Home » The PARIS Forums » PARIS: Main » Bounce to disk issue
|
|
|
Re: Bounce to disk issue [message #97701 is a reply to message #97662] |
Tue, 01 April 2008 10:57 |
Miguel Vigil [1]
Messages: 258 Registered: July 2005
|
Senior Member |
|
|
Nope... I tried that early on, and that doesn't work either. I found out that
clicking record in the transport window, rather than using the CS transport
controls works fine, so that's what I do now.
I guess it must be something in the CS interface, I dunno. Thanks for the
input never the less...
BT
EK Sound <ask_me@nospam.net> wrote:
>That happened because you pressed play first... hold record down THEN
>press play... the dialog box will pop up first then the bounce will
>start once the name is entered. Also, allow for at least 2 seconds of
>dead air from where you have the now line set or you will clip off the
>front of the bounce.
>
>David.
>
>Bill T wrote:
>> Anybody else seen this prob with 3.0 on Windows XP? When doing a bounce
to
>> disk, I get the dialog box asking for filename, but meanwhile the bounce
>> has already started and the tracks are playing.
>>
>> I'd swear that it just started doing this, and for some reason, it seems
>> that the first time you do a bounce in a project it waits for the name
before
>> beginning the bounce. As it is now, I just have to leave enough 'roll
time'
>> ahead of the tracks to give me time to type in a filename. Not an ideal
solution...
>>
>> Any ideas?
|
|
|
Re: Bounce to disk issue [message #97722 is a reply to message #97701] |
Wed, 02 April 2008 09:07 |
Sandy Tipping
Messages: 54 Registered: June 2007
|
Member |
|
|
This has happend randomly for as long as I've used Paris, and I'm using
WinME (since about 2000).
I do find that being very deliberate about record and then play (leaving at
least half a second between rec and play) solves this most of the time.
It seems to be at it's worst when I'm in a hurry to send a rough mix - stop,
select last recorded, delete files, start again.
S
"Bill T" <nospam@nospam.com> wrote in message news:47f27798$1@linux...
>
> Nope... I tried that early on, and that doesn't work either. I found out
> that
> clicking record in the transport window, rather than using the CS
> transport
> controls works fine, so that's what I do now.
>
> I guess it must be something in the CS interface, I dunno. Thanks for the
> input never the less...
> BT
>
> EK Sound <ask_me@nospam.net> wrote:
>>That happened because you pressed play first... hold record down THEN
>>press play... the dialog box will pop up first then the bounce will
>>start once the name is entered. Also, allow for at least 2 seconds of
>>dead air from where you have the now line set or you will clip off the
>>front of the bounce.
>>
>>David.
>>
>>Bill T wrote:
>>> Anybody else seen this prob with 3.0 on Windows XP? When doing a bounce
> to
>>> disk, I get the dialog box asking for filename, but meanwhile the bounce
>>> has already started and the tracks are playing.
>>>
>>> I'd swear that it just started doing this, and for some reason, it seems
>>> that the first time you do a bounce in a project it waits for the name
> before
>>> beginning the bounce. As it is now, I just have to leave enough 'roll
> time'
>>> ahead of the tracks to give me time to type in a filename. Not an ideal
> solution...
>>>
>>> Any ideas?
>
|
|
|
Re: Bounce to disk issue [message #97820 is a reply to message #97722] |
Mon, 07 April 2008 15:00 |
Miguel Vigil [1]
Messages: 258 Registered: July 2005
|
Senior Member |
|
|
Glad(?) to hear it's not just my rig I guess. But I know the drill well; stop,
select last recorded files, delete.... I'll try the method you use and see
if it works.
"Sandy Tipping" <tippsand@earthling.net> wrote:
>This has happend randomly for as long as I've used Paris, and I'm using
>WinME (since about 2000).
>
>I do find that being very deliberate about record and then play (leaving
at
>least half a second between rec and play) solves this most of the time.
>
>It seems to be at it's worst when I'm in a hurry to send a rough mix - stop,
>select last recorded, delete files, start again.
>
>S
>
>
>"Bill T" <nospam@nospam.com> wrote in message news:47f27798$1@linux...
>>
>> Nope... I tried that early on, and that doesn't work either. I found out
>> that
>> clicking record in the transport window, rather than using the CS
>> transport
>> controls works fine, so that's what I do now.
>>
>> I guess it must be something in the CS interface, I dunno. Thanks for
the
>> input never the less...
>> BT
>>
>> EK Sound <ask_me@nospam.net> wrote:
>>>That happened because you pressed play first... hold record down THEN
>>>press play... the dialog box will pop up first then the bounce will
>>>start once the name is entered. Also, allow for at least 2 seconds of
>>>dead air from where you have the now line set or you will clip off the
>>>front of the bounce.
>>>
>>>David.
>>>
>>>Bill T wrote:
>>>> Anybody else seen this prob with 3.0 on Windows XP? When doing a bounce
>> to
>>>> disk, I get the dialog box asking for filename, but meanwhile the bounce
>>>> has already started and the tracks are playing.
>>>>
>>>> I'd swear that it just started doing this, and for some reason, it seems
>>>> that the first time you do a bounce in a project it waits for the name
>> before
>>>> beginning the bounce. As it is now, I just have to leave enough 'roll
>> time'
>>>> ahead of the tracks to give me time to type in a filename. Not an ideal
>> solution...
>>>>
>>>> Any ideas?
>>
>
>
|
|
|
Goto Forum:
Current Time: Mon Dec 16 18:44:20 PST 2024
Total time taken to generate the page: 0.01107 seconds
|