The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Violet mics?
Violet mics? [message #56861] Sat, 13 August 2005 08:38 Go to next message
DT is currently offline  DT
Messages: 42
Registered: July 2005
Member
st of our research and development, are still
managed by Martins Saulespurens in Latvia. Most importantly, all our
products are still Blue's unique designs.


Finally, Juris Zarins and Scruples had nothing to do with Blue?s
restoration service. Our restoration service particularly inhibited
the production output of our Bottle microphone; we therefore
discontinued the service in order to fully concentrate on the Bottle
and other Blue products. We can only guess that JZ Equipment says they
offer restoration services because that?s what Blue had done.


We hope this information has proven helpful, and would like to thank
you all very much for your interest in what the future holds for
Blue Microphones. For our part, we are very proud to have served this
industry for ten years now, and can?t wait to bring even better
solutions to the recording industry for another ten years ? and
beyond!


Thanks,
Ari Soudak


"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:42fe36ca@linux...
> Dedric..........here's the complete skinny on this whole Blue vs Violet
> thing from Blue's perspective. Sounds pretty legit to me.
>
>
http://www.a
Re: Violet mics? [message #56862 is a reply to message #56861] Sat, 13 August 2005 11:08 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
udio-forum.net/pro/BLUE_mic_vs_Violet_the_offici al_response_1033
> 051.html
>
>
> "DTerry" <dterry@no_spamkeyofd.net> wrote in message
> news:BF23700A.3A49%dterry@no_spamkeyofd.net...
> > Anyone tried Violet's line of mics? The maker claims to be the original
> Blue
> > mic designer - apparently a falling out, and they seem to be at war now.
> >
> > I checked out the site and now get newsletter emails from them. Here's
an
> > excerpt:
> >
> > "Indeed, yesterday we set up a 10-day eBay auction for Violet Design
> > Flamingo Junior. Starting bid was $0.01 We got over 30 bids on this item
> and
> > had many, many watchers!
> >
> > Today this eBay item was removed because blue decided that they can use
> eBay
> > VeRO program to remove anyone who tries to be competition to their "new
> > great sounding Chinese" knock-offs. Sorry guys, but we do not compete
with
> > Chinese manufactures. A Rolls-Royce is a Rolls and a Hyundai is just
that.
> > Please, do not devaluate JZ's designs with 10-dollar Chinese capsules.
> >
> > And by the way, the Flamingo Junior was released early in 2005; quite a
> > while after JZ's factory stopped sales to the Blue. Now, it seems that
> blue
> > and Martins Saulspurens is trying to claim rights to anything their
> > ex-employer Juris Zarins has designed or will ever design to be blue
> > property. Could anyone imagine something more absurd, completely
inhuman,
> > immoral and utterly wrong?"
> >
> > Any truth to this (in that it only implies either great mics, or illegal
> > copies on one side or the other)? Either way I'm more interested in
> quality
> > mics than turf wars. I've always liked Blue mics, but only recently
heard
> > of Violet.
> >
> > Regards,
> > Dedric
> >
>
>Thanks
Re: Violet mics? [message #56864 is a reply to message #56862] Sat, 13 August 2005 12:29 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
oday because of stem cell treatment he received a few years ago.
Best
> wishes for you both.
>
> On 12-Aug-2005, "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>
> > I have talked to John Peluso about these mics. He mentioned that the
> > design
> > was based on a Shoeps circuit (CMC 5 amp IIRC). He said that they are
> > getting a lot of use on film sets where the Shoeps mics have been a
staple
> > item for years............sorta' suck actually. I'
I'm getting ready to do my first ful album mix using this technique. I'm
batch processing a 14 song project, song by song across a network using
Wavelab 5.0.

what this involves is:

1. Editing the tracks and then rendering all .paf's in each song to have
00:00:00 start points.

2. Batch processing them to .wav files in WL

3. Importing each .wav file into the appropriate track in a Cubase SX
project so that it's playing back through the Paris submix I want so that I
can take advantage of my outboard reverbs which are patched in digitally
*per submix*. (the patchbay setups to stream from SX to Paris are already
saved as templates in the respective programs so that's not a big deal)

4. Deleting the Tracks in the SX project I'm not using (again......no big
deal, but another step nonetheless).

Once this is done, it's just a matter of bringing up the faders in SX,
applying my processors and I'm ready to start mixing.

The advantages to this are that all of my outboard and UAD-1 and other VST
plugins are automatically delay compensated.

The disadvantages are that it takes about 2 - 3 hours to get ready to mix a
project of this size whereas I could be up and running in much less time if
I was using the UAD-1 cards in my Paris rig. Still, there would be manual
delay compensation issues galore with UAD-1 and using external gear on the
inserts because there is mic bleed all over the tracks in this project.

Maybe the time spent getting the project ready for mixing in SX > Paris
would be a wash when taking into account all of the manual delay
compensation moves I would have to do per track/per song in Paris using UAD
plugs and external gear, but it sure seems like a long setup
process.......but I guess not nearly as long as splicing and then spooling
up multiple reels of 2" tape.

But anyway.......it's a bit of a hassle.........gripe..... grumble.

Deej the curmudgeon.It's funny about cables. I've got my entire rack wired with Mogami and was
running Mogami direct from my mics to my preamps. Should be an optimal
situation with mic tio pre runs of 50' max, right? Well, I tried an
experiment wth an old (circa 70's?) Whirlwind Medusa 100' long from my
preamp inputs to a stage box out in my tracking room. I mean, this thing is
*old*, but is in great shape and built like a brick shithouse. I bought it
out of a club in NYC where it had been part of a permanent install. I'm
liking the sound of this 100' Medusa cable run plus the actual distance of
the mic cables that are feeding it as much or better than I was getting from
the Mogami cable feeding directly from the mics to the preamps. Go figure.

I'll probably wire myself up a similar stage box using 24 pair Mogami at
some point in the future, but I'm wondering if it will sound any better

Deej

"DC" <DC@cablehell.org> wrote in message news:42fbf4c0$1@linux...
>
> Hah!
>
> Hey a client of ours actually specified a 300 foot run of Canare
> Quad in front of the mic pres...
>
> Think he's got anything at all over 10K? Think there's any
> group delay?
>
> arrgghhhh
>
> But the client is always right, right?
>
> DC
>
>
> EK Sound <spamnot.info@eksoundNO.com> wrote:
> >That's a good thing though... it'll smooth out them screeeechy fiddles
> >you record! ;-)
> >
> >David.
> >
> >DC wrote:
> >> We are moving away from Canare because of the high capacitance.
> >> At long runs, it rolls off the extreme highs.
> >>
> >> For 25' mic cords it shouldn't be an issue.
> >>
> >> DC
> >>
> >>
> >> "W. Mark Wilson" <wmarkwilson@verizon.net> wrote:
> >>
> >>>Markertek's got the L4E6S Canare Quad Star at almost half the price of
> the
> >>
> >>
> >>>W2549 Mogami; priced by the foot.
> >>>
> >>>Dubya
> >>>
> >>>"DC" <DC@steenkingbadgers.com> wrote in message
news:42f86edd$1@linux...
> >>>
> >>>>The source, receiving unit, and input/output impedance are
> >>>>much more important than the cable. With mics, with proper
> >>>>termination, cables don't make as big a difference as with guitars.
> >>>>
> >>>>Having said that, recording orchestras will show you quickly that
> >>>>even a little change can make a difference.
> >>>>
> >>>>I like Cardas, Zaolla, and Mogami mic cables, but I would look at the
> >>>>whole signal chain before buying an expensive cable. (the Mogami
> >>>>W2549 is not expensive and is very good, the others are good but
> >>>>very expensive)
> >>>>
> >>>>Where can I find good Greek food in Los Angeles??
> >>>>
> >>>>:-]
> >>>>
> >>>>DC
> >>>>
> >>>>
> >>>>DImitrios <musurgio@otenet.gr> wrote:
> >>>>
> >>>>>I have used for the last 4 years Ramtech cable and I am striving to
> get
> >>>>
> >>>>>that warm sound I used to get when I was using in my older studio
Klotz
> >>>>
> >>>>>cable.
> >>>>>I am definetely sure that the cabling is responsible for that.
> >>>>>I get now this trebly zingy kind of sound when with Klotz I had a
> >>>>>flatter warmer sound.
> >>>>>Anyone sharing any thoughts tests on this matter ?
> >>>>>Any suggestion as per cable brand ?
> >>>>>Regards,
> >>>>>Dimitrios
> >>>>
> >>>
> >>
>Thanks DJ. That does sound legit. As long as Blue's quality and designs
are as consistent as pre 2004, that's enough for me.

Regards,
Dedric

On 8/13/05 12:08 PM, in article 42fe36ca@linux, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:

> Dedric..........here's the complete skinny on this whole Blue vs Violet
> thing from Blue's perspective. Sounds pretty legit to me.
>
> http://www.audio-forum.net/pro/BLUE_mic_vs_Violet_the_offici al_response_1033
> 051.html
>
>
> "DTerry" <dterry@no_spamkeyofd.net> wrote in message
> news:BF23700
Re: Violet mics? [message #56869 is a reply to message #56862] Sat, 13 August 2005 15:42 Go to previous messageGo to next message
DT is currently offline  DT
Messages: 42
Registered: July 2005
Member
t long runs, it rolls off the extreme highs.
>> >>
>> >> For 25' mic cords it shouldn't be an issue.
>> >>
>> >> DC
>> >>
>> >>
>> >> "W. Mark Wilson" <wmarkwilson@verizon.net> wrote:
>> >>
>> >>>Markertek's got the L4E6S Canare Quad Star at almost half the price
of
>> the
>> >>
>> >>
>> >>>W2549 Mogami; priced by the foot.
>> >>>
>> >>>Dubya
>> >>>
>> >>>"DC" <DC@steenkingbadgers.com> wrote in message
>news:42f86edd$1@linux...
>> >>>
>> >>>>The source, receiving unit, and input/output impedance are
>> >>>>much more important than the cable. With mics, with proper
>> >>>>termination, cables don't make as big a difference as with guitars.
>> >>>>
>> >>>>Having said that, recording orchestras will show you quickly that
>> >>>>even a little change can make a difference.
>> >>>>
>> >>>>I like Cardas, Zaolla, and Mogami mic cables, but I would look at
the
>> >>>>whole signal chain before buying an expensive cable. (the Mogami
>> >>>>W2549 is not expensive and is very good, the others are good but
>> >>>>very expensive)
>> >>>>
>> >>>>Where can I find good Greek food in Los Angeles??
>> >>>>
>> >>>>:-]
>> >>>>
>> >>>>DC
>> >>>>
>> >>>>
>> >>>>DImitrios <musurgio@otenet.gr> wrote:
>> >>>>
>> >>>>>I have used for the last 4 years Ramtech cable and I am striving
to
>> get
>> >>>>
>> >>>>>that warm sound I used to get when I was using in my older studio
>Klotz
>> >>>>
>> >>>>>cable.
>> >>>>>I am definetely sure that the cabling is responsible for that.
>> >>>>>I get now this trebly zingy kind of sound when with Klotz I had a
>> >>>>>flatter warmer sound.
>> >>>>>Anyone sharing any thoughts tests on this matter ?
>> >>>>>Any suggestion as per c
Re: Violet mics? [message #56878 is a reply to message #56869] Sun, 14 August 2005 01:35 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
//www.3daudioinc.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=1&t=001396" target="_blank"> http://www.3daudioinc.com/cgi-bin/ultimatebb.cgi?ubb=get_top ic&f=1&t=001396
>
>
>
>
> "DTerry" <dterry@no_spamkeyofd.net> wrote in message
> news:BF23D358.3A58%dterry@no_spamkeyofd.net...
>> Thanks DJ. That does sound legit. As long as Blue's quality and designs
>> are as consistent as pre 2004, that's enough for me.
>>
>> Regards,
>> Dedric
>>
>> On 8/13/05 12:08 PM, in article 42fe36ca@linux, "DJ"
>> <animix_spam-this-ahole_@animas.net> wrote:
>>
>>> Dedric..........here's the complete skinny on this whole Blue vs Violet
>>> thing from Blue's perspective. Sounds pretty legit to me.
>>>
>>>
> http://www.audio-forum.net/pro/BLUE_mic_vs_Violet_the_offici al_response_1033
>>> 051.html
>>>
>>>
>>> "DTerry" <dterry@no_spamkeyofd.net> wrote in message
>>> news:BF23700A.3A49%dterry@no_spamkeyofd.net...
>>>> Anyone tried Violet's line of mics? The maker claims to be the original
>>> Blue
>>>> mic designer - apparently a falling out, and they seem to be at war
> now.
>>>>
>>>> I checked out the site and now get newsletter emails from them. Here's
> an
>>>> excerpt:
>>>>
>>>> "Indeed, yesterday we set up a 10-day eBay auction for Violet Design
>>>> Flamingo Junior. Starting bid was $0.01 We got over 30 bids on this
> item
>>> and
>>>> had many, many watchers!
>>>>
>>>> Today this eBay item was removed because blue decided that they can use
>>> eBay
>>>> VeRO program to remove anyone who tries to be competition to their "new
>>>> great sounding Chinese" knock-offs. Sorry guys, but we do not compete
> with
>>>> Chinese manufactures. A Rolls-Royce is a Rolls and a Hyundai is just
> that.
>>>> Please, do not devaluate JZ's designs with 10-dollar Chinese capsules.
>>>>
>>>> And by the way, the Flamingo Junior was released early in 2005; quite a
>>>> while after JZ's factory stopped sales to the Blue. Now, it seems that
>>> blue
>>>> and Martins Saulspurens is trying to claim rights to anything their
>>>> ex-employer Juris Zarins has designed or will ever design to be blue
>>>> property. Could anyone imagine something more absurd, completely
> inhuman,
>>>> immoral and utterly wrong?"
>>>>
>>>> Any truth to this (in that it only implies either great mics, or
> illegal
>>>> copies on one side or the other)? Either way I'm more interested in
>>> quality
>>>> mics than turf wars. I've always liked Blue mics, but only recently
> heard
Re: Violet mics? [message #56886 is a reply to message #56878] Sun, 14 August 2005 09:07 Go to previous message
DT is currently offline  DT
Messages: 42
Registered: July 2005
Member
DAT
> like that without clocking.
>
>Hi,

Sorry to trouble y’all again but I’m having some problems with Paris 3 on
XP and am pulling out what remains of my hair. System details below. I’ve
been running Paris on 98 / ME since 1998 and have done several installs (probably
about 8 on ME/98 SE), but this is my first XP boot (actually second, since
it was unstable the first time… and still is now).

1) With 1 card running, the system was unstable. It would sometimes crash,
particularly when opening a project after having closed another project.
Sometimes a crash would trigger the machine to reboot (i.e. just reset it).
Equally (perhaps even more!) frustratingly, EDS effects presets (even in
the main library) would not save when Paris was rebooted. Other than that,
everything was fine.

2) Having added a second recently purchased second-hand card, I’m now getting
Error 2/2 messages when I start Paris. On a few occasions the 2/2 message
did not appear, but once Paris was started no audio would play back from
the project. Audio on Card A would show on the meters (channel, submix and
master); audio on Card B would show on the channel meters, but not in the
submix or master meters).

Is it possible that the EDS to EDS ribbon cables are at fault? They are homemade…
I’ve connected one 10 pin to the same 10 pin slot on the other card, and
the 16 pin ones are in an X. For all ribbon cables, the cable that would
be red (but isn’t as it’s homemade from an IDE cable and new ends) runs from
the left of the slot of one card to the left of the slot of the other card
(hope that makes sense!).

I’ve since tried swapping the cards around into the other ones PCI slot (no
joy). I’ve also tried disabling one EDS (only) at a time in Device Manager
and then launching Paris. I either get Error 2/2 (on one card) or Error 1/1
(on the other).

I may have to go back to ME! Although I’d like to run a system with more
Ram (1.5+ Gb) for plug-ins, and I believe ME can’t take advantage of this.


In the meantime, I may try removing the disabled Oasys cards and putting
the EDS cards in different PCI slots, testing one at a time with the MEC
to see if the work.

System:
1 MEC (8 in, 8 out, adapt); Windows XP Pro; Asus A7V880; 1 Gig ram; Athlon
3000 XP; Radeon VE dual-head agp graphics; Eds cards installed in PCI slots
2 and 3. Slot 4 has Korg Oasys (disabled). Other slots (including PCI slot
1) empty. I also have a 442 but this is not plugged into the system.

Many thanks in advance for any advice or suggestions.

DanielNo problem. Assuming I can get my presets to actually save from reboot to
reboot in XP, in about a week or so I'll e-mail Mike a ppj with the presets
in. There won't be any new ones, just a couple of reverb and comp settings
collected from the NG over the years.

Dan

"Ted Fay" <ted@8x.com> wrote:
>I'd be very interested.
>
>Thanks!
>
>-ted
>
>"db" <daniel_burneNOSPAM@yahoo.com> wrote in message
>news:42f734d7$1@linux...
>>
>> Spotted this
>> ( http://news.parisnewsgroup.com/cgi-bin/dnewsweb?cmd=article& amp;group=IDEA.EMUEnsoniqPARIS&item=127221&utag=
>> - about FX presets not saving when re-opening Paris on XP) on the Paris

>> newsgroup
>> from about 18 months ago. Now that I've migrated to XP I'm having the
same
>> problem, and was wondering if anyone (Manic?) found a way to solve it.
>>
>> Since I've now lost a bunch of my presets, I'm also keen to get hold of

>> some
>> new ones. It'd be great if you got any tasty ones to share - I know Mike
>> Audet has set up a sharing resource for Paris presents, and could forward
>> them on to him if you'd like. I've also collected the reverb presets from
>> the group over the years and could post them as a ppj if anyone's
>> interested.
>>
>>
>> Many thanks in advance for any assistance.
>>
>> Best wishes,
>>
>> Daniel
>
>Jason, whose playing with you? I'm up in Albany but will try to make a trip
down.

Ciao,
Rich

Man count thy days,
and if perchance they fly too fast,
for thy dull thoughts to count,
count every day thy last.

Henton Londini - Anno Dom 1605

"Jason Miles" <Jmiles45@aol.com> wrote in message news:42f194d2$1@linux...
>
> Don't know whether anybody here lives in NY or Philly but I'm playing live
> every thursday Night in August at The Makor in NYC
> 4,11,18,25 at 8PM-we play the songs from My Cd Miles to MIles,
> In the Spirit of Miles Davis (recorded and mixed on Paris)
> 35 west 67th street
> also At The World Cafe Live in Phil,Pa on August 17th. The band is
> totally Killer with the best musicians that We have in NYC
> JMThi
Previous Topic: mic cable sound any oppinions ?
Next Topic: master external loop
Goto Forum:
  


Current Time: Tue Nov 26 06:20:25 PST 2024

Total time taken to generate the page: 0.01991 seconds