The PARIS Forums: PARIS: Main » Paris-> Dakota Frontier-> CEPro / Wavelab 4

Home » The PARIS Forums » PARIS: Main » Paris-> Dakota Frontier-> CEPro / Wavelab 4

Show: Today's Messages :: Polls :: Message Navigator

Paris-> Dakota Frontier-> CEPro / Wavelab 4 [message #63883]

Sat, 28 January 2006 09:23

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

HI All

Well after a year and a half I finally got my second rig up and running and
am going to attempt to get Paris and CEPro 1.2 / Wavelab 4.0 synced.

I have SPDIF / ADAT and Light pipe all wired up and have audio playback from
both CEP and Wavelab happening in Paris....now it's time to attemp syncing
the second rig to Paris and then eventually Paris to the second rig.

So the big question is where do I start.

DOn

Report message to a moderator

Re: Paris-> Dakota Frontier-> CEPro / Wavelab 4 [message #63894 is a reply to message #63883]

Sat, 28 January 2006 14:02

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

Not having much luck...had a partial sync with CEPro but lost it.

Help

Don

"Don Nafe" <dnafe@magma.ca> wrote in message news:43dba9bf@linux...
> HI All
>
> Well after a year and a half I finally got my second rig up and running
> and am going to attempt to get Paris and CEPro 1.2 / Wavelab 4.0 synced.
>
> I have SPDIF / ADAT and Light pipe all wired up and have audio playback
> from both CEP and Wavelab happening in Paris....now it's time to attemp
> syncing the second rig to Paris and then eventually Paris to the second
> rig.
>
> So the big question is where do I start.
>
> DOn
>

Report message to a moderator

Re: Paris-> Dakota Frontier-> CEPro / Wavelab 4 [message #63895 is a reply to message #63894]

Sat, 28 January 2006 14:43

audioguy_editout_

Messages: 249
Registered: December 2005

Senior Member

Sync? what are you trying to sync?

David.

Don Nafe wrote:
> Not having much luck...had a partial sync with CEPro but lost it.
>
> Help
>
> Don
>
>
> "Don Nafe" <dnafe@magma.ca> wrote in message news:43dba9bf@linux...
>
>>HI All
>>
>>Well after a year and a half I finally got my second rig up and running
>>and am going to attempt to get Paris and CEPro 1.2 / Wavelab 4.0 synced.
>>
>>I have SPDIF / ADAT and Light pipe all wired up and have audio playback
>>from both CEP and Wavelab happening in Paris....now it's time to attemp
>>syncing the second rig to Paris and then eventually Paris to the second
>>rig.
>>
>>So the big question is where do I start.
>>
>>DOn
>>
>
>
>

Report message to a moderator

Re: Paris-> Dakota Frontier-> CEPro / Wavelab 4 [message #63896 is a reply to message #63895]

Sat, 28 January 2006 14:47

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

Paris and Cool Edit Pro and Wavelab

Don

"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
news:43dbf492@linux...
> Sync? what are you trying to sync?
>
> David.
>
> Don Nafe wrote:
>> Not having much luck...had a partial sync with CEPro but lost it.
>>
>> Help
>>
>> Don
>>
>>
>> "Don Nafe" <dnafe@magma.ca> wrote in message news:43dba9bf@linux...
>>
>>>HI All
>>>
>>>Well after a year and a half I finally got my second rig up and running
>>>and am going to attempt to get Paris and CEPro 1.2 / Wavelab 4.0 synced.
>>>
>>>I have SPDIF / ADAT and Light pipe all wired up and have audio playback
>>>from both CEP and Wavelab happening in Paris....now it's time to attemp
>>>syncing the second rig to Paris and then eventually Paris to the second
>>>rig.
>>>
>>>So the big question is where do I start.
>>>
>>>DOn
>>>
>>
>>

Report message to a moderator

Re: Paris-> Dakota Frontier-> CEPro / Wavelab 4 [message #63898 is a reply to message #63895]

Sat, 28 January 2006 16:10

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

Hey Dave

Got CEPro Working...had to enable sample sync and also midi channel 1...this
is good, confusing but good

Now for some really dumb Q's

How do you set up the patchbay to route audio out the ADAT down the
lightpipe

same question for SPDIF?

No rush as I'm still messing with things here...

Dr. Don - Digital Dummy

"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
news:43dbf492@linux...
> Sync? what are you trying to sync?
>
> David.
>
> Don Nafe wrote:
>> Not having much luck...had a partial sync with CEPro but lost it.
>>
>> Help
>>
>> Don
>>
>>
>> "Don Nafe" <dnafe@magma.ca> wrote in message news:43dba9bf@linux...
>>
>>>HI All
>>>
>>>Well after a year and a half I finally got my second rig up and running
>>>and am going to attempt to get Paris and CEPro 1.2 / Wavelab 4.0 synced.
>>>
>>>I have SPDIF / ADAT and Light pipe all wired up and have audio playback
>>>from both CEP and Wavelab happening in Paris....now it's time to attemp
>>>syncing the second rig to Paris and then eventually Paris to the second
>>>rig.
>>>
>>>So the big question is where do I start.
>>>
>>>DOn
>>>
>>
>>

Report message to a moderator

Re: Paris-> Dakota Frontier-> CEPro / Wavelab 4 [message #63899 is a reply to message #63898]

Sat, 28 January 2006 16:42

audioguy_editout_

Messages: 249
Registered: December 2005

Senior Member

So, by "sync", do you mean when you press play on Paris, CEP
and WL follow along? Or, are you refering to "clocking" both
compters for audio trnasfer without clicks and pops?

David.

Don Nafe wrote:

> Hey Dave
>
> Got CEPro Working...had to enable sample sync and also midi channel 1...this
> is good, confusing but good
>
> Now for some really dumb Q's
>
> How do you set up the patchbay to route audio out the ADAT down the
> lightpipe
>
> same question for SPDIF?
>
> No rush as I'm still messing with things here...
>
> Dr. Don - Digital Dummy
>
>
>
> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
> news:43dbf492@linux...
>
>>Sync? what are you trying to sync?
>>
>>David.
>>
>>Don Nafe wrote:
>>
>>>Not having much luck...had a partial sync with CEPro but lost it.
>>>
>>>Help
>>>
>>>Don
>>>
>>>
>>>"Don Nafe" <dnafe@magma.ca> wrote in message news:43dba9bf@linux...
>>>
>>>
>>>>HI All
>>>>
>>>>Well after a year and a half I finally got my second rig up and running
>>>>and am going to attempt to get Paris and CEPro 1.2 / Wavelab 4.0 synced.
>>>>
>>>>I have SPDIF / ADAT and Light pipe all wired up and have audio playback
>>>
>>>>from both CEP and Wavelab happening in Paris....now it's time to attemp
>>>
>>>>syncing the second rig to Paris and then eventually Paris to the second
>>>>rig.
>>>>
>>>>So the big question is where do I start.
>>>>
>>>>DOn
>>>>
>>>
>>>
>

Report message to a moderator

Re: Paris-> Dakota Frontier-> CEPro / Wavelab 4 [message #63900 is a reply to message #63899]

Sat, 28 January 2006 17:04

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

Right now hit play and both comps lock. - Working

Have audio coming into Paris using ADAT module - Working

Need to know Patchbay set up in Paris for ADAT and SPDIF use - reading and
experimenting

Need to know routing in Dakota for the same - reading and experimenting

Don

"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
news:43dc1076$1@linux...
> So, by "sync", do you mean when you press play on Paris, CEP and WL follow
> along? Or, are you refering to "clocking" both compters for audio trnasfer
> without clicks and pops?
>
> David.
>
> Don Nafe wrote:
>
>> Hey Dave
>>
>> Got CEPro Working...had to enable sample sync and also midi channel
>> 1...this is good, confusing but good
>>
>> Now for some really dumb Q's
>>
>> How do you set up the patchbay to route audio out the ADAT down the
>> lightpipe
>>
>> same question for SPDIF?
>>
>> No rush as I'm still messing with things here...
>>
>> Dr. Don - Digital Dummy
>>
>>
>>
>> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
>> news:43dbf492@linux...
>>
>>>Sync? what are you trying to sync?
>>>
>>>David.
>>>
>>>Don Nafe wrote:
>>>
>>>>Not having much luck...had a partial sync with CEPro but lost it.
>>>>
>>>>Help
>>>>
>>>>Don
>>>>
>>>>
>>>>"Don Nafe" <dnafe@magma.ca> wrote in message news:43dba9bf@linux...
>>>>
>>>>
>>>>>HI All
>>>>>
>>>>>Well after a year and a half I finally got my second rig up and running
>>>>>and am going to attempt to get Paris and CEPro 1.2 / Wavelab 4.0
>>>>>synced.
>>>>>
>>>>>I have SPDIF / ADAT and Light pipe all wired up and have audio playback
>>>>
>>>>>from both CEP and Wavelab happening in Paris....now it's time to attemp
>>>>
>>>>>syncing the second rig to Paris and then eventually Paris to the second
>>>>>rig.
>>>>>
>>>>>So the big question is where do I start.
>>>>>
>>>>>DOn
>>>>>
>>>>
>>>>
>>

Report message to a moderator

Previous Topic:	What are the firewire drives that are reliable right now for you?
Next Topic:	OT:Okay So, What does this mean for the DAW World

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jun 20 18:12:11 PDT 2024

Total time taken to generate the page: 0.01348 seconds