The PARIS Forums: PARIS: Main » Simple Creamware-Scope setup Question

Home » The PARIS Forums » PARIS: Main » Simple Creamware-Scope setup Question

Show: Today's Messages :: Polls :: Message Navigator

Simple Creamware-Scope setup Question [message #76205]

Mon, 20 November 2006 09:21

emarenot

Messages: 345
Registered: June 2005

Senior Member

I've read DJ's posts about the scope cards and I'm giving some thought to
perhaps getting a the scope "home" card. I only have one EDS card and I'm
not sure if I've got this right. I'm thinking that I'd like to run the
scope card on the same system as Paris (AMD Athlon 1.7 -or something like
that speed, haven't got the box in front of me). I'm guessing that I'd have
to get an ADAT card for Paris and route the 8 aux sends to the scope card,
with the returns coming back through the same ADAT line. Scope is saying
something like 3ms latency. Have I got this right? Would something like
this work?
Thanks!
MR

Report message to a moderator

Re: Simple Creamware-Scope setup Question [message #76206 is a reply to message #76205]

Mon, 20 November 2006 07:21

Nil
Messages: 245
Registered: March 2007

Senior Member

You can also get their convertor box, the A16Ultra, and run
analog ins & outs if you don't want to mess with the ADAT card
(or if you have trouble finding one). The Home card may or may
not be enough DSP for what you want to do, though... what are
you thinking about in terms of how you'll be implementing it?

Neil

"Mike R." <emarenot@yahoo.com> wrote:
>I've read DJ's posts about the scope cards and I'm giving some thought to
>perhaps getting a the scope "home" card. I only have one EDS card and I'm
>not sure if I've got this right. I'm thinking that I'd like to run the
>scope card on the same system as Paris (AMD Athlon 1.7 -or something like
>that speed, haven't got the box in front of me). I'm guessing that I'd
have
>to get an ADAT card for Paris and route the 8 aux sends to the scope card,
>with the returns coming back through the same ADAT line. Scope is saying
>something like 3ms latency. Have I got this right? Would something like
>this work?
>Thanks!
>MR
>
>

Report message to a moderator

Re: Simple Creamware-Scope setup Question [message #76208 is a reply to message #76205]

Mon, 20 November 2006 09:09

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Hey I am the pulsar geek here not DJ :)
Well you don't need neither the adat interface nor the U16 ad/da .
You can buy yourself a pulsar card with classic option that has spdif in
out and analog in out amoung 16 adat in out.
I suppose you have either a mec or a 442 interface.
So you could connect your digital inputs and outputs plus one stereo analog
in out.
So you can have 4 channels at least for starting to send and receive between
paris and pulsar.
Regards,
Dimitrios

"Mike R." <emarenot@yahoo.com> wrote:
>I've read DJ's posts about the scope cards and I'm giving some thought to
>perhaps getting a the scope "home" card. I only have one EDS card and I'm
>not sure if I've got this right. I'm thinking that I'd like to run the
>scope card on the same system as Paris (AMD Athlon 1.7 -or something like
>that speed, haven't got the box in front of me). I'm guessing that I'd
have
>to get an ADAT card for Paris and route the 8 aux sends to the scope card,
>with the returns coming back through the same ADAT line. Scope is saying
>something like 3ms latency. Have I got this right? Would something like
>this work?
>Thanks!
>MR
>
>

Report message to a moderator

Re: Simple Creamware-Scope setup Question [message #76249 is a reply to message #76206]

Tue, 21 November 2006 09:49

emarenot

Messages: 345
Registered: June 2005

Senior Member

Hey Neil,
Thanks for the response. I'm thinking of using the 8 aux sends/returns as I
only have one EDS card installed and don't want to use up channels for fx
returns. I'm not sure how the synths could be used. I guess I'd have to
return those to a channel (or two) -yes?
I'm guessing that I'd want to use at least two verbs, two to three synths,
possibly a compressor or two. But, if I the home card would simply support
three good sounding reverbs -long, short, medium, that alone would be pretty
nifty.
Thanks again.
MR

"Neil" <IUOIU@OIU.com> wrote in message news:4561b9e7$1@linux...
>
> You can also get their convertor box, the A16Ultra, and run
> analog ins & outs if you don't want to mess with the ADAT card
> (or if you have trouble finding one). The Home card may or may
> not be enough DSP for what you want to do, though... what are
> you thinking about in terms of how you'll be implementing it?
>
> Neil
>
> "Mike R." <emarenot@yahoo.com> wrote:
> >I've read DJ's posts about the scope cards and I'm giving some thought to
> >perhaps getting a the scope "home" card. I only have one EDS card and
I'm
> >not sure if I've got this right. I'm thinking that I'd like to run the
> >scope card on the same system as Paris (AMD Athlon 1.7 -or something like
> >that speed, haven't got the box in front of me). I'm guessing that I'd
> have
> >to get an ADAT card for Paris and route the 8 aux sends to the scope
card,
> >with the returns coming back through the same ADAT line. Scope is saying
> >something like 3ms latency. Have I got this right? Would something like
> >this work?
> >Thanks!
> >MR
> >
> >
>

Report message to a moderator

Previous Topic:	Laptop-usb- audio crackles need some help here !
Next Topic:	SCSI probs

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 16 03:41:22 PST 2024

Total time taken to generate the page: 0.00751 seconds