| PACE Free PARIS 3.01 [message #108929] |
Sat, 03 October 2015 14:36  |
mikeaudet
Messages: 476
Registered: February 2009
Location: Canada
|
Senior Member |
|
|
Hi Everyone,
***update: I just got word that someone at ID is denying that ID gave permission for a PACE free PARIS 3.0 to be released. I'm certain that Edmund gave Brian permission, but I don't have anything in writing from Edmund, so I'm taking down the file as a precaution until we can get a definitive statement from ID.***
I just got word from Brian Tankersly that Edmund Pirali has approved the release of a pace free PARIS 3.01.
I've attached it to this post.
PARIS 3.01 was a bug fix build. I'm not sure what is fixed, but it's newer than 3.0, which is pretty amazing!
I'd like to thank Edmund for allowing this. It's going to make a big difference to a lot of people, including me. This really is quite a gift!
I'd also like the thank Brian T for reaching out to Edmund. We have always been lucky to have Brian in our community. From his help promoting PARIS, to the DVD, to his help in making the first XP driver possible, to helping me just make the PSCL better, and so much more - we're very lucky. Thank you, Brian!
I hope this helps every PARIS user out there. I may just have to re-write the VST effects subsystem now...
All the best!
Mike
[Updated on: Wed, 31 August 2016 12:49] Report message to a moderator |
|
|
|
|
|
| Re: PACE Free PARIS 3.01 [message #108932 is a reply to message #108931] |
Sat, 03 October 2015 15:35  |
BT
Messages: 19
Registered: February 2007
|
Junior Member |
|
|
| ronj_91602 wrote on Sat, 03 October 2015 17:08 | Any instruction or do we load it into the system as is?
|
Just locate your current Paris.EXE, make a safety copy of it and then replace that file with the new Paris.EXE. Where that file is located depends on which Installer you used. On my machine with Mike's newest drivers, it is:
C:\ > Program Files (x86) > E-Mu > Paris Pro > Paris.EXE
If you are on a 32 bit system, it will be in Program Files without the (X86).
Enjoy, and thanks again, Edmund!
Regards,
Brian T
|
|
|
|
|
|
|
|
| Re: PACE Free PARIS 3.01 [message #108935 is a reply to message #108929] |
Sun, 04 October 2015 00:04 |
Richard Kelley
Messages: 44
Registered: June 2013
Location: Ct.
|
Member |
|
|
 Ok it is 2:45 a.m. and I said I would wait till tomorrow. Yea right !, sooooooooooooooooo I downloaded the file, deleted my exe. file, which I have backed up many times. Put in the NEW Edmund file, which by the way if you remember I actually talked to him and found out when they were dumping us. Anyhow......first I had to tell windows to shut up and run or install the program. Boooooooooooom Paris 3.1 on Windows 8.1 So I loaded a song and it played back fine ! I then quit Paris no problem, shut down computer, started computer zzzzzzzzzzzzzzzzz excuse me, made a shortcut to the new exe. on the desktop, clicked the shortcut, Booooooom Paris 3,01 on windows 8.1 Paris started right up with no B.S. played a tune worked FINE!!! Wow what the hell year was this craziness all started and we are still digging this program, and now 64 bit windows 8.1 Paris 3.01 in 2015 !NO PACE !!!!! Freedom Yee-Haw !But thanks Edmund anyhow, and Brian and all computer  Gurus, ahh there I thought of a better term, for keeping this going. Last thing, if you got Paris to play nicely with my waves vst toys, wow tape plugins on vocals and acoustic guitars etc. MAMA Mia ! that would be some spicy meatball ! Time to konk out I have to play later today and Monday so I will try recording Tuesday and let you know how it goes. Thanks to all! 
|
|
|
|
|
|
| Re: PACE Free PARIS 3.01 [message #108937 is a reply to message #108936] |
Sun, 04 October 2015 09:58 |
Kim W.
Messages: 189
Registered: January 2010
Location: Australia
|
Senior Member |
|
|
Hi All.
FWIW, I ventured out to the "dungeon" tonight, to do some rough mixes of an album I'm currently recording for a client. (A continuous timeline with some 25 songs, spanning 32+ tracks, and over a thousand files in the audio bin...).
I decided to replace the pace-free V3.0 that I've been using for years, with this version 3.01.
I'm happy to report that all went well. No sign of trouble at all, on Win7 64 bit. (Four EDS's, two MECs.)
Loaded up a couple of other projects with heavier plugin use, and so far, No problems!
I went straight for the old well known bug in 3.0, whereby the now line would stop moving in the editor window, when an area below track 18 was clicked on, and sure enough, that bug has been fixed.
Time will tell if other, random gremlins have been rectified.
But from my end, in any case, so far so good!
A big thanks to Edmund for finally releasing this version.
I know how pear shaped things had gotten all those years ago, with the takeover by Creative, and the death of SSC, but it is indeed a glorious thing, that this wonderful beast has somehow survived all these years, through thick and thin, due to the efforts of the likes of Chuck, Mike, Kerry, Brian, Aaron, Derek, etc etc....
Anyway, all I can say is, jump in. The weather is fine.
But for now, don't forget to back up your old exe, just in case....
The question has to be asked, however. What treats awaited us with the yet uncompiled version 3.02 that Kerry and Mike have beenworking on???
Cheers,
Kim
[Updated on: Sun, 04 October 2015 10:10] Report message to a moderator |
|
|
|
|
|
| Re: PACE Free PARIS 3.01 [message #108940 is a reply to message #108937] |
Sun, 04 October 2015 13:35 |
|
|
| Kim W. wrote on Sun, 04 October 2015 09:58 | Hi All.
The question has to be asked, however. What treats awaited us with the yet uncompiled version 3.02 that Kerry and Mike have beenworking on???
|
Mike could answer the 3.02 question better than I, but I had to jump in and say that all I did was shake the tree to find versions of CodeWarrior for experimentation - the work on 3.02 is 100% Mike. I wouldn't even know who to ask where to start beginning.
"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: PACE Free PARIS 3.01 [message #109203 is a reply to message #109201] |
Sat, 18 June 2016 08:57 |
mikeaudet
Messages: 476
Registered: February 2009
Location: Canada
|
Senior Member |
|
|
Hi Nic,
Feel free to contact ID about a pace free Mac version, but I don't think it's going get results.
From what I gather, the PARIS application continued to be developed into a new product, probably a law enforcement product, after Emu discontinued the hardware. I'm not sure if ID even has the code as it was at the time of 3.0's release to produce a PACE free version.
To my knowledge, the PACE removal utility was never released for the MAC, so there is no way to remove the PACE code from the existing MAC version, even it if is legal in your jurisdiction.
ID has publicly stated that they will no longer provide response codes for PARIS 3.0.
My advice is to get a PC. PARIS 3.0 runs great, and PCs are relatively cheap. You'll be able to port all your session files, though native plugins may not be retained.
I wish I could help you with a Mac version, and I wish you the best of luck if you decide to contact ID. Please let us know how it goes.
I hope this helps.
Mike
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: PACE Free PARIS 3.01 [message #109486 is a reply to message #108929] |
Fri, 09 March 2018 11:11 |
|
|
Sorry folks, we can't link that here.
While the status of PACE-free Paris is still in dispute, we don't want to run the (even extremely minimal) risk of posting or linking it, either publicly or privately. It would be damaging to the community to risk having this forum taken offline. Even if IMHO the legal grounds for taking it down were extremely shaky and could be easily gutted like a flounder in court, we could still be down for a while.
You'll just have to talk amongst yourselves privately about those sort of things while the status clarifies.
"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
[Updated on: Fri, 09 March 2018 11:12] Report message to a moderator |
|
|
|
|
|
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
Hmmmm well did some recording tonight on 3.1 Well it plays back very solid, records very solid, it won't let you do gain changes or super normalization stuff, it will do the bottom stuff on that pull down. In 
automation edit window it will not allow you to use the eraser or the pencil functions so you cannot say erase mutes on the automated window. Those functions are greyed out in the window. I went to 3.0 and everything was ROCK !! Bummer but I hope this helps. 
(if disaster struck I could probably live with that)
