The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Found the solution: EDS Compressor Problem
Found the solution: EDS Compressor Problem [message #87113] Sun, 24 June 2007 04:07 Go to next message
Sharon is currently offline  Sharon   UNITED STATES
Messages: 8
Registered: June 2007
Junior Member
I sure appreciate all the helpful tips posted here and wanted to share that
I found the solution to a problem when I migrated Paris to Windows XP Pro.

The problem was that the EDS compressors were not working for the channel
inserts. It was frustrating since I really like using them and all the other
insert efx were working.

I'm a big fan of Chuck's plugins and had installed all of them.
Unfortunately, on my box, there was a conflict. When I removed all but the
basic EDS effects dlls from the system32 folder the compressors worked
again.

I still have the eventiter and modulation efx working so that good since I
like them alot too.

Anyways, since I had posted in the midst of my confusion, thought I post the
solution too.
Re: Found the solution: EDS Compressor Problem [message #87118 is a reply to message #87113] Sun, 24 June 2007 10:07 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
I hadn't seen that reaction yet, but I think some of the skunkworks plugs
were deemed too buggy and it was suggested to not install them. Which of
them did you have installed?

AA


"Mark" <sharonaloveslife@yahoo.com> wrote in message news:467e51e8@linux...
>I sure appreciate all the helpful tips posted here and wanted to share that
>I found the solution to a problem when I migrated Paris to Windows XP Pro.
>
> The problem was that the EDS compressors were not working for the channel
> inserts. It was frustrating since I really like using them and all the
> other insert efx were working.
>
> I'm a big fan of Chuck's plugins and had installed all of them.
> Unfortunately, on my box, there was a conflict. When I removed all but the
> basic EDS effects dlls from the system32 folder the compressors worked
> again.
>
> I still have the eventiter and modulation efx working so that good since I
> like them alot too.
>
> Anyways, since I had posted in the midst of my confusion, thought I post
> the solution too.
>
Re: Found the solution: EDS Compressor Problem [message #87122 is a reply to message #87118] Sun, 24 June 2007 11:29 Go to previous messageGo to next message
JeffH is currently offline  JeffH   UNITED STATES
Messages: 307
Registered: October 2007
Location: Wamic, OR
Senior Member
Aaron Allen wrote:
> I hadn't seen that reaction yet, but I think some of the skunkworks plugs
> were deemed too buggy and it was suggested to not install them. Which of
> them did you have installed?
>
> AA
>
But which of them were deemed "too buggy"?

Jeff


>
> "Mark" <sharonaloveslife@yahoo.com> wrote in message news:467e51e8@linux...
>
>>I sure appreciate all the helpful tips posted here and wanted to share that
>>I found the solution to a problem when I migrated Paris to Windows XP Pro.
>>
>>The problem was that the EDS compressors were not working for the channel
>>inserts. It was frustrating since I really like using them and all the
>>other insert efx were working.
>>
>>I'm a big fan of Chuck's plugins and had installed all of them.
>>Unfortunately, on my box, there was a conflict. When I removed all but the
>>basic EDS effects dlls from the system32 folder the compressors worked
>>again.
>>
>>I still have the eventiter and modulation efx working so that good since I
>>like them alot too.
>>
>>Anyways, since I had posted in the midst of my confusion, thought I post
>>the solution too.
>>
>
>
>
Re: Found the solution: EDS Compressor Problem [message #87162 is a reply to message #87118] Mon, 25 June 2007 05:37 Go to previous messageGo to next message
Sharon is currently offline  Sharon   UNITED STATES
Messages: 8
Registered: June 2007
Junior Member
I had installed all of the skunkworks plugs - I removed all but the
eventiter and the mods.

I really love the plugs and as time permits, I'll start adding them in again
until I isolate which one was causing the problem on my computer.


"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:467ea667@linux...
>I hadn't seen that reaction yet, but I think some of the skunkworks plugs
>were deemed too buggy and it was suggested to not install them. Which of
>them did you have installed?
>
> AA
>
>
> "Mark" <sharonaloveslife@yahoo.com> wrote in message
> news:467e51e8@linux...
>>I sure appreciate all the helpful tips posted here and wanted to share
>>that I found the solution to a problem when I migrated Paris to Windows XP
>>Pro.
>>
>> The problem was that the EDS compressors were not working for the channel
>> inserts. It was frustrating since I really like using them and all the
>> other insert efx were working.
>>
>> I'm a big fan of Chuck's plugins and had installed all of them.
>> Unfortunately, on my box, there was a conflict. When I removed all but
>> the basic EDS effects dlls from the system32 folder the compressors
>> worked again.
>>
>> I still have the eventiter and modulation efx working so that good since
>> I like them alot too.
>>
>> Anyways, since I had posted in the midst of my confusion, thought I post
>> the solution too.
>>
>
>
Re: Found the solution: EDS Compressor Problem [message #87163 is a reply to message #87162] Mon, 25 June 2007 06:16 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
FreakQ is the one that seemed to cause the most issues I believe, and it
seemed like there was a little 3 pack that had something in it that created
issues, name escapes me at the moment. Define "all" of them that you
installed and I can likely pick the one out.

AA

"Mark" <sharonaloveslife@yahoo.com> wrote in message
news:467fb883$1@linux...
>I had installed all of the skunkworks plugs - I removed all but the
>eventiter and the mods.
>
> I really love the plugs and as time permits, I'll start adding them in
> again until I isolate which one was causing the problem on my computer.
>
>
> "Aaron Allen" <know-spam@not_here.dude> wrote in message
> news:467ea667@linux...
>>I hadn't seen that reaction yet, but I think some of the skunkworks plugs
>>were deemed too buggy and it was suggested to not install them. Which of
>>them did you have installed?
>>
>> AA
>>
>>
>> "Mark" <sharonaloveslife@yahoo.com> wrote in message
>> news:467e51e8@linux...
>>>I sure appreciate all the helpful tips posted here and wanted to share
>>>that I found the solution to a problem when I migrated Paris to Windows
>>>XP Pro.
>>>
>>> The problem was that the EDS compressors were not working for the
>>> channel inserts. It was frustrating since I really like using them and
>>> all the other insert efx were working.
>>>
>>> I'm a big fan of Chuck's plugins and had installed all of them.
>>> Unfortunately, on my box, there was a conflict. When I removed all but
>>> the basic EDS effects dlls from the system32 folder the compressors
>>> worked again.
>>>
>>> I still have the eventiter and modulation efx working so that good since
>>> I like them alot too.
>>>
>>> Anyways, since I had posted in the midst of my confusion, thought I post
>>> the solution too.
>>>
>>
>>
>
>
Re: Found the solution: EDS Compressor Problem [message #87167 is a reply to message #87163] Mon, 25 June 2007 07:11 Go to previous messageGo to next message
pauln[2] is currently offline  pauln[2]
Messages: 28
Registered: September 2007
Junior Member
My experience is that "PC Freebies" is the culpret. I had all kinds of weirdness
going on until I uninstalled them.


"Aaron Allen" <know-spam@not_here.dude> wrote:
>FreakQ is the one that seemed to cause the most issues I believe, and it

>seemed like there was a little 3 pack that had something in it that created

>issues, name escapes me at the moment. Define "all" of them that you
>installed and I can likely pick the one out.
>
>AA
>
>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>news:467fb883$1@linux...
>>I had installed all of the skunkworks plugs - I removed all but the
>>eventiter and the mods.
>>
>> I really love the plugs and as time permits, I'll start adding them in

>> again until I isolate which one was causing the problem on my computer.
>>
>>
>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>> news:467ea667@linux...
>>>I hadn't seen that reaction yet, but I think some of the skunkworks plugs

>>>were deemed too buggy and it was suggested to not install them. Which
of
>>>them did you have installed?
>>>
>>> AA
>>>
>>>
>>> "Mark" <sharonaloveslife@yahoo.com> wrote in message
>>> news:467e51e8@linux...
>>>>I sure appreciate all the helpful tips posted here and wanted to share

>>>>that I found the solution to a problem when I migrated Paris to Windows

>>>>XP Pro.
>>>>
>>>> The problem was that the EDS compressors were not working for the
>>>> channel inserts. It was frustrating since I really like using them and

>>>> all the other insert efx were working.
>>>>
>>>> I'm a big fan of Chuck's plugins and had installed all of them.
>>>> Unfortunately, on my box, there was a conflict. When I removed all but

>>>> the basic EDS effects dlls from the system32 folder the compressors

>>>> worked again.
>>>>
>>>> I still have the eventiter and modulation efx working so that good since

>>>> I like them alot too.
>>>>
>>>> Anyways, since I had posted in the midst of my confusion, thought I
post
>>>> the solution too.
>>>>
>>>
>>>
>>
>>
>
>
Re: Found the solution: EDS Compressor Problem [message #87183 is a reply to message #87167] Mon, 25 June 2007 14:31 Go to previous messageGo to next message
Mark[1] is currently offline  Mark[1]   UNITED STATES
Messages: 2
Registered: June 2007
Junior Member
I think PC Freebies was the problem - although right now just for
troubleshooting, I also removed FreakQ, I did previously have that running
with no problem.



"PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>
> My experience is that "PC Freebies" is the culpret. I had all kinds of
> weirdness
> going on until I uninstalled them.
>
>
> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>FreakQ is the one that seemed to cause the most issues I believe, and it
>
>>seemed like there was a little 3 pack that had something in it that
>>created
>
>>issues, name escapes me at the moment. Define "all" of them that you
>>installed and I can likely pick the one out.
>>
>>AA
>>
>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>news:467fb883$1@linux...
>>>I had installed all of the skunkworks plugs - I removed all but the
>>>eventiter and the mods.
>>>
>>> I really love the plugs and as time permits, I'll start adding them in
>
>>> again until I isolate which one was causing the problem on my computer.
>>>
>>>
>>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>>> news:467ea667@linux...
>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>plugs
>
>>>>were deemed too buggy and it was suggested to not install them. Which
> of
>>>>them did you have installed?
>>>>
>>>> AA
>>>>
>>>>
>>>> "Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>> news:467e51e8@linux...
>>>>>I sure appreciate all the helpful tips posted here and wanted to share
>
>>>>>that I found the solution to a problem when I migrated Paris to Windows
>
>>>>>XP Pro.
>>>>>
>>>>> The problem was that the EDS compressors were not working for the
>>>>> channel inserts. It was frustrating since I really like using them and
>
>>>>> all the other insert efx were working.
>>>>>
>>>>> I'm a big fan of Chuck's plugins and had installed all of them.
>>>>> Unfortunately, on my box, there was a conflict. When I removed all but
>
>>>>> the basic EDS effects dlls from the system32 folder the compressors
>
>>>>> worked again.
>>>>>
>>>>> I still have the eventiter and modulation efx working so that good
>>>>> since
>
>>>>> I like them alot too.
>>>>>
>>>>> Anyways, since I had posted in the midst of my confusion, thought I
> post
>>>>> the solution too.
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
Re: Found the solution: EDS Compressor Problem [message #87189 is a reply to message #87183] Mon, 25 June 2007 16:46 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
right, remembering more of it now.... FreakQ was the one that would foul up
on the lo pass band.. I think. Jeez. Old age sucks, heh...
PC Freebies was the one Chuck said to not install.

AA


"Mark" <mark47366@yahoo.com> wrote in message news:468035cb$1@linux...
>I think PC Freebies was the problem - although right now just for
>troubleshooting, I also removed FreakQ, I did previously have that running
>with no problem.
>
>
>
> "PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>>
>> My experience is that "PC Freebies" is the culpret. I had all kinds of
>> weirdness
>> going on until I uninstalled them.
>>
>>
>> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>>FreakQ is the one that seemed to cause the most issues I believe, and it
>>
>>>seemed like there was a little 3 pack that had something in it that
>>>created
>>
>>>issues, name escapes me at the moment. Define "all" of them that you
>>>installed and I can likely pick the one out.
>>>
>>>AA
>>>
>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>news:467fb883$1@linux...
>>>>I had installed all of the skunkworks plugs - I removed all but the
>>>>eventiter and the mods.
>>>>
>>>> I really love the plugs and as time permits, I'll start adding them in
>>
>>>> again until I isolate which one was causing the problem on my computer.
>>>>
>>>>
>>>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>> news:467ea667@linux...
>>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>>plugs
>>
>>>>>were deemed too buggy and it was suggested to not install them. Which
>> of
>>>>>them did you have installed?
>>>>>
>>>>> AA
>>>>>
>>>>>
>>>>> "Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>> news:467e51e8@linux...
>>>>>>I sure appreciate all the helpful tips posted here and wanted to share
>>
>>>>>>that I found the solution to a problem when I migrated Paris to
>>>>>>Windows
>>
>>>>>>XP Pro.
>>>>>>
>>>>>> The problem was that the EDS compressors were not working for the
>>>>>> channel inserts. It was frustrating since I really like using them
>>>>>> and
>>
>>>>>> all the other insert efx were working.
>>>>>>
>>>>>> I'm a big fan of Chuck's plugins and had installed all of them.
>>>>>> Unfortunately, on my box, there was a conflict. When I removed all
>>>>>> but
>>
>>>>>> the basic EDS effects dlls from the system32 folder the compressors
>>
>>>>>> worked again.
>>>>>>
>>>>>> I still have the eventiter and modulation efx working so that good
>>>>>> since
>>
>>>>>> I like them alot too.
>>>>>>
>>>>>> Anyways, since I had posted in the midst of my confusion, thought I
>> post
>>>>>> the solution too.
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
>
Re: Found the solution: EDS Compressor Problem [message #87197 is a reply to message #87189] Mon, 25 June 2007 23:08 Go to previous messageGo to next message
JeffH is currently offline  JeffH   UNITED STATES
Messages: 307
Registered: October 2007
Location: Wamic, OR
Senior Member
Aaron

SO here's the list

PC Freebies
1. Sine generator.
2. Volume Control.
3. Comb filter.

PC Value Pack
1. FreakQ
2. BarbEQ
3. KickBack
4. ModPack
5. Nolimit
6. Pseudo
7. Eventiter

Sounds likethe freebies and FreakQ are out. Any others?

Jeff


> right, remembering more of it now.... FreakQ was the one that would foul up
> on the lo pass band.. I think. Jeez. Old age sucks, heh...
> PC Freebies was the one Chuck said to not install.
>
> AA
>
>
> "Mark" <mark47366@yahoo.com> wrote in message news:468035cb$1@linux...
>
>>I think PC Freebies was the problem - although right now just for
>>troubleshooting, I also removed FreakQ, I did previously have that running
>>with no problem.
>>
>>
>>
>>"PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>>
>>>My experience is that "PC Freebies" is the culpret. I had all kinds of
>>>weirdness
>>>going on until I uninstalled them.
>>>
>>>
>>>"Aaron Allen" <know-spam@not_here.dude> wrote:
>>>
>>>>FreakQ is the one that seemed to cause the most issues I believe, and it
>>>
>>>>seemed like there was a little 3 pack that had something in it that
>>>>created
>>>
>>>>issues, name escapes me at the moment. Define "all" of them that you
>>>>installed and I can likely pick the one out.
>>>>
>>>>AA
>>>>
>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>news:467fb883$1@linux...
>>>>
>>>>>I had installed all of the skunkworks plugs - I removed all but the
>>>>>eventiter and the mods.
>>>>>
>>>>>I really love the plugs and as time permits, I'll start adding them in
>>>
>>>>>again until I isolate which one was causing the problem on my computer.
>>>>>
>>>>>
>>>>>"Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>>>news:467ea667@linux...
>>>>>
>>>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>>>plugs
>>>
>>>>>>were deemed too buggy and it was suggested to not install them. Which
>>>
>>>of
>>>
>>>>>>them did you have installed?
>>>>>>
>>>>>>AA
>>>>>>
>>>>>>
>>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>>news:467e51e8@linux...
>>>>>>
>>>>>>>I sure appreciate all the helpful tips posted here and wanted to share
>>>
>>>>>>>that I found the solution to a problem when I migrated Paris to
>>>>>>>Windows
>>>
>>>>>>>XP Pro.
>>>>>>>
>>>>>>>The problem was that the EDS compressors were not working for the
>>>>>>>channel inserts. It was frustrating since I really like using them
>>>>>>>and
>>>
>>>>>>>all the other insert efx were working.
>>>>>>>
>>>>>>>I'm a big fan of Chuck's plugins and had installed all of them.
>>>>>>>Unfortunately, on my box, there was a conflict. When I removed all
>>>>>>>but
>>>
>>>>>>>the basic EDS effects dlls from the system32 folder the compressors
>>>
>>>>>>>worked again.
>>>>>>>
>>>>>>>I still have the eventiter and modulation efx working so that good
>>>>>>>since
>>>
>>>>>>>I like them alot too.
>>>>>>>
>>>>>>>Anyways, since I had posted in the midst of my confusion, thought I
>>>
>>>post
>>>
>>>>>>>the solution too.
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>
>
>
Re: Found the solution: EDS Compressor Problem [message #87198 is a reply to message #87197] Tue, 26 June 2007 00:14 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
Memory serving, that is all but I think I recall a little bug in NoLimit
with the outer reaches of timeline that cause problems. I'd have to fire up
the Paris rig out in the studio to say for sure, but fully clockwise and/or
fully counterclockwise I think brought about issues when adjusting
lookahead. Otherwise the plug was fine and, IMHO, awesome at what it does.

AA


"Jeff Hoover" <jkhoover@excite.com> wrote in message news:4680af00@linux...
> Aaron
>
> SO here's the list
>
> PC Freebies
> 1. Sine generator.
> 2. Volume Control.
> 3. Comb filter.
>
> PC Value Pack
> 1. FreakQ
> 2. BarbEQ
> 3. KickBack
> 4. ModPack
> 5. Nolimit
> 6. Pseudo
> 7. Eventiter
>
> Sounds likethe freebies and FreakQ are out. Any others?
>
> Jeff
>
>
>> right, remembering more of it now.... FreakQ was the one that would foul
>> up on the lo pass band.. I think. Jeez. Old age sucks, heh...
>> PC Freebies was the one Chuck said to not install.
>>
>> AA
>>
>>
>> "Mark" <mark47366@yahoo.com> wrote in message news:468035cb$1@linux...
>>
>>>I think PC Freebies was the problem - although right now just for
>>>troubleshooting, I also removed FreakQ, I did previously have that
>>>running with no problem.
>>>
>>>
>>>
>>>"PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>>>
>>>>My experience is that "PC Freebies" is the culpret. I had all kinds of
>>>>weirdness
>>>>going on until I uninstalled them.
>>>>
>>>>
>>>>"Aaron Allen" <know-spam@not_here.dude> wrote:
>>>>
>>>>>FreakQ is the one that seemed to cause the most issues I believe, and
>>>>>it
>>>>
>>>>>seemed like there was a little 3 pack that had something in it that
>>>>>created
>>>>
>>>>>issues, name escapes me at the moment. Define "all" of them that you
>>>>>installed and I can likely pick the one out.
>>>>>
>>>>>AA
>>>>>
>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>news:467fb883$1@linux...
>>>>>
>>>>>>I had installed all of the skunkworks plugs - I removed all but the
>>>>>>eventiter and the mods.
>>>>>>
>>>>>>I really love the plugs and as time permits, I'll start adding them in
>>>>
>>>>>>again until I isolate which one was causing the problem on my
>>>>>>computer.
>>>>>>
>>>>>>
>>>>>>"Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>>>>news:467ea667@linux...
>>>>>>
>>>>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>>>>plugs
>>>>
>>>>>>>were deemed too buggy and it was suggested to not install them. Which
>>>>
>>>>of
>>>>
>>>>>>>them did you have installed?
>>>>>>>
>>>>>>>AA
>>>>>>>
>>>>>>>
>>>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>>>news:467e51e8@linux...
>>>>>>>
>>>>>>>>I sure appreciate all the helpful tips posted here and wanted to
>>>>>>>>share
>>>>
>>>>>>>>that I found the solution to a problem when I migrated Paris to
>>>>>>>>Windows
>>>>
>>>>>>>>XP Pro.
>>>>>>>>
>>>>>>>>The problem was that the EDS compressors were not working for the
>>>>>>>>channel inserts. It was frustrating since I really like using them
>>>>>>>>and
>>>>
>>>>>>>>all the other insert efx were working.
>>>>>>>>
>>>>>>>>I'm a big fan of Chuck's plugins and had installed all of them.
>>>>>>>>Unfortunately, on my box, there was a conflict. When I removed all
>>>>>>>>but
>>>>
>>>>>>>>the basic EDS effects dlls from the system32 folder the compressors
>>>>
>>>>>>>>worked again.
>>>>>>>>
>>>>>>>>I still have the eventiter and modulation efx working so that good
>>>>>>>>since
>>>>
>>>>>>>>I like them alot too.
>>>>>>>>
>>>>>>>>Anyways, since I had posted in the midst of my confusion, thought I
>>>>
>>>>post
>>>>
>>>>>>>>the solution too.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>
>>
Re: Found the solution: EDS Compressor Problem [message #87206 is a reply to message #87198] Tue, 26 June 2007 06:46 Go to previous message
Rod Lincoln is currently offline  Rod Lincoln
Messages: 883
Registered: September 2005
Senior Member
That's correct, stay away from 50ms lookahead, which is all the way to the
right.
Rod
"Aaron Allen" <know-spam@not_here.dude> wrote:
>Memory serving, that is all but I think I recall a little bug in NoLimit

>with the outer reaches of timeline that cause problems. I'd have to fire
up
>the Paris rig out in the studio to say for sure, but fully clockwise and/or

>fully counterclockwise I think brought about issues when adjusting
>lookahead. Otherwise the plug was fine and, IMHO, awesome at what it does.
>
>AA
>
>
>"Jeff Hoover" <jkhoover@excite.com> wrote in message news:4680af00@linux...
>> Aaron
>>
>> SO here's the list
>>
>> PC Freebies
>> 1. Sine generator.
>> 2. Volume Control.
>> 3. Comb filter.
>>
>> PC Value Pack
>> 1. FreakQ
>> 2. BarbEQ
>> 3. KickBack
>> 4. ModPack
>> 5. Nolimit
>> 6. Pseudo
>> 7. Eventiter
>>
>> Sounds likethe freebies and FreakQ are out. Any others?
>>
>> Jeff
>>
>>
>>> right, remembering more of it now.... FreakQ was the one that would foul

>>> up on the lo pass band.. I think. Jeez. Old age sucks, heh...
>>> PC Freebies was the one Chuck said to not install.
>>>
>>> AA
>>>
>>>
>>> "Mark" <mark47366@yahoo.com> wrote in message news:468035cb$1@linux...
>>>
>>>>I think PC Freebies was the problem - although right now just for
>>>>troubleshooting, I also removed FreakQ, I did previously have that
>>>>running with no problem.
>>>>
>>>>
>>>>
>>>>"PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>>>>
>>>>>My experience is that "PC Freebies" is the culpret. I had all kinds
of
>>>>>weirdness
>>>>>going on until I uninstalled them.
>>>>>
>>>>>
>>>>>"Aaron Allen" <know-spam@not_here.dude> wrote:
>>>>>
>>>>>>FreakQ is the one that seemed to cause the most issues I believe, and

>>>>>>it
>>>>>
>>>>>>seemed like there was a little 3 pack that had something in it that

>>>>>>created
>>>>>
>>>>>>issues, name escapes me at the moment. Define "all" of them that you
>>>>>>installed and I can likely pick the one out.
>>>>>>
>>>>>>AA
>>>>>>
>>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>>news:467fb883$1@linux...
>>>>>>
>>>>>>>I had installed all of the skunkworks plugs - I removed all but the
>>>>>>>eventiter and the mods.
>>>>>>>
>>>>>>>I really love the plugs and as time permits, I'll start adding them
in
>>>>>
>>>>>>>again until I isolate which one was causing the problem on my
>>>>>>>computer.
>>>>>>>
>>>>>>>
>>>>>>>"Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>>>>>news:467ea667@linux...
>>>>>>>
>>>>>>>>I hadn't seen that reaction yet, but I think some of the skunkworks

>>>>>>>>plugs
>>>>>
>>>>>>>>were deemed too buggy and it was suggested to not install them. Which
>>>>>
>>>>>of
>>>>>
>>>>>>>>them did you have installed?
>>>>>>>>
>>>>>>>>AA
>>>>>>>>
>>>>>>>>
>>>>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>>>>news:467e51e8@linux...
>>>>>>>>
>>>>>>>>>I sure appreciate all the helpful tips posted here and wanted to

>>>>>>>>>share
>>>>>
>>>>>>>>>that I found the solution to a problem when I migrated Paris to

>>>>>>>>>Windows
>>>>>
>>>>>>>>>XP Pro.
>>>>>>>>>
>>>>>>>>>The problem was that the EDS compressors were not working for the
>>>>>>>>>channel inserts. It was frustrating since I really like using them

>>>>>>>>>and
>>>>>
>>>>>>>>>all the other insert efx were working.
>>>>>>>>>
>>>>>>>>>I'm a big fan of Chuck's plugins and had installed all of them.
>>>>>>>>>Unfortunately, on my box, there was a conflict. When I removed all

>>>>>>>>>but
>>>>>
>>>>>>>>>the basic EDS effects dlls from the system32 folder the compressors
>>>>>
>>>>>>>>>worked again.
>>>>>>>>>
>>>>>>>>>I still have the eventiter and modulation efx working so that good

>>>>>>>>>since
>>>>>
>>>>>>>>>I like them alot too.
>>>>>>>>>
>>>>>>>>>Anyways, since I had posted in the midst of my confusion, thought
I
>>>>>
>>>>>post
>>>>>
>>>>>>>>>the solution too.
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>>
>
Previous Topic: Benchmark DAC or clock
Next Topic: Free Impulses for SIR ?
Goto Forum:
  


Current Time: Thu Dec 05 06:07:49 PST 2024

Total time taken to generate the page: 0.01598 seconds