Home » The PARIS Forums » PARIS: Main » HELP!!!!
| HELP!!!! [message #70538] |
Tue, 25 July 2006 21:14  |
Tyrone Corbett
Messages: 253
Registered: August 2006
|
Senior Member |
|
|
Guys, I've got some major problems and could use some serious advice.
System
Win98se
512 Ram
Asus 8n8x motherboard
Asus 9600se dual head video PCI card
OS drive
Audio drive
Paris 3.0 3 card system
I recently added a Magma Chassis. Successfully moved all three cards to chassis
without incident. Paris works without flaw.
I then added a new Memorex CD/DVD burner. System looked good until I attempted
the first CD burn. Though the cd burned, I crashed and received the following
error:
0028:c004d8c5 in vxd vfat(01) + 0000b8ed
0028:c1c2f4c0 in VXD voltrack(04) + 00000430
I removed the connection to the MEC and Magma chassis to no avail. I googled
it, but could not make head nor tales of the problem, so after several hours,
I removed the Memorex drive, then reinstalled the original CD writer. Though
I did not receive the "voltrack" error anymore, I could only read the "Nero"
software installation cd. When I attempt to read ANY other cd the system
locks up.
I entered "Safe mode" to see if I could find resolution there, then I received:
"There is a problem with your display settings. The adaptor type is incorrect
or the current settings do not work with your hardware."
At this point, the system no longer goes into "Safe mode", nor shows the
IRQ screen....it simply freezes until I do a 'hard" reset. I can force my
way into "Safe mode" at boot up, but it does not show any specific details
regarding my Asus adaptor, only the generic monitor settings.
Any and ALL assistance appreciated!!!
Tyrone
|
|
|
|
| Re: HELP!!!! [message #70539 is a reply to message #70538] |
Tue, 25 July 2006 21:21  |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
Tyrone,
970-375-7081
Deej
"Tyrone Corbett" <tyronecorbett@comcast.net> wrote in message
news:44c6ec2d$1@linux...
>
> Guys, I've got some major problems and could use some serious advice.
>
> System
>
> Win98se
> 512 Ram
> Asus 8n8x motherboard
> Asus 9600se dual head video PCI card
> OS drive
> Audio drive
> Paris 3.0 3 card system
>
> I recently added a Magma Chassis. Successfully moved all three cards to
chassis
> without incident. Paris works without flaw.
>
> I then added a new Memorex CD/DVD burner. System looked good until I
attempted
> the first CD burn. Though the cd burned, I crashed and received the
following
> error:
>
> 0028:c004d8c5 in vxd vfat(01) + 0000b8ed
> 0028:c1c2f4c0 in VXD voltrack(04) + 00000430
>
> I removed the connection to the MEC and Magma chassis to no avail. I
googled
> it, but could not make head nor tales of the problem, so after several
hours,
> I removed the Memorex drive, then reinstalled the original CD writer.
Though
> I did not receive the "voltrack" error anymore, I could only read the
"Nero"
> software installation cd. When I attempt to read ANY other cd the system
> locks up.
>
> I entered "Safe mode" to see if I could find resolution there, then I
received:
>
>
> "There is a problem with your display settings. The adaptor type is
incorrect
> or the current settings do not work with your hardware."
>
> At this point, the system no longer goes into "Safe mode", nor shows the
> IRQ screen....it simply freezes until I do a 'hard" reset. I can force my
> way into "Safe mode" at boot up, but it does not show any specific details
> regarding my Asus adaptor, only the generic monitor settings.
>
> Any and ALL assistance appreciated!!!
>
> Tyrone
>
|
|
|
|
|
|
|
|
|
|
| Re: HELP!!!! [message #70667 is a reply to message #70662] |
Sat, 29 July 2006 06:04 |
Nei
Messages: 108
Registered: November 2006
|
Senior Member |
|
|
I have a Memorex CD/DVD reader/burner (external USB-type), and
I've had no problems with it, works fine, etc. The only
weirdness is that Cubase can't see it - was trying to import a
song from a client's CD for a tempo reference, and it just
wouldn't see the player - wasn't the CD, as I checked it with
another CD, as well. I have a feeling this is some kind of
driver weirdness, though, as I've had various driver issues
with this mobo. Everything else on the computer sees the drive
(Windows Media Player, Nero), just not Cubase.
Also, had to pull some samples off a CD-R for a band I had done
a demo for recently, it was just a regular CD-R with wav files
on it, and Cubase couldn't see the drive in that case, either...
had to just do a straight copy & paste into the audio folder
for that project, then import the files from there - no big
deal, but kind of stupid I couldn't do it straight from the app.
So either it's a driver thing or a Cbuase thing - not sure
which. The drive itself is fine & works great - sorry to hear
you guys are having issues with your Memorexes ( or is it
"Memorices"? Memorexi"?).
Neil
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>I've got a Memorex USB CD burner on my Cubase rig. It sorta sucks actually,
>sometimes hanging at boot. I'm getting ready to lose it because I never
use
>it and I need the USB port it's using for the KORE system that just arrived
>today. These things are being blown out really cheap at Office Depot. Now
>it's pretty obvious why I guess.
>
>Deej
>
>"Ed" <askme@email.com> wrote in message news:44caaaac@linux...
>> I had a Memorex DVD burner too... it was the pits! I had a ghost of my
>> system, but it wouldn't work either. I replaced just about everything
in
>> the system, come to find out that IT was the culprit... NEVER again will
I
>> buy their products!
>>
>>
>>
>> "Tyrone Corbett" <tyronecorbett@comcast.net> wrote in message
>> news:44c7f6eb$1@linux...
>> >
>> > Deej, many thanks for your willingness to assist, but after a long (and
>I
>> > do mean long) and hard fought 24 hour battle, I have prevailed. The
>cause
>> > of all of my problems was the Memorex DVD/CD burner I installed. It
>really
>> > freaked my entire system out! Even after removing it, I found that it
>had
>> > corrupted my video driver files as well as having caused a host of other
>> > issues.
>> >
>> > I have not "ghosted" my C:\ drive...scary thought...getting on that
>after
>> > I return from LA.
>> >
>> > Thanks again!
>> >
>> > Tyrone
>>
>>
>
>
|
|
|
|
| Re: HELP!!!! [message #70668 is a reply to message #70667] |
Sat, 29 July 2006 07:06 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
My system won't recognize a CD in the Memorex unless the CD is inserted at
boot up. Wavelab deoesn't see it at all. There's probably a patch for WL
though.....maybe for Cubase as well on the Steiny website........maybe?
"Neil" <OIUOI@OIU.com> wrote in message news:44cb5cce$1@linux...
>
> I have a Memorex CD/DVD reader/burner (external USB-type), and
> I've had no problems with it, works fine, etc. The only
> weirdness is that Cubase can't see it - was trying to import a
> song from a client's CD for a tempo reference, and it just
> wouldn't see the player - wasn't the CD, as I checked it with
> another CD, as well. I have a feeling this is some kind of
> driver weirdness, though, as I've had various driver issues
> with this mobo. Everything else on the computer sees the drive
> (Windows Media Player, Nero), just not Cubase.
>
> Also, had to pull some samples off a CD-R for a band I had done
> a demo for recently, it was just a regular CD-R with wav files
> on it, and Cubase couldn't see the drive in that case, either...
> had to just do a straight copy & paste into the audio folder
> for that project, then import the files from there - no big
> deal, but kind of stupid I couldn't do it straight from the app.
>
> So either it's a driver thing or a Cbuase thing - not sure
> which. The drive itself is fine & works great - sorry to hear
> you guys are having issues with your Memorexes ( or is it
> "Memorices"? Memorexi"?).
>
> Neil
>
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >I've got a Memorex USB CD burner on my Cubase rig. It sorta sucks
actually,
> >sometimes hanging at boot. I'm getting ready to lose it because I never
> use
> >it and I need the USB port it's using for the KORE system that just
arrived
> >today. These things are being blown out really cheap at Office Depot. Now
> >it's pretty obvious why I guess.
> >
> >Deej
> >
> >"Ed" <askme@email.com> wrote in message news:44caaaac@linux...
> >> I had a Memorex DVD burner too... it was the pits! I had a ghost of my
> >> system, but it wouldn't work either. I replaced just about everything
> in
> >> the system, come to find out that IT was the culprit... NEVER again
will
> I
> >> buy their products!
> >>
> >>
> >>
> >> "Tyrone Corbett" <tyronecorbett@comcast.net> wrote in message
> >> news:44c7f6eb$1@linux...
> >> >
> >> > Deej, many thanks for your willingness to assist, but after a long
(and
> >I
> >> > do mean long) and hard fought 24 hour battle, I have prevailed. The
> >cause
> >> > of all of my problems was the Memorex DVD/CD burner I installed. It
> >really
> >> > freaked my entire system out! Even after removing it, I found that it
> >had
> >> > corrupted my video driver files as well as having caused a host of
other
> >> > issues.
> >> >
> >> > I have not "ghosted" my C:\ drive...scary thought...getting on that
> >after
> >> > I return from LA.
> >> >
> >> > Thanks again!
> >> >
> >> > Tyrone
> >>
> >>
> >
> >
>
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Sun Dec 01 20:58:22 PST 2024
Total time taken to generate the page: 0.02071 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
