The PARIS Forums


Home » The PARIS Forums » PARIS: Main » High Sampling Rates and Hearing
High Sampling Rates and Hearing [message #58891] Sun, 09 October 2005 16:42 Go to next message
emare is currently offline  emare
Messages: 1
Registered: October 2005
Junior Member
plugin instance.
> >> >> >Regards,
> >> >> >Dimitrios
> >> >> >
> >> >> >
> >> >>
> >> >
> >> >
> >>
> >
> >
>Yesterday I was doing some location work recording a panel discussion of
some heavyweight film songwriters/scorers/producers and publishers who
specialize in placing music with film editors and producers.

The issue of higher sample rates and 5.1 mixing came up. The only place
higher sample rates were preferred were for ftp'ing MP3's to the publisher
for listening sessions prior to sending on the finished *stereo/44.1* final
mixes subsequent to approval of the song. Seems that ther
Re: High Sampling Rates and Hearing [message #58894 is a reply to message #58891] Sun, 09 October 2005 18:35 Go to previous messageGo to next message
DC is currently offline  DC
Messages: 722
Registered: July 2005
Senior Member

> let alone red-book. I disagree. Right now, there are iPods with 60
> gigabytes!
>
> Now, a CD can only 700meg, so we could easily have iPods holding
> 86+ CD's of uncompressed audio! No MP3 crap! It's mainly an
> access speed issue at this point, but I think it will happen, and then
> hi-res will follow.
>
> DC
>
>
> "Mike R." <emare@not.com> wrote:
> >
> >You know, I have read some reports that people actually percieve a
difference
> >between audio sampled at 44k, and audio sampled at 96k. I don't have any
> >96k converters, or I'd give it a shot myself. In all things audio, I'd
> trust
> >this group's ears over
> >m(any) others.
> > If it is audible I'd propose three possiblities:
> >-Our ears are much more sensitive than perviously thought or measured.
(I'd
> >tend to doubt this one...)
> >-We do "hear" the higher frequencies, but with senses other than our
ears.
> > Perhaps our skin, or fine hair on the skin. Much like someone who is
deaf
> >"listens" to music, we are able to percieve the higher frequencies.
> >or...
> >-Its a sort of placebo effect. We think it's there, so it's there.
> >Any thoughts???
> >MR
>Sort of on this topic, anyone notice how bad radio is sounding lately?
Even the Beatle hour is bad "you can't do that" sounded like a real audio
file or something.
I load my Ipod on the highest rate before Apple lossless.

"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Yesterday I was doing some location work recording a panel discussion of
>some heavyweight film songwriters/scorers/producers and publishers who
>specialize in placing music with film editors and producers.
>
>The issue of higher sample rates and 5.1 mixing came up. The only place
>higher sample rates were preferred were for ftp'ing MP3's to the publisher
>for listening sessions prior to sending on the finished *stereo/44.1* final
>mixes subsequent to approval of the song. Seems that there is some voodoo
>that these folks think they are hearing when MP3's are upsampled to 192kHz.
>I've never done this so maybe there is some validity to it, but anyway,
they
>like having it done this way. As far as the final audio product that is
>heard in the film is concerned, 5.1 and higher sample rates aren't taking
>the world by storm.......not even a little.
>
>Deej
>
>"DC" <dc@spamyermama.com> wrote in message news:4349c570$1@linux...
>>
>> Here's my .02
>>
>> 1. Everything has to be equal. *Almost always* when someone
>> complains about digital it is because of cheap convertors or bad
>> engineering. Compare the same convertor at different resolutions
>> and you can hear some difference. I've done this with a Lavry and
>> it is real, but of smaller magnitude of improvement than most people
>> expect.
>>
>> The existence of so many recordings transferred back in the 80's
>> on the wretched convertors in the Sony 1630/40 mastering decks
>> is still causing complaints about "digital harshness".
>>
Re: High Sampling Rates and Hearing [message #58896 is a reply to message #58894] Sun, 09 October 2005 19:30 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
en, and then
>> hi-res will follow.
>>
>> DC
>>
>>
>> "Mike R." <emare@not.com> wrote:
>> >
>> >You know, I have read some reports that people actually percieve a
>difference
>> >between audio sampled at 44k, and audio sampled at 96k. I don't have
any
>> >96k converters, or I'd give it a shot myself. In all things audio, I'd
>> trust
>> >this group's ears over
>> >m(any) others.
>> > If it is audible I'd propose three possiblities:
>> >-Our ears are much more sensitive than perviously thought or measured.
>(I'd
>> >tend to doubt this one...)
>> >-We do "hear" the higher frequencies, but with senses other than our
>ears.
>> > Perhaps our skin, or fine hair on the skin. Much like someone who is
>deaf
>> >"listens" to music, we are able to percieve the higher frequencies.
>> >or...
>> >-Its a sort of placebo effect. We think it's there, so it's there.
>> >Any thoughts???
>> >MR
>>
>
>DJ,

Are you sure they didn't mean 192kbps mp3 encoding vs 128kbps encoding?
That would make sense in the context.

And for DC: I think the lossless codecs (Apple's and FLAC for example) are
a good way to go for portables. I guess the problem is that a lot of consumers
can't hear the difference between 192kbps mp3 or AAC in their environments...

And about those amp designers, what analog recording format (or more importantly,
what consumer playback medium) in the past had response out to 250k?

Regardless, I think it's always going to be a battle where convenience wins
out over fidelity in consumer audio. And as long as it sounds "good enough"
to the consumer, that's a good thing for music when people want to listen
and can do it where they like. It remains a part of their lives and thus
lets us live ours.

;)

Regards,

Graham

"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Yesterday I was doing some location work recording a panel discussion of
>some heavyweight film songwriters/scorers/producers and publishers who
>specialize in placing music with film editors and producers.
>
>The issue of higher sample rates and 5.1 mixing came up. The only place
>higher sample rates were preferred were for ftp'ing MP3's to the publisher
>for listening sessions prior to sending on the finished *stereo/44.1* final
>mixes subsequent to approval of the song. Seems that there is some voodoo
>that these folks think they are hearing when MP3's are upsampled to 192kHz.
>I've never done this so maybe there is some validity to it, but anyway,
they
>like having it done this way. As far as the final audio product that is
>heard in the film is concerned, 5.1 and higher sample rates aren't taking
>the world by storm.......not even a little.
>
>DeejOn Sun, 9 Oct 2005 17:26:28 -0600, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:

>In order for this to be really effective, you need to record nothing, copy
>this to an adjacent track, invert the phase and then do a bounce.
>
>;oP
>
Now, that be some well-crafted nothing!

yeah-- ChasThat brings back to mind my attempt to save a buck when I was about 16. This
was about 1988, and I had myself a decent strat copy with at least one seymour
suncan pickup and a nice neck, and had discovered the wonders od distortion
via a cheap knock off of the Boxx DS1 I had, which was a PSK pedal from memory.
Not too shabby either. I wanted to move up to the world of delay, and of
course all the talk was about digital delay, but such pedals went for $250+
whereas my budget was only about $120. I managed to find however an electronics
shop which sold a digital delay kit for around that price. Suffice to say
a week later all I had was a plastic box containing a bunch of (wrongly built)
circuits which did nothing whatsoever, and $120 had gone down the tube...

That may well have been my worst gear purchase ever when I think about it.

Cheers,
Kim.

"DC" <dc@spamviagra.com> wrote:
>
>Seemed like the slutz were having some fun with that thread.
>
>
>What's your worst gear purchase?
>
>I'll go first.
>
>1969 My first electric guitar. Went to a thrift shop and there was a
>Jazzmaster that looked cool. Only 55.00! So, I sold a bunch of
>stuff and bought it. It needed a knob so I took it to the local
>Fender dealer and his service guy about fell off his c
Re: High Sampling Rates and Hearing [message #58897 is a reply to message #58896] Sun, 09 October 2005 19:42 Go to previous messageGo to next message
Cujjo is currently offline  Cujjo   
Messages: 325
Registered: June 2007
Senior Member
hair. It was
>a cheap knockoff (Fender decal and all) from the Phillipines!
>(evidently some of the servicemen buy them and bring them back)
>
>No truss rod, green wood in the neck, wavy plastic on the pickguard.
>
>Total POS. Worth nothing.
>
>ArrgGGGGGHHHHH...
>
>I'm 16 right, and know nothing about guitars, but I do know I am
>in a world of caca, and now I have no money.
>
>So, I go back to the thrift store, having cooked up a story about
>having sold something that wasn't mine and now I am in trouble, and
>the guy gave me my 55.00 back...
>
>Whew...
>
>Went and bought a real Fender (Jaguar this time) and finally got my
>heartbeat down to 195 or so....
>
>DC"DC" <dc@spamviagra.com> wrote:
>
>Seemed like the slutz were having some fun with that thread.
>
>
>What's your worst gear purchase?
>
>I'll go first.
>
>1969 My first electric guitar. Went to a thrift shop and there was a
>Jazzmaster that looked cool. Only 55.00!

A guitar was possibly my worst purchase too... only this one
was a real Fender - a 1972 Telecaster Deluxe. Bought in
like '80-'81 or so. What a POS!
I don't even know to describe the extent to what a POS it was
except to say it was a complete, total, and utter POS. Anyone
who owns one should burn it. Sacrifice it to the gods of shitty
guitars in hopes that someday they'll reward you with a Univox
Mosrite copy in return LOL!

Neili was lusting after a SG custom and finally got one. at the time it
cost me 1200.00 (around 1979) at Guitar Trader in Red Bank. i should
have know better when i couldn't tune it at the store. "oh, it only
needs a setup." yeah... 3 months later the neck separated at the
joint.

another one... i traded my 65 polar white, SG Jr. for a Larivee
"super strat." pointy headstock and all. was actually a very nice
guitar, neck through and all, but very 80's and ugh... when i think of
how nice that SG was. oh well.

:)

On 10 Oct 2005 10:44:09 +1000, "DC" <dc@spamviagra.com> wrote:

>
>Seemed like the slutz were having some fun with that thread.
>
>
>What's your worst gear purchase?
>
>I'll go first.
>
>1969 My first electric guitar. Went to a thrift shop and there was a
>Jazzmaster that looked cool. Only 55.00! So, I sold a bunch of
>stuff and bought it. It needed a knob so I took it to the local
>Fender dealer and his service guy about fell off his chair. It was
>a cheap knockoff (Fender decal and all) from the Phillipines!
>(evidently some of the servicemen buy them and bring them back)
>
>No truss rod, green wood in the neck, wavy plastic on the pickguard.
>
>Total POS. Worth nothing.
>
>ArrgGGGGGHHHHH...
>
>I'm 16 right, and know nothing about guitars, but I do know I am
>in a world of caca, and now I have no money.
>
>So, I go back to the thrift store, having cooked up a story about
>having sold something that wasn't mine and now I am in trouble, and
>the guy gave me my 55.00 back...
>
>Whew...
>
>Went and bought a real Fender (Jaguar this time) and finally got my
>heartbeat down to 195 or so....
>
>DCI have a couple of non working EDS cards (and no I did not burn them with
EDSTransfer string)
These have been bought as is for spare parts.
Because I am located in Greece it is cost prohibited to send cards aboard
for propable fix.
So with my audio engineer I could fix some here.
Would anybody kindly share these schematics ?
I know someone outhee got them...
The Ensoniq guy ( I understand why) did not reply on this.
regards,
Dimitrios"Graham Duncan" <graham@grahamduncan.com> wrote:

>And about those amp designers, what analog recording format (or more importantly,
>what consumer playback medium) in the past had response out to 250k?


It wasn't the frequency response of the source material being that high,
it was the need for the amp circuitry to be able to go that
high so that the leading edge of transients would be reproduced
without any rounding off of the waveform. Deane Jensen wrote
a paper on this years ago. I'll see if I can find a copy of it.


DCD,
Long story short is that when Ensoniq was bought out by Emu and Creative,
lots of heads rolled. A good deal of hostility ensued. Papers vanished,
mysteriously, and *no one seems to know where they went*.. the why is
obvious when you think about it from a creators standpoint. If there are
indeed roadmaps on the EDS cards I would be most definitely interested
should you come across them.. but I hold little hope at this late stage in
the public release of those documents.

AA


"Dimitrios" <musurgio@otenet.gr> wrote in message news:434a13c0$1@linux...
>I have a couple of non working EDS cards (and no I did not burn them with
> EDSTransfer string)
> These have been bought as is for spare parts.
> Because I am located in Greece it is cost prohibited to send cards aboard
> for propable fix.
> So with my audio engineer I could fix some here.
> Would anybody kindly share these schematics ?
> I know someone outhee got them...
> The Ensoniq guy ( I understand why) did not rep
Re: High Sampling Rates and Hearing [message #58898 is a reply to message #58896] Sun, 09 October 2005 21:53 Go to previous messageGo to next message
Graham Duncan is currently offline  Graham Duncan   
Messages: 147
Registered: December 2008
Senior Member
ly on this.
> regards,
> Dimitrios
>
>Has to be the Roland tr707 drum box.
I could have bought a *lame sounding* 909 for a blowout price at the time,
but noooo....
I wanted the latest and greatest.
And great it was, for about two months. I now use it's rimshot as
a click soundsource when a drummer requires one.
I reckon the 909 still sounds lame, but hey, I could have made a truckload
of money... if only.....


"DC" <dc@spamviagra.com> wrote:
>
>Seemed like the slutz were having some fun with that thread.
>
>
>What's your worst gear purchase?
>
>I'll go first.
>
>1969 My first electric guitar. Went to a thrift shop and there was a
>Jazzmaster that looked cool. Only 55.00! So, I sold a bunch of
>stuff and bought it. It needed a knob so I took it to the local
>Fender dealer and his service guy about fell off his chair. It was
>a cheap knockoff (Fender decal and all) from the Phillipines!
>(evidently some of the servicemen buy them and bring them back)
>
>No truss rod, green wood in the neck, wavy plastic on the pickguard.
>
>Total POS. Worth nothing.
>
>ArrgGGGGGHHHHH...
>
>I'm 16 right, and know nothing about guitars, but I do know I am
>in a world of caca, and now I have no money.
>
>So, I go back to the thrift store, having cooked up a story about
>having sold something that wasn't mine and now I am in trouble, and
>the guy gave me my 55.00 back...
>
>Whew...
>
>Went and bought a real Fender (Jaguar this time) and finally got my
>heartbeat down to 195 or so....
>
>DCA thread about *nothing*

Who will watch it?


El Miguel



"Chas. Duncan" <dun
Re: High Sampling Rates and Hearing [message #58904 is a reply to message #58898] Mon, 10 October 2005 00:37 Go to previous messageGo to next message
dc[3] is currently offline  dc[3]
Messages: 895
Registered: September 2005
Senior Member
ple delay (Try this instead of AnalogX DX
plugin because you have the 64 plugin limit and with VST plugins NO LIMIT
Then put inside latency plugin 384 samples to the right.
Thus all processed tracks will be alligned to reverb return on tracks.

That is for now.
Please ask questions so I can see where I did my wrong homework...
Regards,
DimitriosHello DM (Scott)?

Chuck Duffy has moved on to other activities in the past year. Did you paid
for the Brian Tankersley DVD and did not receive it? If so, start a new
thread
with that topic and maybe Aaron Allen can help out. AA was the videographer
and spent a huge a
Re: High Sampling Rates and Hearing [message #58914 is a reply to message #58891] Mon, 10 October 2005 07:41 Go to previous messageGo to next message
emarenot is currently offline  emarenot
Messages: 345
Registered: June 2005
Senior Member
.Might check Clarion too.
Heritage looks like no deductibles which is nice.

TIA,
PeteI think this would have more to do with slew rate than
frequency response..

David.

DC wrote:
> "Graham Duncan" <graham@grahamduncan.com> wrote:
>
>
>>And about those amp designers, what analog recording format (or more importantly,
>>what consumer playback medium) in the past had response out to 250k?
>
>
>
> It wasn't the frequency response of the source material being that high,
> it was the need for the amp circuitry to be able to go that
> high so that the leading edge of transients would be reproduced
> without any rounding off of the waveform. Deane Jensen wrote
> a paper on this years ago. I'll see if I can find a copy of it.
>
>
> DC>13. FFX-4 also has a low 4096 samples latency for UAD plugz. If you think
that is big note that FXpansion wrapper that you g
Re: High Sampling Rates and Hearing [message #58916 is a reply to message #58897] Mon, 10 October 2005 08:24 Go to previous messageGo to next message
Chris Latham is currently offline  Chris Latham   UNITED STATES
Messages: 109
Registered: June 2005
Senior Member
ly
> >VST
> >HINT: From inside Chainer you can use FFX-4 so have chainer to wrap DX
and
> >VST....
> >
> >13. FFX-4 also has a low 4096 samples latency for UAD plugz. If you think
> >that is big note that FXpansion wrapper that you guys were using gives
16384
> >samples of latency !!
> >
> >14. So you wrap senderella with Spinaudiolite.
> >
> >15. You put senderella on the audio tracks you wanna send to a reverb,
put
> >the send volume accordingly and redirect (full to the right) because
> >Spinaudio mixes two times the sound of the track)
> >
> >16. On audio tracks 15 and 16 you put two 16bit empty long files (5
minutes
> >or more,whatever)
> >17. On track 15 you open as STEREO the senderella again (spinaudiolite
> >wrapped) and put senderella as receiver .
> >Then on next native slot you open FFX-4 on track 15 as STEREO again.
> >
> >18. You open from inside FFX-4 a UAD1 reverb or any other DX reverb (like
> >DSPFX)
> >If you put UAD1 rvereb you get 4096 latency.
Re: High Sampling Rates and Hearing [message #58919 is a reply to message #58904] Mon, 10 October 2005 09:51 Go to previous messageGo to next message
audioguy_nospam_ is currently offline  audioguy_nospam_   CANADA
Messages: 60
Registered: June 2005
Member
n my old G3 and have forgotten how the
installation process works. I still have my original order number, key number,
and response code, but are they still valid after all these years? And since
Paris is defunct, how and who would authorize the installation? Am I correct
in assuming that I need to connect a modem to the G4 for authorization through
the Internet or could I perform the authorization for my G4 through my old
G3 which does have a modem? (I have dial-up only.) And is there someone at
Ensoniq/E-Mu to perform the authorization or is it simply automated? Sorry
if I sound ridiculously stupid. Any help would be greatly appreciated.
--Richard.........which brings to mind the question, if Paris Hilton is screwing
someone in the woods and a tree falls on them, does it actually make a
sound?



"Miguel Vigil" <
Re: High Sampling Rates and Hearing [message #58926 is a reply to message #58919] Mon, 10 October 2005 10:51 Go to previous message
DC is currently offline  DC
Messages: 722
Registered: July 2005
Senior Member
apper needs for senderella.
>But for full use and potential senderella needs to be wrapped
>
>6. Wrappers that can be used are the FREE Spinaudio lite
=
> http://www.spinaudio.com/downloads.php?download_type=3D3& ;download_id=3D3=
3 which
>can wrap ONLY one VST plugin.
>So here you can wrap one instance of senderella and use it as send =
for
>reverbs.
>If you buy Spinaudio ofcourse you can have as many plugins wrapped =
as you
>want.
>
>7.. Senderella by renaming its dll like send1,send2,send3 etc can =
be used
as
>many times as you want it is that simple.
>
>8. you need to have 16bit files (empty) on the receining senderella
>instances.
>
>9. If you have multiple cards then use (if you want it across =
submixes)
>tracks 15 and 16 of your last card, so that all sending instances =
are bfore
Previous Topic: Damn -What happened to this Forum?
Next Topic: Uad3.9,Paris3.0,MacG4
Goto Forum:
  


Current Time: Sat Nov 30 16:02:23 PST 2024

Total time taken to generate the page: 0.06124 seconds