Home » The PARIS Forums » PARIS: Main » Need a firewire interface recommendation
Need a firewire interface recommendation [message #88509] |
Tue, 24 July 2007 19:39 |
Paul Braun
Messages: 391 Registered: September 2005
|
Senior Member |
|
|
Two friends of mine, who are excellent singer/songwriters, have
started their own production company for commercial music - jingles,
etc., plus recording their own material.
They're using Cubase SX3 plus Reason right now.
They need to step up from the Emu pci card they're using to a better
interface - and I think we all agree they need to go with something
firewire.
I've explained the whole process to them - DAW's are something new in
their experience - and they agree that the modular approach is best
and will allow them to upgrade as they get more money in the company.
So, for now, they want to get the I/O interface, then add a control
surface later, and then upgrade the I/O next time, possibly to an RME.
Right now, the budget is around $400. Can anyone recommend a halfway
decent 2ch or 4ch interface in that neighborhood that will work with
their software? Since it's only the two of them, they really only
record a max of 2 tracks at a pass, so two decent pre's are all that's
really needed for now.
Thanks.
pab
|
|
|
Re: Need a firewire interface recommendation [message #88513 is a reply to message #88509] |
Tue, 24 July 2007 20:26 |
Dedric Terry
Messages: 788 Registered: June 2007
|
Senior Member |
|
|
Paul,
The TC Konnekt 8 or 24D should work well. I'm building a recording rig for
a voiceover artist I work with using this interface.
Can't comment on use yet as it's just spec'd for the rig - I'll probably be
getting it next week and testing it out. It's gotten good reviews for the
preamps (one reason I chose it - best pres for that price range it seems).
Regards,
Dedric
"Paul Braun" <cygnus_nospam@ctgonline.org> wrote in message
news:1mdda395s7arhoeoukkmocllpje4bqusue@4ax.com...
> Two friends of mine, who are excellent singer/songwriters, have
> started their own production company for commercial music - jingles,
> etc., plus recording their own material.
>
> They're using Cubase SX3 plus Reason right now.
>
> They need to step up from the Emu pci card they're using to a better
> interface - and I think we all agree they need to go with something
> firewire.
>
> I've explained the whole process to them - DAW's are something new in
> their experience - and they agree that the modular approach is best
> and will allow them to upgrade as they get more money in the company.
>
> So, for now, they want to get the I/O interface, then add a control
> surface later, and then upgrade the I/O next time, possibly to an RME.
>
> Right now, the budget is around $400. Can anyone recommend a halfway
> decent 2ch or 4ch interface in that neighborhood that will work with
> their software? Since it's only the two of them, they really only
> record a max of 2 tracks at a pass, so two decent pre's are all that's
> really needed for now.
>
> Thanks.
>
> pab
|
|
|
Re: Need a firewire interface recommendation [message #88514 is a reply to message #88509] |
Tue, 24 July 2007 20:32 |
DJ
Messages: 1124 Registered: July 2005
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_05FE_01C7CE3A.2D319E40
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
http://www.prismsound.com/music_recording/products_subs/orph eus/orpheus_h=
ome.php
this one looks nice.............uhhhh...wait........you said four =
"hundred" dollars?=20
Nevermind.
How about :
http://www.zzounds.com/item--TCEKONNECT8
?
"Paul Braun" <cygnus_nospam@ctgonline.org> wrote in message =
news:1mdda395s7arhoeoukkmocllpje4bqusue@4ax.com...
> Two friends of mine, who are excellent singer/songwriters, have
> started their own production company for commercial music - jingles,
> etc., plus recording their own material.
>=20
> They're using Cubase SX3 plus Reason right now.
>=20
> They need to step up from the Emu pci card they're using to a better
> interface - and I think we all agree they need to go with something
> firewire.
>=20
> I've explained the whole process to them - DAW's are something new in
> their experience - and they agree that the modular approach is best
> and will allow them to upgrade as they get more money in the company.
>=20
> So, for now, they want to get the I/O interface, then add a control
> surface later, and then upgrade the I/O next time, possibly to an RME.
>=20
> Right now, the budget is around $400. Can anyone recommend a halfway
> decent 2ch or 4ch interface in that neighborhood that will work with
> their software? Since it's only the two of them, they really only
> record a max of 2 tracks at a pass, so two decent pre's are all that's
> really needed for now.
>=20
> Thanks.
>=20
> pab
------=_NextPart_000_05FE_01C7CE3A.2D319E40
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16414" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial size=3D2><A=20
href=3D" http://www.prismsound.com/music_recording/products_subs/orph eus/o=
rpheus_home.php">http://www.prismsound.com/music_recording/products_subs/=
orpheus/orpheus_home.php</A></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>this one looks=20
nice.............uhhhh...wait........you said four <EM>"hundred" =
</EM>dollars?=20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Nevermind.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>How about :</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><A=20
href=3D"http://www.zzounds.com/item--TCEKONNECT8">http://www.zzounds.com/=
item--TCEKONNECT8</A></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>"Paul Braun" <</FONT><A=20
href=3D"mailto:cygnus_nospam@ctgonline.org"><FONT face=3DArial=20
size=3D2>cygnus_nospam@ctgonline.org</FONT></A><FONT face=3DArial =
size=3D2>> wrote=20
in message </FONT><A=20
href=3D"news:1mdda395s7arhoeoukkmocllpje4bqusue@4ax.com"><FONT =
face=3DArial=20
size=3D2>news:1mdda395s7arhoeoukkmocllpje4bqusue@4ax.com</FONT></A><FONT =
face=3DArial size=3D2>...</FONT></DIV><FONT face=3DArial size=3D2>> =
Two friends of=20
mine, who are excellent singer/songwriters, have<BR>> started their =
own=20
production company for commercial music - jingles,<BR>> etc., plus =
recording=20
their own material.<BR>> <BR>> They're using Cubase SX3 plus =
Reason right=20
now.<BR>> <BR>> They need to step up from the Emu pci card they're =
using=20
to a better<BR>> interface - and I think we all agree they need to go =
with=20
something<BR>> firewire.<BR>> <BR>> I've explained the whole =
process to=20
them - DAW's are something new in<BR>> their experience - and they =
agree that=20
the modular approach is best<BR>> and will allow them to upgrade as =
they get=20
more money in the company.<BR>> <BR>> So, for now, they want to =
get the=20
I/O interface, then add a control<BR>> surface later, and then =
upgrade the=20
I/O next time, possibly to an RME.<BR>> <BR>> Right now, the =
budget is=20
around $400. Can anyone recommend a halfway<BR>> decent 2ch or =
4ch=20
interface in that neighborhood that will work with<BR>> their =
software? =20
Since it's only the two of them, they really only<BR>> record a max =
of 2=20
tracks at a pass, so two decent pre's are all that's<BR>> really =
needed for=20
now.<BR>> <BR>> Thanks.<BR>> <BR>> pab</FONT></BODY></HTML>
------=_NextPart_000_05FE_01C7CE3A.2D319E40--
|
|
|
Re: Need a firewire interface recommendation [message #88519 is a reply to message #88509] |
Tue, 24 July 2007 21:44 |
Chris Ludwig
Messages: 868 Registered: May 2006
|
Senior Member |
|
|
HI Paul,
The TC Konnekt 24D as long as you are using Cubase and you have a Texas
Instruments based firewire chipset it will work great. Best sound AD/DA
and Mic-Pre built into an interface for under $500 IMHO.
The effects are quite good also.
Chris
Paul Braun wrote:
> Two friends of mine, who are excellent singer/songwriters, have
> started their own production company for commercial music - jingles,
> etc., plus recording their own material.
>
> They're using Cubase SX3 plus Reason right now.
>
> They need to step up from the Emu pci card they're using to a better
> interface - and I think we all agree they need to go with something
> firewire.
>
> I've explained the whole process to them - DAW's are something new in
> their experience - and they agree that the modular approach is best
> and will allow them to upgrade as they get more money in the company.
>
> So, for now, they want to get the I/O interface, then add a control
> surface later, and then upgrade the I/O next time, possibly to an RME.
>
> Right now, the budget is around $400. Can anyone recommend a halfway
> decent 2ch or 4ch interface in that neighborhood that will work with
> their software? Since it's only the two of them, they really only
> record a max of 2 tracks at a pass, so two decent pre's are all that's
> really needed for now.
>
> Thanks.
>
> pab
>
--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762
|
|
|
Re: Need a firewire interface recommendation [message #88520 is a reply to message #88509] |
Tue, 24 July 2007 23:06 |
JeffH
Messages: 307 Registered: October 2007 Location: Wamic, OR
|
Senior Member |
|
|
Paul,
I picked up a Nuendo labelled multiface and PCI card for $350 (yes
ebay). Might want to go straight to that rather than the intermediate
step.
Jeff
Braun wrote:
> Two friends of mine, who are excellent singer/songwriters, have
> started their own production company for commercial music - jingles,
> etc., plus recording their own material.
>
> They're using Cubase SX3 plus Reason right now.
>
> They need to step up from the Emu pci card they're using to a better
> interface - and I think we all agree they need to go with something
> firewire.
>
> I've explained the whole process to them - DAW's are something new in
> their experience - and they agree that the modular approach is best
> and will allow them to upgrade as they get more money in the company.
>
> So, for now, they want to get the I/O interface, then add a control
> surface later, and then upgrade the I/O next time, possibly to an RME.
>
> Right now, the budget is around $400. Can anyone recommend a halfway
> decent 2ch or 4ch interface in that neighborhood that will work with
> their software? Since it's only the two of them, they really only
> record a max of 2 tracks at a pass, so two decent pre's are all that's
> really needed for now.
>
> Thanks.
>
> pab
|
|
|
Re: Need a firewire interface recommendation [message #88521 is a reply to message #88509] |
Tue, 24 July 2007 23:16 |
erlilo
Messages: 405 Registered: June 2005
|
Senior Member |
|
|
If they have an EMU1616(M) or 1820(M) pci card, they have the possibility to
use some kind of Adat in/out gear. I know many in Denmark are using these
pci cards with a Behringer ADA8000 to get 8 more in/outs.
Erling
"Paul Braun" <cygnus_nospam@ctgonline.org> skrev i melding
news:1mdda395s7arhoeoukkmocllpje4bqusue@4ax.com...
> Two friends of mine, who are excellent singer/songwriters, have
> started their own production company for commercial music - jingles,
> etc., plus recording their own material.
>
> They're using Cubase SX3 plus Reason right now.
>
> They need to step up from the Emu pci card they're using to a better
> interface - and I think we all agree they need to go with something
> firewire.
>
> I've explained the whole process to them - DAW's are something new in
> their experience - and they agree that the modular approach is best
> and will allow them to upgrade as they get more money in the company.
>
> So, for now, they want to get the I/O interface, then add a control
> surface later, and then upgrade the I/O next time, possibly to an RME.
>
> Right now, the budget is around $400. Can anyone recommend a halfway
> decent 2ch or 4ch interface in that neighborhood that will work with
> their software? Since it's only the two of them, they really only
> record a max of 2 tracks at a pass, so two decent pre's are all that's
> really needed for now.
>
> Thanks.
>
> pab
|
|
|
Re: Need a firewire interface recommendation..M-Audio 1814 [message #88538 is a reply to message #88509] |
Wed, 25 July 2007 08:43 |
LaMont
Messages: 828 Registered: October 2005
|
Senior Member |
|
|
My $$Money and ears says the M-Audio 1814. Killer unit with great drivers
support. The converters sound 400 dollars more than what the unit cost..AND,
by getting a M-Audio unit, your friends can move into Pro Tools M-Powered
which is the same as PT LE..
http://www.m-audio.com/products/en_us/FireWire1814-main.html
I have one (1814) which by the way, replaced my EMU 1212M (Ble it out of
the water..sound wise and lower latency wise..And, it built liek a Brick!!
-6 Analog Inputs..
-2 mic pres...
-8 Adat i/o
-10 Analog outs.
-midi
-Word Clock
-S/PDif
Paul Braun <cygnus_nospam@ctgonline.org> wrote:
>Two friends of mine, who are excellent singer/songwriters, have
>started their own production company for commercial music - jingles,
>etc., plus recording their own material.
>
>They're using Cubase SX3 plus Reason right now.
>
>They need to step up from the Emu pci card they're using to a better
>interface - and I think we all agree they need to go with something
>firewire.
>
>I've explained the whole process to them - DAW's are something new in
>their experience - and they agree that the modular approach is best
>and will allow them to upgrade as they get more money in the company.
>
>So, for now, they want to get the I/O interface, then add a control
>surface later, and then upgrade the I/O next time, possibly to an RME.
>
>Right now, the budget is around $400. Can anyone recommend a halfway
>decent 2ch or 4ch interface in that neighborhood that will work with
>their software? Since it's only the two of them, they really only
>record a max of 2 tracks at a pass, so two decent pre's are all that's
>really needed for now.
>
>Thanks.
>
>pab
|
|
|
Goto Forum:
Current Time: Thu Dec 05 14:27:25 PST 2024
Total time taken to generate the page: 0.01277 seconds
|