The PARIS Forums: PARIS: Main » Another little project

Home » The PARIS Forums » PARIS: Main » Another little project (The MECGyver)

Show: Today's Messages :: Polls :: Message Navigator

Another little project [message #106307]

Fri, 22 April 2011 19:11

Jim Drago[2]

Messages: 102
Registered: December 2008

Senior Member

I needed a mental challenge to help deal with some personal issues and have been needing to save some room so decided to combine one of my MEC's and it's computer. Here's where I'm at. My CPU came today (AMD Phenom II x2 @ 3.2) and I should have RAM soon and then can finish up. No permanent mods to MEC it can be reconfigured to completely stock in 20 or so minutes. PS DVD and HD mounted to inner roof. Gigabyte MB to floor n a modified chassis from another computer. This configuration will give me 2 PCI slots for EDS cards and leave room for 2 MEC modules. Hope it all works. Because of the length of our beloved EDS cards I had to extend and box in part of the back of the MEC. More pics after I finish later next week. The keyboard project I built has ADAT out and with an ADAT MEC module it should be sweet. Here's the thread on that build. Let me know if the more experienced among you foresee any possible pitfalls.

http://kerrygalloway.com/ParisForums/index.php?t=msg&th= 15086&start=0&

index.php?t=getfile&id=764&private=0

Attachment: MecGyver.jpg
(Size: 804.52KB, Downloaded 478 times)

[Updated on: Fri, 22 April 2011 19:28]

Report message to a moderator

Re: Another little project [message #106336 is a reply to message #106307]

Tue, 26 April 2011 04:56

mani1147

Messages: 130
Registered: May 2009
Location: NB Canada

Senior Member

Wow, this is ultra cool Jim, do keep us posted. I'm always in for some good DIY projects. Here's my latest, trying to tame the severe heat coming from my ISA428 preamp after adding the D/A card.
Added a bigger heatsink with fan, new thermal compound and lifted the top cover but its back on the bench today. No turning back now, its a machined hole on the top cover for a 4" quiet fan.

Man, this was a bad design by Focusrite, bet ya that's one of the main reasons why all the newer models have a switching pwr supply instead of linear.

Cheers
Rob

index.php?t=getfile&id=769&private=0

Attachment: Picture 083.jpg
(Size: 47.42KB, Downloaded 432 times)

Report message to a moderator

Re: Another little project [message #106349 is a reply to message #106336]

Wed, 27 April 2011 07:48

mani1147

Messages: 130
Registered: May 2009
Location: NB Canada

Senior Member

Update: Took the fan off the heatsink, added a 4" fan on the top cover and lowered the fan V to 8VDC, much better and quieter.

index.php?t=getfile&id=770&private=0

Attachment: Picture 022.jpg
(Size: 57.85KB, Downloaded 395 times)

Report message to a moderator

Re: Another little project [message #106351 is a reply to message #106349]

Wed, 27 April 2011 09:07

Jim Drago[2]

Messages: 102
Registered: December 2008

Senior Member

Awesome. I've never owned a focusrite so was not aware of the problem. I completed the OS install last night. I went with 7 32. I will be installing PARIS shortly and will post results.

Report message to a moderator

Previous Topic:	Conversion from Pro Tools to Paris
Next Topic:	Setting up a 2 Mec system

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 11:19:50 PST 2024

Total time taken to generate the page: 0.04435 seconds