The PARIS Forums


Home » The PARIS Forums » PARIS: Main » HELP-IN SESSION EMERGENCY
HELP-IN SESSION EMERGENCY [message #58162] Wed, 14 September 2005 08:29 Go to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
happens.
>>
>> I'm not too PC savvy as this is my first PC.
>>
>> Any help PLEASE?!
>>
>> Pete
>
>Rob,no I'm not getting any beeps after hitting the start button;
just lights and fans thats it.

Pete

"Rob Ars
Re: HELP-IN SESSION EMERGENCY [message #58164 is a reply to message #58162] Wed, 14 September 2005 08:36 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   GREECE
Messages: 1056
Registered: August 2005
Senior Member
ideo card,same thing.
>
> It doesn't seem to be going through its boot cycle at all.I don't
> hear the hard drive start up or the beeps I usually hear.The
> lights and fans all come on,but thats all.SOund like power supply
> to you?
>
> Thanks,
> Pete
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >My office computer sometimes does this. I don't know why. what cures it
> is
> >to turn on the computer with the startup button and then immeditely hit
> the
> >reset button while it is in it's boot cycle.
> >
> >If this doesn't work, reseat the video card. Double check the VGA cable
> >c
Re: HELP-IN SESSION EMERGENCY [message #58165 is a reply to message #58164] Wed, 14 September 2005 08:39 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
onnection between the card and the monitor (both ends). Reboot.
> >
> >Good luck,
> >
> >Deej
> >
> >
> >
> >"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
> >news:432841d6$1@linux...
> >>
> >> SO I turn on my PC and everything comes on,fans,lights,but
> >> nothing comes on the monitor.It doesn't sound like the computer
> >> is going through its normal boot sequence either.I tried the
> >> reset button,nothing happens.
> >>
> >> I'm not too PC savvy as this is my first PC.
> >>
> >> Any help PLEASE?!
> >>
> >> Pete
> >
> >
>Last time this happened to me, the PSU lost one of the voltage rails..
got a spare supply around? even a small one for testing will do.

David.

Pete Ruthenburg wrote:

> Rob,no I'm not getting any beeps after hitting the start button;
> just lights and fans thats it.
>
> Pete
>
> "Rob Arsenault" <
Re: HELP-IN SESSION EMERGENCY [message #58166 is a reply to message #58165] Wed, 14 September 2005 08:46 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   GREECE
Messages: 1056
Registered: August 2005
Senior Member
info@studiomanitou.com> wrote:
>
>>Pete, do you hear the first beep (post) power-on-self-test when booting?
>>
>>
>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>news:432841d6$1@linux...
>>
>>> SO I turn on my PC and everything comes on,fans,lights,but
>>>nothing comes on the monitor.It doesn't sound like the computer
>>>is going through its normal boot sequence either.I tried the
>>>reset button,nothing happens.
>>>
>>>I'm not too PC savvy as this is my first PC.
>>>
>>>Any help PLEASE?!
>>>
>>>Pete
>>
>>
>Pete,
If everything is black and no beep at power up, there can be so much that's
doing the trouble. First of all I think you shall take of the powercable
back on the computer and let it rest some minutes without any passive power
at all. Controll all the cables to see that they're OK inside and outside
and try starting once again. If nothing's yet happening and it's all black
yet, there can be many different faults. First of all, control the
powersupply that it's OK. If so, it can be a bad seated or collapsed graphic
card or a collapsed chipset on the motherboard. It's not good to say at all,
this is just some ideas I have that I know can make these kind of problems.

Erling

"Pete Ruthenburg" <ruthenburg@sbcglobal.net> skrev i en meddelelse
news:43284dee$1@linux...
>
> Rob,no I'm not getting any beeps after hitting the start button;
> just lights and fans thats it.
>
> Pete
>
> "
Re: HELP-IN SESSION EMERGENCY [message #58167 is a reply to message #58162] Wed, 14 September 2005 08:48 Go to previous messageGo to next message
EK Sound is currently offline  EK Sound   CANADA
Messages: 939
Registered: June 2005
Senior Member
;Rob Arsenault" <info@studiomanitou.com> wrote:
>>Pete, do you hear the first beep (post) power-on-self-test when booting?
>>
>>
>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>news:432841d6$1@linux...
>>>
>>> SO I turn on my PC and everything comes on,fans,lights,but
>>> nothing comes on the monitor.It doesn't sound like the computer
Re: HELP-IN SESSION EMERGENCY [message #58168 is a reply to message #58162] Wed, 14 September 2005 09:09 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
/> >>> is going through its normal boot sequence either.I tried the
>>> reset button,nothing happens.
>>>
>>> I'm not too PC savvy as this is my first PC.
>>>
>>> Any help PLEASE?!
>>>
>>> Pete
>>
>>
>I'm using it on each track. I'm going to prolly just remove the individual
track dither and see what happens.

I have it from a very respected and reliable source that *real men* don't
dither..........they truncate.

No, IMHO, *truncation* just sounds like a much more manly thing to
do........I mean, *dither*?????......it sounds sort of like something a
fairy would sprinkle on something.

;o)

"Neil" <OIUOIU@OIU.com> wrote in message news:4326f37e$1@linux...
>
> "Deej" <

Report message to a moderator

Re: HELP-IN SESSION EMERGENCY [message #58169 is a reply to message #58162] Wed, 14 September 2005 09:25 Go to previous messageGo to next message
Rob Arsenault is currently offline  Rob Arsenault   CANADA
Messages: 152
Registered: September 2005
Senior Member
:autoblack-this@ditherboy.net" target="_blank">autoblack-this@ditherboy.net> wrote:
> >
> >Ya know, I meant to try this at one time and I got sidetracked.
> >
> >Hmmmm.....
>
> That's gonna be the fix... I can almost guarantee it 100%.
> If it doesn't fix it, then you've got some other kind of issue
> going on that's not related to the dither noise itself.
> Are you inserting the UV22 on every single track in SX? Or
> across submixes? Just wondering where you're applying it.
>
> Neil
>
>
> >
> >"Neil" <
Re: HELP-IN SESSION EMERGENCY [message #58170 is a reply to message #58168] Wed, 14 September 2005 09:18 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
target="_blank">IUOI@OIU.com> wrote:
> >>
> >>"Dimitrios" <musurgio@otenet.gr> wrote:
> >>>DJ,
> >>>Have you trie UV22 the "low" setting ?
> >>
> >>Is he using the UV22? In that case, he should also try using
> >>the "Auto-Black" option, as well... that will stop the dither
> >>noise once a track drops out - in which case, he wouldn't hear
> >>the noise on reverb tails.
> >>
> >>Neil
> >
>Try hitting F8 while it's going through it's start up...hopefully a window
will come up and allow you to start the comp in last working config mode or
safe mode. If not try an alternate vidoe card after that I'm at a loss

my $0.02

Don


"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
news:432841d6$1@linux...
>
> SO I turn on my PC and everything comes on,fans,lights,but
> nothing comes on the monitor.It doesn't sound like the computer
> is going through its normal boot sequence either.I tried the
> reset button,nothing happens.
>
> I'm not too PC savvy as this is my first PC.
>
> Any help PLEASE?!
>
> PeteThis is a multi-part message in MIME format.

------=_NextPart_000_006A_01C5B923.EB8B5C60
Conten
Re: HELP-IN SESSION EMERGENCY [message #58171 is a reply to message #58169] Wed, 14 September 2005 09:21 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
t-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

>It was held on what's called the papal site,=20

Dude!!!!!........that's a sorta' bizarro.image......the Stones and the =
Pope? Did they sing Sympathy for the Vatican?

;o)

"Rob Arsenault" <mani2@nbnet.nb.ca> wrote in message =
news:432610cb@linux...
Yea, my buddy sent me these, man I wish I had gone.
I am not a big Stones fan but my buddy said they put on an amazing =
show 2.5h non stop with piros at the end to boot. It was held on what's =
called the papal site, this natural amphitheatre once hosted 150 000 =
people for pope Jean-Paul back in 85 I beleave.


>Some great shots in there!=20
Tom
"Rob Arsenault" <
Re: HELP-IN SESSION EMERGENCY [message #58172 is a reply to message #58170] Wed, 14 September 2005 09:37 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
info@studiomanitou.com> wrote in message =
news:43257113@linux...
85 000 people and no major incidents, amazing.

=
http://www.studiomanitou.com/stuff/Stones_sep_2005_Moncton_N B_Canada.ZIP =



------=_NextPart_000_006A_01C5B923.EB8B5C60
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>&gt;It was held on what's&nbsp;called the papal =
site,=20
</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>Dude!!!!!........that's a sorta' =
bizarro.image......the Stones=20
and the Pope? Did they sing Sympathy for the Vatican?</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>;o)</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Rob Arsenault" &lt;<A=20
href=3D"mailto:mani2@nbnet.nb.ca">mani2@nbnet.nb.ca</A>&gt; wrote in =
message <A=20
href=3D"news:432610cb@linux">news:432610cb@linux</A>...</DIV>
<DIV><FONT size=3D2>Yea, my buddy sent me these,&nbsp;man&nbsp;I wish =
I had=20
gone.</FONT></DIV>
<DIV><FONT size=3D2>I am not a big Stones fan but my buddy said they =
put on an=20
amazing show 2.5h non stop with piros&nbsp;at the end to =<
Re: HELP-IN SESSION EMERGENCY [message #58173 is a reply to message #58171] Wed, 14 September 2005 09:45 Go to previous messageGo to next message
EK Sound is currently offline  EK Sound   CANADA
Messages: 939
Registered: June 2005
Senior Member
br /> boot.&nbsp;&nbsp;It=20
was held on what's&nbsp;called the papal site, this natural =
amphitheatre once=20
hosted 150 000 people for&nbsp;pope Jean-Paul back in 85 I=20
beleave.</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV>&nbsp;<FONT face=3DArial size=3D2><FONT size=3D3>&gt;</FONT>Some =
great shots in=20
there!&nbsp;</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Rob Arsenault" &lt;<A=20
=
href=3D"mailto:info@studiomanitou.com">info@studiomanitou.com</A>&gt; =
wrote=20
in message <A=20
href=3D"n
Re: HELP-IN SESSION EMERGENCY [message #58174 is a reply to message #58171] Wed, 14 September 2005 09:46 Go to previous messageGo to next message
erlilo is currently offline  erlilo   NORWAY
Messages: 405
Registered: June 2005
Senior Member
ews:43257113@linux">news:43257113@linux</A>...</DIV>85 =
000 people=20
and no major incidents, amazing.<BR><BR><A=20
=
href=3D" http://www.studiomanitou.com/stuff/Stones_sep_2005_Moncton_N B_Can=
ada.ZIP"> http://www.studiomanitou.com/stuff/Stones_sep_2005_Moncton_N B_Ca=
nada.ZIP</A>=20
<BR><BR></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML >

------=_NextPart_000_006A_01C5B923.EB8B5C60--Hi Pete-

IMO, this is absolutely a power supply issue. I went through
two of them, with the exact symptoms you have described.

Get a 550W supply, and you should be fine.

Chris



"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
> SO I turn on my PC and everything comes on,fans,lights,but
>nothing comes on the monitor.It doesn't sound like the computer
>is going through its normal boot sequence either.I tried the
>reset button,nothing happens.
>
> I'm not too PC savvy as this is my first PC.
>
>Any help PLEASE?!
>
>PeteThree things I would try:
1- Strip it down to a bare box, vid card, HD, Ram...etc
2- Try swapping video card
3- Try another pwr supply

If you still cant get a beep out of it at this point and this box was
running perfectly before, I think you may need to go shopping for a new
MoBrd my friend.

Good luck
Rob_A



"Don Nafe" <dnafe@magma.ca> wrote in message news:

Report message to a moderator

Re: HELP-IN SESSION EMERGENCY [message #58176 is a reply to message #58162] Wed, 14 September 2005 09:51 Go to previous messageGo to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
...
>>
>> Thanks Deej.Tried the reset button,still the same;tried to
>> reseat the video card,same thing.
>>
>> It doesn't seem to be going through its boot cycle at all.I don't
>> hear the hard drive start up or the beeps I usually hear.The
>> lights and fans all come on,but thats all.SOund like power supply
>> to you?
>>
>> Thanks,
>> Pete
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>> >My office computer sometimes does this. I don't know why. what cures it
>> is
>> >to turn on the computer with the startup button and then immeditely hit
>> the
>> >reset button while it is in it's boot cycle.
Re: HELP-IN SESSION EMERGENCY [message #58178 is a reply to message #58162] Wed, 14 September 2005 11:49 Go to previous messageGo to next message
Chris Lang is currently offline  Chris Lang
Messages: 91
Registered: March 2007
Member
size=3D2>same question.&nbsp; I felt stupid and =
happy at the=20
same time.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Well, mostly stupid...</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Brandon" &lt;<A=20
=
href=3D"mailto:brandon_goodwin@REMOVETHISsbcglobal.net">

Report message to a moderator

Re: HELP-IN SESSION EMERGENCY [message #58179 is a reply to message #58176] Wed, 14 September 2005 12:05 Go to previous messageGo to next message
Rob Arsenault is currently offline  Rob Arsenault   CANADA
Messages: 152
Registered: September 2005
Senior Member
o:brandon_goodwin@R" target="_blank">brandon_goodwin@R=
EMOVETHISsbcglobal.net</A>&gt;=20
wrote in message <A=20
href=3D"news:43289baa@linux">news:43289baa@linux</A>...</DIV>Do you =
have a=20
floppy in the A: drive????<BR><BR>Remove =
it!!!!<BR><BR><BR><BR><BR><BR>"Mike=20
R." &lt;<A =
href=3D"mailto:emarenot@yahoo.com">emarenot@yahoo.com</A>&gt; wrote=20
in message <A=20
=
href=3D"news:43288c38$1@linux">news:43288c38$1@linux</A>...<BR>&gt;<BR>&g=
t; Hey=20
Pete,<BR>&gt; I'm wondering if it might help to try a new mobo =
battery.&nbsp;=20
I had a <BR>&gt; similar,<BR>&gt; can't recall if the exact, problem =
you're=20
having.&nbsp; A new battery cleared<BR>&gt; it up.<BR>&gt; =
MR<BR>&gt;<BR>&gt;=20
"Pete Ruthenburg" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">

Report message to a moderator

Re: HELP-IN SESSION EMERGENCY [message #58180 is a reply to message #58172] Wed, 14 September 2005 12:02 Go to previous messageGo to next message
rick is currently offline  rick   UNITED STATES
Messages: 1976
Registered: February 2006
Senior Member
net" target="_blank">ruthenburg@sbcglobal.net</A>&gt;=
=20
wrote:<BR>&gt;&gt;<BR>&gt;&gt;&nbsp; SO I turn on my PC and everything =
comes=20
on,fans,lights,but<BR>&gt;&gt;nothing comes on the monitor.It doesn't =
sound=20
like the computer<BR>&gt;&gt;is going through its normal boot sequence =

either.I tried the<BR>&gt;&gt;reset button,nothing=20
happens.<BR>&gt;&gt;<BR>&gt;&gt; I'm not too PC savvy as this is my =
first=20
PC.<BR>&gt;&gt;<BR>&gt;&gt;Any help=20
PLEASE?!<BR>&gt;&gt;<BR>&gt;&gt;Pete<BR >&gt; =
<BR><BR></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_0402_01C5B95A.4949DDA0--I have found the Avalon stuff to be seriously unimpressive.

One man's opinion, FWIW!

Jimmy



"Dimitrios" <musurgio@otenet.gr> wrote in message news:43283da4@linux...
> Hi,
> I advise if you want forward for the Avalon M5.
> This is the most forwarding preamp to my eras, aggresive and in front not
> brilliant but in your face with great great bottom.
> I have Great River (not the NV) with Lundahl transformers.
> I only use Great river for electric instruments especially bass and el
> guitars.
> I never use it for vocals, doesn't compliment vocals , thats my oppinion
of
> course.
> The best allarouind preamp is the Amek 9098 with newer (lower distortion)
> opa's, really really fanatstic.
> But if you are looking for that "special" right in your face sound" with
> great bottom and not extra harmonics (like 9098) but with great bottom
then
> Avalon is what I would go for.
> Anyway , rent one and try before you buy.
> Don't buy before trying anything based on what we say.
> Regards,
> Dimitrios
>
> "cujo" <chris@applemanstudio.com> wrote in message
news:43282c17$1@linux...
> >
> >
> >
> > Yeah API's on the list for next year! I just need one pre right now to
> augment
> > the AM-16's. I am looking for something more "forward" with some sheen
btu
> > can also get some funk. Sound like the GR may do that.
> >
> >
> >
> > "PN" <pnl@nospam.com> wrote:
> > >I have the 2NV and I've been really pleased with it.
> > >You can get a nearly transparent sound out of it or dial in one with
Re: HELP-IN SESSION EMERGENCY [message #58181 is a reply to message #58162] Wed, 14 September 2005 13:46 Go to previous messageGo to next message
emarenot is currently offline  emarenot
Messages: 345
Registered: June 2005
Senior Member
/> some
> >
> > >attitude.
> > >Having an output control is really helpful and the 'iron' button is
quite
> >
> > >useful.
> > >For an overall pre, you can not go wrong with the GR NV
> > >
> > >My main preamps are GR and API.
> > >I find for some E. Gits, Kick, Snare, Toms, Bass and about 75% of the
> vocals
> >
> > >I do (mostly rock, pop) I mostly use the APIs.
> > >
> > >And OMG, for Bass, an API into a DBX 160vu is the dream team come true.
> > >
> > >"cujo" <

Report message to a moderator

Re: HELP-IN SESSION EMERGENCY [message #58182 is a reply to message #58181] Wed, 14 September 2005 14:58 Go to previous messageGo to next message
Brandon is currently offline  Brandon   UNITED STATES
Messages: 49
Registered: June 2005
Member
emanstudio.com" target="_blank">chris@applemanstudio.com> wrote in message
> news:4326d8ce$1@linux...
> > >>
> > >> Anyone using the great River NV edition?
> > >>
> > >> I am looking ot add a single pre for Electric guitars and lead
> vocals..and
> > >> what ever else I feel like running through it.
> > >>
> > >> I must say my tastes run more late 60's mid 70's so I was thinking
> about
> > >> the Funkenwork..but the dude at mercinary recommended the GR..I love
mr
> >
> > >> AIkens
> > >> original GR. But I am actually not crazy about the Neve smear I
> sometimes
> > >> hear.
> > >>
> > >> Is this thing versitile enough for recording less agressive things
> well?
> >
> > >
> > >
> >
>
>I can't get the digital out to work from the mb t
Re: HELP-IN SESSION EMERGENCY [message #58183 is a reply to message #58182] Wed, 14 September 2005 15:29 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
o paris digital coax
in.http://www.digitech.com/products/gnx4.htm

OK, so maybe the recorder in it doesn't sound as good as Paris. Sure, it's
only 16 bit, and only 8 tracks...

....but it really is impressively easy to use. Convenient. Obviously no good
for any actual release stuff, but for mucking around, excellent, and for
looping... ;o)

Well looping is just the best. It's not actually the best looper in the world
as such. Some features of dedicated loopers, like reverse for example, are
absent. On the other hand you do get 8 tracks to loop on which isn't bad,
and what I especially like is that it has track buttons like a proper recorder,
so you can create 4 loops which play together, and then mute any one, or
two, or whatever, and then bring those loops back later on if you like. This
allows a lot of flexability in terms of building a peice.

I especially like the way the thing works. With some peices of gear you just
never get along with them and feel like it's a fight to get the job done,
but others are intuative and you find yourself agreeing with all the design
decisions, and when you disagree, half an hour later you end up going "Ah,
THAT's why they've done it that way!!". The GNX4 is one of the latter for
me. How it's laid out makes sense to me. There's a lot to this box, and I
reckon I've got a hold on about 3/4 of it or more already. That's not bad
for two nights mucking about.

As far as the sounds go, I haven't plugged it in to Paris or anything yet
to have a good listen, but so far the sounds have mostly impressed me. I've
heard it said that the actual amp models on this box aren't entirely accurate,
but that it's strength lies in the "WARP" feature, which allows you to make
combinations of two seperate amp/cabinet setups. From what I've heard so
far this does sound like a powerful tool. It does seem to be a true warp
function, and some very effective results can be had by criss crossing between
different cabinet models. I've heard there is a set of some 1000 odd presets
you can now buy which utilise the warp feature, which I'm considering purchasing.

Even the virtual pickup settings seem to work quite well... humbucker to
single coil and visa versa. I was expecting some cheap EQ effect, but whatever
they've done sounds like it's much more effective.

I can't wait to hook it up to a keyboard and get the vocoder working. ;o)

Ah, the joy of a new toy...

Cheers,
Kim.anyone know the latency on the lookahead settings... 0.01 - 0.050.

thanks!i have used that board but i never hooked up the onboard sound.

sorry.

-j




"Brandon" <brandon_goodwin@REMOVETHISsbcglobal.net> wrote in message
news:4328c497@linux...
> I can't get the digital out to work from the mb to paris digital coax
> in.
>
>No beeps almost always means a dead
cpu.

I hope this helps.

Mike

"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
>Rob,no I'm not getting any beeps after hitting the start button;
>just lights and fans thats it.
>
>Pete
>
>"Rob Arsenault" <info@studiomanitou.com> wrote:
>>Pete, do you hear the first beep (post) power-on-self-test when booting?
>>
>>
>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>news:432841d6$1@linux...
>>>
>>> SO I turn on my PC and everything comes on,fans,lights,but
>>> nothing comes on the monitor.It doesn't sound like the computer
>>> is going through its normal boot sequence either.I tried the
>>> reset button,nothing happens.
>>>
>>> I'm not too PC savvy as this is my first PC.
>>>
>>> Any help PLEASE?!
>>>
>>> Pete
>>
>>
>I should qualify the "almost". It could also be a dead PCI card. Network
cards are notorious for dying and causing this kind of problem. Pull everything
out except the video card and see if it starts. If not, it's a bad cpu.

Good luck!
Mike


"Mike Audet" <mike@MikeF-SPAMAudet.com> wrote:
>
>No beeps almost always means a dead
>cpu.
>
>I hope this helps.
>
>Mike
>
>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>>
>>Rob,no I'm not getting any beeps after hitting the start button;
>>just lights and fans thats it.
>>
>>Pete
>>
>>"Rob Arsenault" <info@studiomanitou.com> wrote:
>>>Pete, do you hear the first beep (post) power-on-self-test when booting?
>>>
>>>
>>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>>news:432841d6$1@linux...
>>>>
>>>> SO
Re: HELP-IN SESSION EMERGENCY [message #58189 is a reply to message #58171] Wed, 14 September 2005 19:45 Go to previous messageGo to next message
Mike Audet is currently offline  Mike Audet
Messages: 294
Registered: December 2008
Senior Member
e especially if they are more than two cards...
>>> >Regards,
>>> >Dimitrios
>>> >"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>> >news:432841d6$1@linux...
>>> >>
>>> >> SO I turn on my PC and everything comes on,fans,lights,but
>>> >> nothing comes on the monitor.It doesn't sound like the computer
>>> >> is going through its normal boot sequence either.I tried the
>>> >> reset button,nothing happens.
>>> >>
>>> >> I'm not too PC savvy as this is my first PC.
>>> >>
>>> >> Any help PLEASE?!
>>> >>
>>> >> Pete
>>> >
>>> >
>>>
>>
>>
>
>Sounds cool, Kim.

My Digitech RP2000, a previous version of their amp modeler/FX pedal, is
a real workhorse. It sounds good, is built solidly and has been very
dependable for gigging with acoustic guitar, electric guitar and violin.

Cheers,
-Jamie K
http://
Re: HELP-IN SESSION EMERGENCY [message #58190 is a reply to message #58189] Wed, 14 September 2005 19:47 Go to previous messageGo to next message
Mike Audet is currently offline  Mike Audet
Messages: 294
Registered: December 2008
Senior Member
www.JamieKrutz.com


Kim wrote:
> http://www.digitech.com/products/gnx4.htm
>
> OK, so maybe the recorder in it doesn't sound as good as Paris. Sure, it's
> only 16 bit, and only 8 tracks...
>
> ...but it really is impressively easy to use. Convenient. Obviously no good
> for any actual release stuff, but for mucking around, excellent, and for
> looping... ;o)
>
> Well looping is just the best. It's not actually the best looper in the world
> as such. Some features of dedicated loopers, like reverse for example, are
> absent. On the other hand you do get 8 tracks to loop on which isn't bad,
> and what I especially like is that it has track buttons like a proper recorder,
> so you can create 4 loops which play together, and then mute any one, or
> two, or whatever, and then bring those loops back later on if you like. This
> allows a lot of flexability in terms of building a peice.
>
> I especially like the way the thing works. With some peices of gear you just
> never get along with them and feel like it's a fight to get the job done,
> but others are intuative and you find yourself agreeing with all the design
> decisions, and when you disagree, half an hour later you end up going "Ah,
> THAT's why they've done it that way!!". The GNX4 is one of the latter for
> me. How it's laid out makes sense to me. There's a lot to this box, and I
> reckon I've got a hold on about 3/4 of it or more already. That's not bad
> for two nights mucking about.
>
> As far as the sounds go, I haven't plugged it in to Paris or anything yet
> to have a good listen, but so far the sounds have mostly impressed me. I've
> heard it said that the actual amp models on this box aren't entirely accurate,
Re: HELP-IN SESSION EMERGENCY [message #58193 is a reply to message #58166] Wed, 14 September 2005 22:27 Go to previous messageGo to next message
Martin Harrington is currently offline  Martin Harrington   AUSTRALIA
Messages: 560
Registered: September 2005
Senior Member
4;bigpond.net.au> wrote:
>
>>What sounds does your computer make when it boots up.....beeps etc.?
>>It maybe the video card need reseating.
>>--
>>Martin Harrington
>>www.lendanear-sound.com
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote in message news:432844f2@linux...
>>
>>>Dear Pete,
>>>I really think that 450W for four cards plus UAD1 (like my setup !) needs
>
>
>>>at
>>>least 500W or better 550W
>>>I had many problems with a 450W myself.
>>>Eitherway I think that your power supply is gone bad !
>>>Thats why I suggest putting anewer.
>>>So while putting a newer better put a bigger to be on the safe side.
>>>Regards,
>>>Dimitrios
>>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>>news:43284430$1@linux...
>>>
>>>>I think its a 450w power supply,Chris Ludwig built it when he was
>>>>at Eastcoast so the power should be fine.I've been running 4 eds
>>>>and 1 UAD without ever having this problem.It just doesn't seem
>>>>to be booting up like it should.
>>>>
>>>>Thanks,
>>>>Any more advice?
>>>>Pete
>>>>
>>>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>>
>>>>>Get immediately a bigger power supply and see if that helps.
>>>>>Anyway a bigger power supply is always better and EDS cards need very
>
>
>>>>>big
>>>>>one especially if they are more than two cards...
>>>>>Regards,
>>>>>Dimitrios
>>>>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>>>>news:432841d6$1@linux...
>>>>>
>>>>>> SO I turn on my PC and everything comes on,fans,lights,but
>>>>>>nothing comes on the monitor.It doesn't sound like the computer
>&
Re: HELP-IN SESSION EMERGENCY [message #58194 is a reply to message #58193] Wed, 14 September 2005 22:51 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
gt;>>>>is going through its normal boot sequence either.I tried the
>>>>>>reset button,nothing happens.
>>>>>>
>>>>>> I'm not too PC savvy as this is my first PC.
>>>>>>
>>>>>>Any help PLEASE?!
>>>>>>
>>>>>>Pete
>>>>>
>>>>>
>>>
>>
>Jeff hoover wrote:
> Pete,
>
> Hard drive or RAM ? a locked ata controller can exhibit this problem as
> can defective memory. I'm up for a little longer 503-704-3701 if you
> want to call and vent.
>
> Jeff Hoover
>

or troubleshoot

;o)

Jh
> Pete Ruthenburg wrote:
>
>> Thats just it;it doesn't make any sounds.
>>
>> I've stripped it down to mobo(no pci,video cards or ram)and cpu.
>> Still all I get on power up is lights and fans come on thats it.
>>
>> I'm beginning to think its my mobo or cpu.I might still try a
>> new PS first.
>>
>> Thanks,
>> Pete
>>
>> "Martin Harrington" <lendan@bigpond.net.au> wrote:
>>
>>> What sounds does your computer make when it boots up.....beeps etc.?
>>> It maybe the video card need reseating.
>>> --
>>> Martin Harrington
>>> www.lendanear-sound.com
>>>
>>> "Dimitrios" <musurgio@otenet.gr> wrote in message news:432844f2@linux...
>>>
>>>> Dear Pete,
>>>> I really think that 450W for four cards plus UAD1 (like my setup !)
>>>> needs
>>
>>
>>
>>>> at
>>>> least 500W or better 550W
>>>> I had many problems with a 450W myself.
>>>> Eitherway I think that your power supply is gone bad !
>>>> Thats why I suggest putting anewer.
>>>> So while putting a newer better put a bigger to be on the safe side.
>>>> Regards,
>>>> Dimitrios
>>>> "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>>> news:43284430$1@linux...
>>>>
>>>>> I think its a 450w power supply,Chris Ludwig built it when he was
>>>>> at Eastcoast so the power should be fine.I've been running 4 eds
>>>>> and 1 UAD without ever having this problem.It just doesn't seem
>>>>> to be booting up like it should.
>>>>>
>>>>> Thanks,
>>>>> Any more advice?
>>>>> Pete
>>>>>
>>>>> "Dimitrios" <musurgio@otenet.gr
Re: HELP-IN SESSION EMERGENCY [message #58196 is a reply to message #58194] Wed, 14 September 2005 23:00 Go to previous messageGo to next message
JeffH is currently offline  JeffH   UNITED STATES
Messages: 307
Registered: October 2007
Location: Wamic, OR
Senior Member
eate 4 loops which play together, and then mute any one,
or
>> two, or whatever, and then bring those loops back later on if you like.
This
>> allows a lot of flexability in terms of building a peice.
>>
>> I especially like the way the thing works. With some peices of gear you
just
>> never get along with them and feel like it's a fight to get the job done,
>> but others are intuative and you find yourself agreeing with all the design
>> decisions, and when you disagree, half an hour later you end up going
"Ah,
>> THAT's why they've done it that way!!". The GNX4 is one of the latter
for
>> me. How it's laid out makes sense to me. There's a lot to this box, and
I
>> reckon I've got a hold on about 3/4 of it or more already. That's not
bad
>> for two nights mucking about.
>>
>> As far as the sounds go, I haven't plugged it in to Paris or anything
yet
>> to have a good listen, but so far the sounds have mostly impressed me.
I've
>> heard it said that the actual amp models on this box aren't entirely accurate,
>> but that it's strength lies in the "WARP" feature, which allows you to
make
>> combinations of two seperate amp/cabinet setups. From what I've heard
so
>> far this does sound like a powerful tool. It does seem to be a true warp
>> function, and some very effective results can be had by criss crossing
between
>> different cabinet models. I've heard there is a set of some 1000 odd presets
>> you can now buy which utilise the warp feature, which I'm considering
purchasing.
>>
>> Even the virtual pickup settings seem to work quite well... humbucker
to
>> single coil and visa versa. I was expecting some cheap EQ effect, but
whatever
>> they've done sounds like it's much more effective.
>>
>> I can't wait to hook it up to a keyboard and get the vocoder working.
;o)
>>
>> Ah, the joy of a new toy...
>>
>> Cheers,
>> Kim.Well...............hmmmmm.............Rudy is from Switzerland. Is Pooh
Corner in Switzerland? You're thinking of Pooty Bear........I think.......

;o)

"Neil" <OIUOIU@OIU.com> wrote in message news:4328f088$1@linux...
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>
> >My friend, Rudy Bear, came by here today.
>
> Rudy Bear? Wasn't he a character in an A.A. Milne book?
>
> :)i believe it's a 1:1 relationship.

On Wed, 14 Sep 2005 20:22:22 -0500, "Jeremy Luzier"
<j.luzier@comcast.net> wrote:

>anyone know the latency on the lookahead settings... 0.01 - 0.050.
>
>thanks!
>
>Yea, my sequencer box does this sometimes and this is exactly what I do and
it boots.


"rick" <parnell68@hotmail.com> wrote in message
news:srsgi1d2kn4opp698csldv5uogj0tt2vbg@4ax.com...
> on mine it just hangs until i re hit the power switch to turn it off
> the hit it again and it boots.
>
> On Wed, 14 Sep 2005 10:37:33 -0600, "DJ"
> <animix_s
Re: HELP-IN SESSION EMERGENCY [message #58197 is a reply to message #58196] Wed, 14 September 2005 23:01 Go to previous messageGo to next message
JeffH is currently offline  JeffH   UNITED STATES
Messages: 307
Registered: October 2007
Location: Wamic, OR
Senior Member
pam-this-ahole_@animas.net> wrote:
>
>>Normally what happens with mine is that I boot the computer and I don't
>>hear
>>a beep. I shut it down, then I reboot and after about 3 seconds I hit the
>>reset button, I hear a beep, the video card is recognized and then
>>everything is fine.
>>
>>I don't know if it is the PSU or not, but if you're running 4 x EDS cards
>>and a full load of HD's, you're probably skating pretty close to the edge.
>>
>>Deej
>>
>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>news:43284d67$1@linux...
>>>
>>> Thanks Deej.Tried the reset button,still the same;tried to
>>> reseat the video card,same thing.
>>>
>>> It doesn't seem to be going through its boot cycle at all.I don't
>>> hear the hard drive start up or the beeps I usually hear.The
>>> lights and fans all come on,but thats all.SOund like power supply
>>> to you?
>>>
>>> Thanks,
>>> Pete
>>>
>>> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>>> >My office computer sometimes does this. I don't know why. what cures it
>>> is
>>> >to turn on the computer with the startup button and then immeditely hit
>>> the
>>> >reset button while it is in it's boot cycle.
>>> >
>>> >If this doesn't work, reseat the video card. Double check the VGA cable
>>> >connection between the card and the monitor (both ends). Reboot.
>>> >
>>> >Good luck,
>>> >
>>> >Deej
>>> >
>>> >
>>> >
>>> >"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message
>>> >news:432841d6$1@linux...
>>> >>
>>> >> SO I turn on my PC and everything comes on,fans,lights,but
>>> >> nothing comes on the monitor.It doesn't sound like the computer
>>> >> is going through its normal boot sequence either.I tried the
>>> >> reset button,nothing happens.
>>> >>
>>> >> I'm not too PC savvy as this is my first PC.
>>> >>
>>> >> Any help PLEASE?!
>>> >>
>>> >> Pete
>>> >
>>> >
>>>
>>
>jimmy, I have heard that too. Of course all of this shit is just opinions.
And Dimitrios is right, I should see if mercinary will let me take a few
units out. Even if I pay a rental fee. I know what I am lookinng for is not
goinng to be the last pre I buy. I just need sort of an all around up grade
for main overdubs. This seems like a good chois.
I was thinking the Funkenworks looked cool too at 975.00



"uptown jimmy" <johnson314@bellsouth.net> wrote:
>I have found the Avalon stuff to be seriously unimpressive.
>
>One man's opinion, FWIW!
>
>Jimmy
>
>
>
>"Dimitrios" <musurgio@otenet.gr> wrote in message news:43283da4@linux...
>> Hi,
>> I advise if you want forward for the Avalon M5.
>> This is the most forwarding preamp to my eras, aggresive and in front
not
>> brilliant but in your face with great great bottom.
>> I have Great River (not the NV) with Lundahl transformers.
>> I only use Great river for electric instruments especially bass and el
>> guitars.
>> I never us
Re: HELP-IN SESSION EMERGENCY [message #58201 is a reply to message #58180] Thu, 15 September 2005 04:32 Go to previous messageGo to next message
Rob Arsenault is currently offline  Rob Arsenault   CANADA
Messages: 152
Registered: September 2005
Senior Member
/> >> Hey Pete,
>> I'm wondering if it might help to try a new mobo battery. I had a
>> similar,
>> can't recall if the exact, problem you're having. A new battery cleared
>> it up.
>> MR
>>
>> "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>>>
>>> SO I turn on my PC and everything comes on,fans,lights,but
>>>nothing comes on the monitor.It doesn't sound like the computer
>>>is going through its normal boot sequence either.I tried the
>>>reset button,nothing happens.
>>>
>>> I'm not too PC savvy as this is my first PC.
>>>
>>>Any help PLEASE?!
>>>
>>>Pete
>>
>
>Is there something to take care of in the bios? Often, things like these are
in off-mode as standard in the bios.

Erling

"Brandon" <brandon_goodwin@REMOVETHISsbcglobal.net> skrev i en meddelelse
news:4328c497@linux...
> I can't get the digital out to work from the mb to paris digital coax
> in.
>Hey DJ -

Where are you at? I have a Jazz-Fusion group
(www.postmodernblues.com) that might be able
to do something - I would have to talk to the
rest of the group and check availablility. Let
me know more specific details -




"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>My friend, Rudy Bear, came by here today. Rudy owns Trimble Hot Springs
>across the street from my house. He usually has weekend jazz concerts at
the
>Springs on the weekends and there is a nice stage/covered pavillion area
>there.
>
>He was one of the big movers and shakers of the Telluride Jazz Festival
for
>many years He was talking to Winton and Ellis Marsalis earlier today and
>they are setting up a foundation to help the flood victims. He asked me
if I
>would give him a hand putting this together.
>
>Of course, since I'm a redneck ***hole, I told him to **** off...........
>
>;oP
>'
>'
>'
>'
>'
>'
>'.............but seriously folks......... I've got an experienced and very
>good sound man with a nice A & H board who has tentavily committed to this.
>and it looks like this will be coming
>together either on the afternoon of the 25th (a Sunday) or the next
>weekend..
>
>All gate proceeds will be donated to this Marsalis foundation. If any of
you
>jazz musicians are interested and would be able to come and donate your
>time, (or if any Parisites would just like to attend), I'll put you up here
>and feed you and we can have some fun.
>
>Send me an e-mail at animix@animas.net or give me a call at 970-375-7081.
>
>
>I trust Mercenary's opinions implicitly. They deal in only the best stuff,
period, and they are as staight-up and trust-worthy as any company I have
ever dealt with. I am not quite so keen on any other music gear-pimps, btw.
I'm sure they will let you audition a few different units if you have the
roo
Re: HELP-IN SESSION EMERGENCY [message #58203 is a reply to message #58182] Thu, 15 September 2005 06:59 Go to previous messageGo to next message
erlilo is currently offline  erlilo   NORWAY
Messages: 405
Registered: June 2005
Senior Member
_blank">chris@applemanstudio.com> wrote in message
> >> news:4326d8ce$1@linux...
> >> > >>
> >> > >> Anyone using the great River NV edition?
> >> > >>
> >> > >> I am looking ot add a single pre for Electric guitars and lead
> >> vocals..and
> >> > >> what ever else I feel like running through it.
> >> > >>
> >> > >> I must say my tastes run more late 60's mid 70's so I was thinking
> >> about
> >> > >> the Funkenwork..but the dude at mercinary recommended the GR..I
love
> >mr
> >> >
> >> > >> AIkens
> >> > >> original GR. But I am actually not crazy about the Neve smear I
> >> sometimes
> >> > >> hear.
> >> > >>
> >> > >> Is this thing versitile enough for recording less agressive things
> >> well?
> >> >
> >> > >
> >> > >
> >> >
> >>
> >>
> >
> >
>Hi All

I've got a song that the band wants to edit in a major way ie: Cutting out
and Adding sections. The problem is that the song has some major automation
going on and the automations edits will have to be moved, cut or added.

Are there any tricks to doing this ie: "snap to object end" like in the edit
window ?

If not I'm looking at one major cluster f-ck

DonThis is a multi-part message in MIME format.

------=_NextPart_000_0514_01C5B9E4.9D9FBA20
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Don,
I would choose your edit point and place a marker there.
Select and cut all objects and automation data at this point.
Now cut and paste should work for everything except mutes
that cross that line. It has worked for me in the past. Surprisingly
simple if you don't forget where you are in the process.=20
Tom
"Don Nafe" <

Report message to a moderator

Re: HELP-IN SESSION EMERGENCY [message #58222 is a reply to message #58203] Thu, 15 September 2005 10:33 Go to previous message
pauln[2] is currently offline  pauln[2]
Messages: 28
Registered: September 2007
Junior Member
;>><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
>>><BLOCKQUOTE=20
>>>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>> <DIV>"Don Nafe" <<A =
>>>href=3D"mailto:dnafe@magma.ca">dnafe@magma.ca</A>>=20
>>> wrote in message <A=20
>>> href=3D"news:4329864e$1@linux">news:4329864e$1@linux</A>...</DIV>Hi=20
>>> All<BR><BR>I've got a song that the band wants to edit in a major way
>> =
>>>ie:=20
>>> Cutting out <BR>and Adding sections. The problem is that the song has
>> =
>>>some=20
>>> major automation <BR>going on and the automations edits will have to
=
>>>be moved,=20
>>> cut or added.<BR><BR>Are there any tricks to doing this ie: "snap to
=
>>>object=20
>>> end" like in the edit <BR>window ?<BR><BR>If not I'm looking at one
=
>>>major=20
>>> cluster f-ck<BR><BR>Don <BR><BR></BLOCKQUOTE></BODY></HTML>
>>>
>>>
>>
>
>Had an issue with an IF/2 that caused the phasing to be so weird it
literally caused our ears to hurt. At first we though it was the
outboard equipment so we did a loopback and the problem persisted.
Replaced it with another IF/2 and the problem went away. The old IF/2
is in a Goodwill somewhere

:o)

JH

DJ wrote:
> It's ugly. Started having *lots* of clocking problems. Traced it to an IF-2
> that had started going south, it seems. If you start having unexplained
> wierdness and have IF-2's hooked up to you MEC, try unplugging them and see
> if that fixes the problem.
>
> Deej
>
>Both of mine went south pretty much simultaneously which makes me
suspicious, but the proof is in the fact that removing them stabilized the
system completely. I had one sitting on top of the other. They do generate
some (but not a whole lot of) heat. Perhaps that was the reason they failed
about the same time.

Go figure.

Deej

"Jeff hoover" <jkhoover@excite.com> wrote in message news:4329dcc5@linux...<
Previous Topic: Great River NV
Next Topic: NoLimit lookahead latency
Goto Forum:
  


Current Time: Thu Dec 05 01:00:25 PST 2024

Total time taken to generate the page: 0.01733 seconds