, though. :)
>>>
>>>
>>>
>>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>>
>>>>Dear Mike,
>>>>I got your email with 1.4 amp thanks.
>>>>Can you please rename this as Amp3, version 1.3 as Amp2 and 1.2 as amp1
>>>?
>>>>I would like to try all three versions from the update where you have
> put
>>>>an input attenuator...
>>>>Thanks !
>>>>Dimitrios
>>>>
>>>>"Mike Audet" <mike@..> wrote:
>>>>>
>>>>>Ok...the email to your account bounced.
>>>>>
>>>>>Send me an email at johnwaynefan at hotmail dot com, and I'll reply to
>>>it.
>>>>>
>>>>>All the best!
>>>>>
>>>>>Mike
>>>>>
>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>
>>>>>>hi Dimitrios,
>>>>>>
>>>>>>Thank you for all your feedback and support! I sent you an email with
>>>>build
>>>>>>1.4 attached, but I think we've got some email issues for some reason
>>>between
>>>>>>us.
>>>>>>
>>>>>>I just sent you a copy of 1.4 from my hotmail account. Let me know
> if
>>>>this
>>>>>>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron
>>>Allen
>>>>>>pointed me in the direction of how to improve it, and deserves a lot
> of
>>>>>credit
>>>>>>for this upgrade.
>>>>>>
>>>>>>All the best!
>>>>>>
>>>>>>Mike
>>>>>>
>>>>>>"Dimitrios" <usurgio@otenet.gr> wrote:
>>>>>>>
>>>>>>>Dear Mike,
>>>>>>>Thanks for what you are doing here for us !!!
>>>>>>>You know that I donated for the amp some money.
>>>>>>>I will add some more for the amp nd then for the reverb...or maybe
> once
>>>>>>for
>>>>>>>both when convinient...
>>>>>>>Regarding the different amp versions I got confused with what is the
>>>best
>>>>>>>!!
>>>>>>>I tried to make some correstions s to be able to load all three
>>>>>>>changing
>>>>>>>the name but what I succeeded with is that I have now three plugins
> under
>>>>>>>the same name (could not effectively change that !) and although
>>>>>>>being
>>>>>able
>>>>>>>to audition all I don't know which is what !
>>>>>>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they
> can
>>>>>be
>>>>>>>inserted that way ?
>>>>>>>This way I can try all and hear which sounds best to my ears...
>>>>>>>Thanks again!
>>>>>>>Dimitrios
>>>>>>>
>>>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>>>
>>>>>>>>Hi All,
>>>>>>>>
>>>>>>>>I just thought I'd let you know that I got one of the two hall
>>>>>>>>algorithms
>>>>>>>>working this morning. I forgot to implement a rather important
>>>>>>>>control,
>>>>>>>>but I don't expect it will be difficult to finish. I also have to
> make
>>>>>>>the
>>>>>>>>interface layout work a bit better.
>>>>>>>>
>>>>>>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo,
> or
>>>>if
>>>>>>>it
>>>>>>>>is an updated version of it. But, it sounds incredibly smooth,
>>>>>>>>full,
>>>>>and
>>>>>>>>wide. Just listening to the outputs is awesome. It sounds
>>>>>>>>beautiful
>>>>>all
>>>>>>>>by itself. To my ears, it is an improvement over the dp/4 hall, but
>>>>that
>>>>>>>>may be because of its 24 bit input and output, or because all the
> analog
>>>>>>>>circuitry is bypassed.
>>>>>>>>
>>>>>>>>Anyway, it's coming soon, and it rocks!!!!
>>>>>>>>
>>>>>>>>All the best,
>>>>>>>>
>>>>>>>>Mike
>>>>>>>
>>>>>>
>>>>>
>>>>
>>
>
Re: Hall reverb almost done [message #97688 is a reply to message #97667] Tue, 01 April 2008 01:51 Go to previous messageGo to next message
rick is currently offline  rick   UNITED STATES
Messages: 1976
Registered: February 2006
Senior Member
i'll try again after my mri this morning. and just to be sure i'll
post the previous line with the added line. i guess i don't get if
the originals show up with the system32\ensoniq\plugins path yours
don't.

On 1 Apr 2008 10:38:10 +1000, "Mike Audet" <mike@..> wrote:

>
>Hi Rick,
>
>This has to be a path issue. Be absolutely sure that the PARIS plugin folder
>is in your system path as described in my install document. This has to
>be it.
>
>Good luck!
>
>Mike
>
>
>rick <parnell68@hotmail.com> wrote:
>>the prompt on my computer says...
>>"the application failed to start because the stock .dll was not found.
>>reinstalling the application may fix this problem.
>>
>>i tried adding the line that bill had said to and there was no change.
>>by the way all the other stock fx run fine.
>>
>>On 31 Mar 2008 08:58:25 +1000, "Mike Audet" <mike@..> wrote:
>>
>>>
>>>Actually, renaming the files is a bit of a job. The esp file has to be
>renamed,
>>>then several references to it, the gui has to be renamed and changed, etc.,
>>>etc.
>>>
>>>If you want to make 1.4 sound like one without the input attenuation, just
>>>place a compressor before it and use the compressor output gain knob to
>smack
>>>the input on the amp. I much prefer the plugin the way it is.
>>>
>>>I will have a killer reverb for you soon, though. :)
>>>
>>>
>>>
>>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>>
>>>>Dear Mike,
>>>>I got your email with 1.4 amp thanks.
>>>>Can you please rename this as Amp3, version 1.3 as Amp2 and 1.2 as amp1
>>>?
>>>>I would like to try all three versions from the update where you have
>put
>>>>an input attenuator...
>>>>Thanks !
>>>>Dimitrios
>>>>
>>>>"Mike Audet" <mike@..> wrote:
>>>>>
>>>>>Ok...the email to your account bounced.
>>>>>
>>>>>Send me an email at johnwaynefan at hotmail dot com, and I'll reply to
>>>it.
>>>>>
>>>>>All the best!
>>>>>
>>>>>Mike
>>>>>
>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>
>>>>>>hi Dimitrios,
>>>>>>
>>>>>>Thank you for all your feedback and support! I sent you an email with
>>>>build
>>>>>>1.4 attached, but I think we've got some email issues for some reason
>>>between
>>>>>>us.
>>>>>>
>>>>>>I just sent you a copy of 1.4 from my hotmail account. Let me know
>if
>>>>this
>>>>>>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron
>>>Allen
>>>>>>pointed me in the direction of how to improve it, and deserves a lot
>of
>>>>>credit
>>>>>>for this upgrade.
>>>>>>
>>>>>>All the best!
>>>>>>
>>>>>>Mike
>>>>>>
>>>>>>"Dimitrios" <usurgio@otenet.gr> wrote:
>>>>>>>
>>>>>>>Dear Mike,
>>>>>>>Thanks for what you are doing here for us !!!
>>>>>>>You know that I donated for the amp some money.
>>>>>>>I will add some more for the amp nd then for the reverb...or maybe
>once
>>>>>>for
>>>>>>>both when convinient...
>>>>>>>Regarding the different amp versions I got confused with what is the
>>>best
>>>>>>>!!
>>>>>>>I tried to make some correstions s to be able to load all three changing
>>>>>>>the name but what I succeeded with is that I have now three plugins
>under
>>>>>>>the same name (could not effectively change that !) and although being
>>>>>able
>>>>>>>to audition all I don't know which is what !
>>>>>>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they
>can
>>>>>be
>>>>>>>inserted that way ?
>>>>>>>This way I can try all and hear which sounds best to my ears...
>>>>>>>Thanks again!
>>>>>>>Dimitrios
>>>>>>>
>>>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>>>
>>>>>>>>Hi All,
>>>>>>>>
>>>>>>>>I just thought I'd let you know that I got one of the two hall algorithms
>>>>>>>>working this morning. I forgot to implement a rather important control,
>>>>>>>>but I don't expect it will be difficult to finish. I also have to
>make
>>>>>>>the
>>>>>>>>interface layout work a bit better.
>>>>>>>>
>>>>>>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo,
>or
>>>>if
>>>>>>>it
>>>>>>>>is an updated version of it. But, it sounds incredibly smooth, full,
>>>>>and
>>>>>>>>wide. Just listening to the outputs is awesome. It sounds beautiful
>>>>>all
>>>>>>>>by itself. To my ears, it is an improvement over the dp/4 hall, but
>>>>that
>>>>>>>>may be because of its 24 bit input and output, or because all the
>analog
>>>>>>>>circuitry is bypassed.
>>>>>>>>
>>>>>>>>Anyway, it's coming soon, and it rocks!!!!
>>>>>>>>
>>>>>>>>All the best,
>>>>>>>>
>>>>>>>>Mike
>>>>>>>
>>>>>>
>>>>>
>>>>
>>
Re: Hall reverb almost done [message #97691 is a reply to message #97688] Tue, 01 April 2008 03:34 Go to previous messageGo to next message
mike audet[3] is currently offline  mike audet[3]
Messages: 88
Registered: June 2008
Member
Hi Rick,

I can't be sure, but I think someone hard coded "system\ensoniq\plugins"
into the code that loads additional plugins. I'm actually a bit curious
if copying the entire Ensoniq foder into the system folder would solve this
problem just as well as the path statement.

Or, it could have nothing to do with that. But, the path trick works.

Good luck!

Mike

rick <parnell68@hotmail.com> wrote:
>i'll try again after my mri this morning. and just to be sure i'll
>post the previous line with the added line. i guess i don't get if
>the originals show up with the system32\ensoniq\plugins path yours
>don't.
>
>On 1 Apr 2008 10:38:10 +1000, "Mike Audet" <mike@..> wrote:
>
>>
>>Hi Rick,
>>
>>This has to be a path issue. Be absolutely sure that the PARIS plugin
folder
>>is in your system path as described in my install document. This has to
>>be it.
>>
>>Good luck!
>>
>>Mike
>>
>>
>>rick <parnell68@hotmail.com> wrote:
>>>the prompt on my computer says...
>>>"the application failed to start because the stock .dll was not found.
>>>reinstalling the application may fix this problem.
>>>
>>>i tried adding the line that bill had said to and there was no change.
>>>by the way all the other stock fx run fine.
>>>
>>>On 31 Mar 2008 08:58:25 +1000, "Mike Audet" <mike@..> wrote:
>>>
>>>>
>>>>Actually, renaming the files is a bit of a job. The esp file has to
be
>>renamed,
>>>>then several references to it, the gui has to be renamed and changed,
etc.,
>>>>etc.
>>>>
>>>>If you want to make 1.4 sound like one without the input attenuation,
just
>>>>place a compressor before it and use the compressor output gain knob
to
>>smack
>>>>the input on the amp. I much prefer the plugin the way it is.
>>>>
>>>>I will have a killer reverb for you soon, though. :)
>>>>
>>>>
>>>>
>>>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>>>
>>>>>Dear Mike,
>>>>>I got your email with 1.4 amp thanks.
>>>>>Can you please rename this as Amp3, version 1.3 as Amp2 and 1.2 as amp1
>>>>?
>>>>>I would like to try all three versions from the update where you have
>>put
>>>>>an input attenuator...
>>>>>Thanks !
>>>>>Dimitrios
>>>>>
>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>
>>>>>>Ok...the email to your account bounced.
>>>>>>
>>>>>>Send me an email at johnwaynefan at hotmail dot com, and I'll reply
to
>>>>it.
>>>>>>
>>>>>>All the best!
>>>>>>
>>>>>>Mike
>>>>>>
>>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>>
>>>>>>>hi Dimitrios,
>>>>>>>
>>>>>>>Thank you for all your feedback and support! I sent you an email
with
>>>>>build
>>>>>>>1.4 attached, but I think we've got some email issues for some reason
>>>>between
>>>>>>>us.
>>>>>>>
>>>>>>>I just sent you a copy of 1.4 from my hotmail account. Let me know
>>if
>>>>>this
>>>>>>>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron
>>>>Allen
>>>>>>>pointed me in the direction of how to improve it, and deserves a lot
>>of
>>>>>>credit
>>>>>>>for this upgrade.
>>>>>>>
>>>>>>>All the best!
>>>>>>>
>>>>>>>Mike
>>>>>>>
>>>>>>>"Dimitrios" <usurgio@otenet.gr> wrote:
>>>>>>>>
>>>>>>>>Dear Mike,
>>>>>>>>Thanks for what you are doing here for us !!!
>>>>>>>>You know that I donated for the amp some money.
>>>>>>>>I will add some more for the amp nd then for the reverb...or maybe
>>once
>>>>>>>for
>>>>>>>>both when convinient...
>>>>>>>>Regarding the different amp versions I got confused with what is
the
>>>>best
>>>>>>>>!!
>>>>>>>>I tried to make some correstions s to be able to load all three changing
>>>>>>>>the name but what I succeeded with is that I have now three plugins
>>under
>>>>>>>>the same name (could not effectively change that !) and although
being
>>>>>>able
>>>>>>>>to audition all I don't know which is what !
>>>>>>>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they
>>can
>>>>>>be
>>>>>>>>inserted that way ?
>>>>>>>>This way I can try all and hear which sounds best to my ears...
>>>>>>>>Thanks again!
>>>>>>>>Dimitrios
>>>>>>>>
>>>>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>>>>
>>>>>>>>>Hi All,
>>>>>>>>>
>>>>>>>>>I just thought I'd let you know that I got one of the two hall algorithms
>>>>>>>>>working this morning. I forgot to implement a rather important
control,
>>>>>>>>>but I don't expect it will be difficult to finish. I also have
to
>>make
>>>>>>>>the
>>>>>>>>>interface layout work a bit better.
>>>>>>>>>
>>>>>>>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo,
>>or
>>>>>if
>>>>>>>>it
>>>>>>>>>is an updated version of it. But, it sounds incredibly smooth,
full,
>>>>>>and
>>>>>>>>>wide. Just listening to the outputs is awesome. It sounds beautiful
>>>>>>all
>>>>>>>>>by itself. To my ears, it is an improvement over the dp/4 hall,
but
>>>>>that
>>>>>>>>>may be because of its 24 bit input and output, or because all the
>>analog
>>>>>>>>>circuitry is bypassed.
>>>>>>>>>
>>>>>>>>>Anyway, it's coming soon, and it rocks!!!!
>>>>>>>>>
>>>>>>>>>All the best,
>>>>>>>>>
>>>>>>>>>Mike
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>
>
Re: Hall reverb almost done [message #97698 is a reply to message #97691] Tue, 01 April 2008 07:36 Go to previous message
rick is currently offline  rick   UNITED STATES
Messages: 1976
Registered: February 2006
Senior Member
mike,

got it sussed out today. i deleted the entire previous entries and
started from scratch...works fine now...thanks. can't wait for aunty
m to pass so i can send you some more worthless american money for
your plugs.

;o)

On 1 Apr 2008 20:34:31 +1000, "Mike Audet" <mike@..> wrote:

>
>Hi Rick,
>
>I can't be sure, but I think someone hard coded "system\ensoniq\plugins"
>into the code that loads additional plugins. I'm actually a bit curious
>if copying the entire Ensoniq foder into the system folder would solve this
>problem just as well as the path statement.
>
>Or, it could have nothing to do with that. But, the path trick works.
>
>Good luck!
>
>Mike
>
>rick <parnell68@hotmail.com> wrote:
>>i'll try again after my mri this morning. and just to be sure i'll
>>post the previous line with the added line. i guess i don't get if
>>the originals show up with the system32\ensoniq\plugins path yours
>>don't.
>>
>>On 1 Apr 2008 10:38:10 +1000, "Mike Audet" <mike@..> wrote:
>>
>>>
>>>Hi Rick,
>>>
>>>This has to be a path issue. Be absolutely sure that the PARIS plugin
>folder
>>>is in your system path as described in my install document. This has to
>>>be it.
>>>
>>>Good luck!
>>>
>>>Mike
>>>
>>>
>>>rick <parnell68@hotmail.com> wrote:
>>>>the prompt on my computer says...
>>>>"the application failed to start because the stock .dll was not found.
>>>>reinstalling the application may fix this problem.
>>>>
>>>>i tried adding the line that bill had said to and there was no change.
>>>>by the way all the other stock fx run fine.
>>>>
>>>>On 31 Mar 2008 08:58:25 +1000, "Mike Audet" <mike@..> wrote:
>>>>
>>>>>
>>>>>Actually, renaming the files is a bit of a job. The esp file has to
>be
>>>renamed,
>>>>>then several references to it, the gui has to be renamed and changed,
>etc.,
>>>>>etc.
>>>>>
>>>>>If you want to make 1.4 sound like one without the input attenuation,
>just
>>>>>place a compressor before it and use the compressor output gain knob
>to
>>>smack
>>>>>the input on the amp. I much prefer the plugin the way it is.
>>>>>
>>>>>I will have a killer reverb for you soon, though. :)
>>>>>
>>>>>
>>>>>
>>>>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>>>>
>>>>>>Dear Mike,
>>>>>>I got your email with 1.4 amp thanks.
>>>>>>Can you please rename this as Amp3, version 1.3 as Amp2 and 1.2 as amp1
>>>>>?
>>>>>>I would like to try all three versions from the update where you have
>>>put
>>>>>>an input attenuator...
>>>>>>Thanks !
>>>>>>Dimitrios
>>>>>>
>>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>>
>>>>>>>Ok...the email to your account bounced.
>>>>>>>
>>>>>>>Send me an email at johnwaynefan at hotmail dot com, and I'll reply
>to
>>>>>it.
>>>>>>>
>>>>>>>All the best!
>>>>>>>
>>>>>>>Mike
>>>>>>>
>>>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>>>
>>>>>>>>hi Dimitrios,
>>>>>>>>
>>>>>>>>Thank you for all your feedback and support! I sent you an email
>with
>>>>>>build
>>>>>>>>1.4 attached, but I think we've got some email issues for some reason
>>>>>between
>>>>>>>>us.
>>>>>>>>
>>>>>>>>I just sent you a copy of 1.4 from my hotmail account. Let me know
>>>if
>>>>>>this
>>>>>>>>doesn't arrive. 1.4 includes a much better cabinet simulator. Aaron
>>>>>Allen
>>>>>>>>pointed me in the direction of how to improve it, and deserves a lot
>>>of
>>>>>>>credit
>>>>>>>>for this upgrade.
>>>>>>>>
>>>>>>>>All the best!
>>>>>>>>
>>>>>>>>Mike
>>>>>>>>
>>>>>>>>"Dimitrios" <usurgio@otenet.gr> wrote:
>>>>>>>>>
>>>>>>>>>Dear Mike,
>>>>>>>>>Thanks for what you are doing here for us !!!
>>>>>>>>>You know that I donated for the amp some money.
>>>>>>>>>I will add some more for the amp nd then for the reverb...or maybe
>>>once
>>>>>>>>for
>>>>>>>>>both when convinient...
>>>>>>>>>Regarding the different amp versions I got confused with what is
>the
>>>>>best
>>>>>>>>>!!
>>>>>>>>>I tried to make some correstions s to be able to load all three changing
>>>>>>>>>the name but what I succeeded with is that I have now three plugins
>>>under
>>>>>>>>>the same name (could not effectively change that !) and although
>being
>>>>>>>able
>>>>>>>>>to audition all I don't know which is what !
>>>>>>>>>Can you please rename the amps as Amp1, Amp2 and Amp3 so that they
>>>can
>>>>>>>be
>>>>>>>>>inserted that way ?
>>>>>>>>>This way I can try all and hear which sounds best to my ears...
>>>>>>>>>Thanks again!
>>>>>>>>>Dimitrios
>>>>>>>>>
>>>>>>>>>"Mike Audet" <mike@..> wrote:
>>>>>>>>>>
>>>>>>>>>>Hi All,
>>>>>>>>>>
>>>>>>>>>>I just thought I'd let you know that I got one of the two hall algorithms
>>>>>>>>>>working this morning. I forgot to implement a rather important
>control,
>>>>>>>>>>but I don't expect it will be difficult to finish. I also have
>to
>>>make
>>>>>>>>>the
>>>>>>>>>>interface layout work a bit better.
>>>>>>>>>>
>>>>>>>>>>I'm not sure if this is a simple esp2 port of the DP/4 Hall algo,
>>>or
>>>>>>if
>>>>>>>>>it
>>>>>>>>>>is an updated version of it. But, it sounds incredibly smooth,
>full,
>>>>>>>and
>>>>>>>>>>wide. Just listening to the outputs is awesome. It sounds beautiful
>>>>>>>all
>>>>>>>>>>by itself. To my ears, it is an improvement over the dp/4 hall,
>but
>>>>>>that
>>>>>>>>>>may be because of its 24 bit input and output, or because all the
>>>analog
>>>>>>>>>>circuitry is bypassed.
>>>>>>>>>>
>>>>>>>>>>Anyway, it's coming soon, and it rocks!!!!
>>>>>>>>>>
>>>>>>>>>>All the best,
>>>>>>>>>>
>>>>>>>>>>Mike
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>
Previous Topic: Hey Deej....
Next Topic: ATN Mike Audet: plug-in ideas
Goto Forum:
  


Current Time: Tue Dec 24 18:29:41 PST 2024

Total time taken to generate the page: 0.03334 seconds