The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Please help with Paris Issue
Please help with Paris Issue [message #100959] Wed, 05 November 2008 15:45 Go to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
Hello All,

It has been a while since I have posted, hope everyone is doing well.

I am having an issue with Paris all of a sudden. When I try to launch it
goes through the opening process and then when I should see the main screen,
it disappears completely. If I try to launch again, it shuts the computer
down.

I have been running Paris for the past two years without much trouble on
this computer, but today I loaded some new plugs and this happened. (HP dualcore
running XP sp2)

I uninstalled the new plugs and also re-installed Paris, but neither fixed
the problem. I tried to run Paris after running a restore point, but that
didn't work.

I am wondering if I need to uninstall Paris and delete the EMU completely
before reinstalling Paris?

Can anyone help me with this problem?


Thanks,
Mike
Re: Please help with Paris Issue [message #100961 is a reply to message #100959] Wed, 05 November 2008 17:54 Go to previous messageGo to next message
Robert is currently offline  Robert   CANADA
Messages: 127
Registered: May 2007
Senior Member
So Mike, you haven't changed any hardware in this box, only software,
correct? I would backup my 3 Paris config files, then try uninstalling and
removing Paris completely and then re-install. How many EDS cards?
Keep us posted.
Good luck
Rob


"Mike P" <mikep@hometownrecords.com> wrote in message
news:4912221d$1@linux...
>
> Hello All,
>
> It has been a while since I have posted, hope everyone is doing well.
>
> I am having an issue with Paris all of a sudden. When I try to launch it
> goes through the opening process and then when I should see the main
> screen,
> it disappears completely. If I try to launch again, it shuts the computer
> down.
>
> I have been running Paris for the past two years without much trouble on
> this computer, but today I loaded some new plugs and this happened. (HP
> dualcore
> running XP sp2)
>
> I uninstalled the new plugs and also re-installed Paris, but neither fixed
> the problem. I tried to run Paris after running a restore point, but that
> didn't work.
>
> I am wondering if I need to uninstall Paris and delete the EMU completely
> before reinstalling Paris?
>
> Can anyone help me with this problem?
>
>
> Thanks,
> Mike
Re: Please help with Paris Issue [message #100962 is a reply to message #100961] Wed, 05 November 2008 20:23 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
Correct, I just changed some plugins (waves) which must have disrupted things.


I have 2 EDS cards.

After I reinstall Paris, it will work once, then it gives me errors after
that.

Should I reinstall the subsystem as well?

"Rob_A" <mani1147athotmaildotcom> wrote:
>So Mike, you haven't changed any hardware in this box, only software,
>correct? I would backup my 3 Paris config files, then try uninstalling and

>removing Paris completely and then re-install. How many EDS cards?
>Keep us posted.
>Good luck
>Rob
>
>
>"Mike P" <mikep@hometownrecords.com> wrote in message
>news:4912221d$1@linux...
>>
>> Hello All,
>>
>> It has been a while since I have posted, hope everyone is doing well.
>>
>> I am having an issue with Paris all of a sudden. When I try to launch
it
>> goes through the opening process and then when I should see the main
>> screen,
>> it disappears completely. If I try to launch again, it shuts the computer
>> down.
>>
>> I have been running Paris for the past two years without much trouble
on
>> this computer, but today I loaded some new plugs and this happened. (HP

>> dualcore
>> running XP sp2)
>>
>> I uninstalled the new plugs and also re-installed Paris, but neither fixed
>> the problem. I tried to run Paris after running a restore point, but that
>> didn't work.
>>
>> I am wondering if I need to uninstall Paris and delete the EMU completely
>> before reinstalling Paris?
>>
>> Can anyone help me with this problem?
>>
>>
>> Thanks,
>> Mike
>
>
Re: Please help with Paris Issue [message #100963 is a reply to message #100962] Wed, 05 November 2008 19:45 Go to previous messageGo to next message
JeffH is currently offline  JeffH   UNITED STATES
Messages: 307
Registered: October 2007
Location: Wamic, OR
Senior Member
Mike P wrote:
> Correct, I just changed some plugins (waves) which must have disrupted things.
>
>
> I have 2 EDS cards.
>
> After I reinstall Paris, it will work once, then it gives me errors after
> that.
>
> Should I reinstall the subsystem as well?
Yes. Might be a good a idea to reinstall all...the scherzo, paris, then
the subsystem. THe other thing is try starting without a default
project in the Paris directory adn see if the problem persists.

Jeff

> "Rob_A" <mani1147athotmaildotcom> wrote:
>
>>So Mike, you haven't changed any hardware in this box, only software,
>>correct? I would backup my 3 Paris config files, then try uninstalling and
>
>
>>removing Paris completely and then re-install. How many EDS cards?
>>Keep us posted.
>>Good luck
>>Rob
>>
>>
>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>news:4912221d$1@linux...
>>
>>>Hello All,
>>>
>>>It has been a while since I have posted, hope everyone is doing well.
>>>
>>>I am having an issue with Paris all of a sudden. When I try to launch
>
> it
>
>>>goes through the opening process and then when I should see the main
>>>screen,
>>>it disappears completely. If I try to launch again, it shuts the computer
>>>down.
>>>
>>>I have been running Paris for the past two years without much trouble
>
> on
>
>>>this computer, but today I loaded some new plugs and this happened. (HP
>
>
>>>dualcore
>>>running XP sp2)
>>>
>>>I uninstalled the new plugs and also re-installed Paris, but neither fixed
>>>the problem. I tried to run Paris after running a restore point, but that
>>>didn't work.
>>>
>>>I am wondering if I need to uninstall Paris and delete the EMU completely
>>>before reinstalling Paris?
>>>
>>>Can anyone help me with this problem?
>>>
>>>
>>>Thanks,
>>>Mike
>>
>>
>
Re: Please help with Paris Issue [message #100967 is a reply to message #100963] Thu, 06 November 2008 09:08 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
I uninstalled both Paris and the subsystem and deleted the EMU folder from
the C drive. Reinstalled both and it loaded perfectly twice. Then the third
launch it disappeared after the splash screen again?

What could be causing this?? HELP!!!

Jeff Hoover <jkhoover@excite.com> wrote:
>Mike P wrote:
>> Correct, I just changed some plugins (waves) which must have disrupted
things.
>>
>>
>> I have 2 EDS cards.
>>
>> After I reinstall Paris, it will work once, then it gives me errors after
>> that.
>>
>> Should I reinstall the subsystem as well?
>Yes. Might be a good a idea to reinstall all...the scherzo, paris, then

>the subsystem. THe other thing is try starting without a default
>project in the Paris directory adn see if the problem persists.
>
>Jeff
>
>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>
>>>So Mike, you haven't changed any hardware in this box, only software,

>>>correct? I would backup my 3 Paris config files, then try uninstalling
and
>>
>>
>>>removing Paris completely and then re-install. How many EDS cards?
>>>Keep us posted.
>>>Good luck
>>>Rob
>>>
>>>
>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>news:4912221d$1@linux...
>>>
>>>>Hello All,
>>>>
>>>>It has been a while since I have posted, hope everyone is doing well.
>>>>
>>>>I am having an issue with Paris all of a sudden. When I try to launch
>>
>> it
>>
>>>>goes through the opening process and then when I should see the main

>>>>screen,
>>>>it disappears completely. If I try to launch again, it shuts the computer
>>>>down.
>>>>
>>>>I have been running Paris for the past two years without much trouble
>>
>> on
>>
>>>>this computer, but today I loaded some new plugs and this happened. (HP
>>
>>
>>>>dualcore
>>>>running XP sp2)
>>>>
>>>>I uninstalled the new plugs and also re-installed Paris, but neither
fixed
>>>>the problem. I tried to run Paris after running a restore point, but
that
>>>>didn't work.
>>>>
>>>>I am wondering if I need to uninstall Paris and delete the EMU completely
>>>>before reinstalling Paris?
>>>>
>>>>Can anyone help me with this problem?
>>>>
>>>>
>>>>Thanks,
>>>>Mike
>>>
>>>
>>
Re: Please help with Paris Issue UPDATE [message #100969 is a reply to message #100967] Thu, 06 November 2008 11:13 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
It is still not working, however I noticed that it only loads until it gets
to loading the DirectX effects, that is when it crashes.

Help.


"Mike P" <mikep@hometownrecords.com> wrote:
>
>I uninstalled both Paris and the subsystem and deleted the EMU folder from
>the C drive. Reinstalled both and it loaded perfectly twice. Then the third
>launch it disappeared after the splash screen again?
>
>What could be causing this?? HELP!!!
>
>Jeff Hoover <jkhoover@excite.com> wrote:
>>Mike P wrote:
>>> Correct, I just changed some plugins (waves) which must have disrupted
>things.
>>>
>>>
>>> I have 2 EDS cards.
>>>
>>> After I reinstall Paris, it will work once, then it gives me errors after
>>> that.
>>>
>>> Should I reinstall the subsystem as well?
>>Yes. Might be a good a idea to reinstall all...the scherzo, paris, then
>
>>the subsystem. THe other thing is try starting without a default
>>project in the Paris directory adn see if the problem persists.
>>
>>Jeff
>>
>>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>
>>>>So Mike, you haven't changed any hardware in this box, only software,
>
>>>>correct? I would backup my 3 Paris config files, then try uninstalling
>and
>>>
>>>
>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>Keep us posted.
>>>>Good luck
>>>>Rob
>>>>
>>>>
>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>news:4912221d$1@linux...
>>>>
>>>>>Hello All,
>>>>>
>>>>>It has been a while since I have posted, hope everyone is doing well.
>>>>>
>>>>>I am having an issue with Paris all of a sudden. When I try to launch
>>>
>>> it
>>>
>>>>>goes through the opening process and then when I should see the main
>
>>>>>screen,
>>>>>it disappears completely. If I try to launch again, it shuts the computer
>>>>>down.
>>>>>
>>>>>I have been running Paris for the past two years without much trouble
>>>
>>> on
>>>
>>>>>this computer, but today I loaded some new plugs and this happened.
(HP
>>>
>>>
>>>>>dualcore
>>>>>running XP sp2)
>>>>>
>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>fixed
>>>>>the problem. I tried to run Paris after running a restore point, but
>that
>>>>>didn't work.
>>>>>
>>>>>I am wondering if I need to uninstall Paris and delete the EMU completely
>>>>>before reinstalling Paris?
>>>>>
>>>>>Can anyone help me with this problem?
>>>>>
>>>>>
>>>>>Thanks,
>>>>>Mike
>>>>
>>>>
>>>
>
Re: Please help with Paris Issue UPDATE [message #100970 is a reply to message #100969] Thu, 06 November 2008 10:16 Go to previous messageGo to next message
Robert is currently offline  Robert   CANADA
Messages: 127
Registered: May 2007
Senior Member
You could head over to analogX.com website and download his free DXplgin
inspector prog he's got there, then run that and see all plugs that are
still installed and start disabling them until you hit the bad one. It
really looks like a DX plug issue at this point my friend. Is VST plug
disabled in your Paris Config file?

Good luck
Rob


"Mike P" <mikep@hometownrecords.com> wrote in message
news:491333c9$1@linux...
>
> It is still not working, however I noticed that it only loads until it
> gets
> to loading the DirectX effects, that is when it crashes.
>
> Help.
>
>
> "Mike P" <mikep@hometownrecords.com> wrote:
>>
>>I uninstalled both Paris and the subsystem and deleted the EMU folder from
>>the C drive. Reinstalled both and it loaded perfectly twice. Then the
>>third
>>launch it disappeared after the splash screen again?
>>
>>What could be causing this?? HELP!!!
>>
>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>Mike P wrote:
>>>> Correct, I just changed some plugins (waves) which must have disrupted
>>things.
>>>>
>>>>
>>>> I have 2 EDS cards.
>>>>
>>>> After I reinstall Paris, it will work once, then it gives me errors
>>>> after
>>>> that.
>>>>
>>>> Should I reinstall the subsystem as well?
>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris, then
>>
>>>the subsystem. THe other thing is try starting without a default
>>>project in the Paris directory adn see if the problem persists.
>>>
>>>Jeff
>>>
>>>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>>
>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>
>>>>>correct? I would backup my 3 Paris config files, then try uninstalling
>>and
>>>>
>>>>
>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>Keep us posted.
>>>>>Good luck
>>>>>Rob
>>>>>
>>>>>
>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>news:4912221d$1@linux...
>>>>>
>>>>>>Hello All,
>>>>>>
>>>>>>It has been a while since I have posted, hope everyone is doing well.
>>>>>>
>>>>>>I am having an issue with Paris all of a sudden. When I try to launch
>>>>
>>>> it
>>>>
>>>>>>goes through the opening process and then when I should see the main
>>
>>>>>>screen,
>>>>>>it disappears completely. If I try to launch again, it shuts the
>>>>>>computer
>>>>>>down.
>>>>>>
>>>>>>I have been running Paris for the past two years without much trouble
>>>>
>>>> on
>>>>
>>>>>>this computer, but today I loaded some new plugs and this happened.
> (HP
>>>>
>>>>
>>>>>>dualcore
>>>>>>running XP sp2)
>>>>>>
>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>fixed
>>>>>>the problem. I tried to run Paris after running a restore point, but
>>that
>>>>>>didn't work.
>>>>>>
>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>completely
>>>>>>before reinstalling Paris?
>>>>>>
>>>>>>Can anyone help me with this problem?
>>>>>>
>>>>>>
>>>>>>Thanks,
>>>>>>Mike
>>>>>
>>>>>
>>>>
>>
>
Re: Please help with Paris Issue UPDATE [message #100971 is a reply to message #100969] Thu, 06 November 2008 10:25 Go to previous messageGo to next message
JeffH is currently offline  JeffH   UNITED STATES
Messages: 307
Registered: October 2007
Location: Wamic, OR
Senior Member
Mike P wrote:
> It is still not working, however I noticed that it only loads until it gets
> to loading the DirectX effects, that is when it crashes.
>
> Help.
>
>
> "Mike P" <mikep@hometownrecords.com> wrote:
>
>>I uninstalled both Paris and the subsystem and deleted the EMU folder from
>>the C drive. Reinstalled both and it loaded perfectly twice. Then the third
>>launch it disappeared after the splash screen again?
>>
>>What could be causing this?? HELP!!!
>>
>>Jeff Hoover <jkhoover@excite.com> wrote:
>>
>>>Mike P wrote:
>>>
>>>>Correct, I just changed some plugins (waves) which must have disrupted
>>
>>things.
>>
>>>>
>>>>I have 2 EDS cards.
>>>>
>>>>After I reinstall Paris, it will work once, then it gives me errors after
>>>>that.
>>>>
>>>>Should I reinstall the subsystem as well?
>>>
>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris, then
>>
>>>the subsystem. THe other thing is try starting without a default
>>>project in the Paris directory adn see if the problem persists.
>>>
>>>Jeff
>>>
>>>
>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>
>>>>
>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>
>>>>>correct? I would backup my 3 Paris config files, then try uninstalling
>>
>>and
>>
>>>>
>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>Keep us posted.
>>>>>Good luck
>>>>>Rob
>>>>>
>>>>>
>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>news:4912221d$1@linux...
>>>>>
>>>>>
>>>>>>Hello All,
>>>>>>
>>>>>>It has been a while since I have posted, hope everyone is doing well.
>>>>>>
>>>>>>I am having an issue with Paris all of a sudden. When I try to launch
>>>>
>>>>it
>>>>
>>>>
>>>>>>goes through the opening process and then when I should see the main
>>
>>>>>>screen,
>>>>>>it disappears completely. If I try to launch again, it shuts the computer
>>>>>>down.
>>>>>>
>>>>>>I have been running Paris for the past two years without much trouble
>>>>
>>>>on
>>>>
>>>>
>>>>>>this computer, but today I loaded some new plugs and this happened.
>
> (HP
>
>>>>
>>>>>>dualcore
>>>>>>running XP sp2)
>>>>>>
>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>
>>fixed
>>
>>>>>>the problem. I tried to run Paris after running a restore point, but
>>
>>that
>>
>>>>>>didn't work.
>>>>>>
>>>>>>I am wondering if I need to uninstall Paris and delete the EMU completely
>>>>>>before reinstalling Paris?
>>>>>>
>>>>>>Can anyone help me with this problem?
>>>>>>
>>>>>>
>>>>>>Thanks,
>>>>>>Mike
>>>>>
>>>>>
>
In you paris.cfg file add

DisableDirectx=1

See if not load the dx plugs will allow you in. Did you also
delete/rename the default project?

Jeff
Re: Please help with Paris Issue UPDATE [message #100972 is a reply to message #100970] Thu, 06 November 2008 11:59 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
No, it isn't disabled. Should it be?

I have DXMan and checked it for missing plugs.

I use a vst wrapper and "unwrapped" all of those plugins, but it didn't make
a difference.

Also, I uninstalled all of my Waves plugs, but that didn't help either.

Thanks for your help.

"Rob Arsenault" <mani1147athotmaildotcom> wrote:
>You could head over to analogX.com website and download his free DXplgin

>inspector prog he's got there, then run that and see all plugs that are

>still installed and start disabling them until you hit the bad one. It
>really looks like a DX plug issue at this point my friend. Is VST plug
>disabled in your Paris Config file?
>
>Good luck
>Rob
>
>
>"Mike P" <mikep@hometownrecords.com> wrote in message
>news:491333c9$1@linux...
>>
>> It is still not working, however I noticed that it only loads until it

>> gets
>> to loading the DirectX effects, that is when it crashes.
>>
>> Help.
>>
>>
>> "Mike P" <mikep@hometownrecords.com> wrote:
>>>
>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
from
>>>the C drive. Reinstalled both and it loaded perfectly twice. Then the

>>>third
>>>launch it disappeared after the splash screen again?
>>>
>>>What could be causing this?? HELP!!!
>>>
>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>>Mike P wrote:
>>>>> Correct, I just changed some plugins (waves) which must have disrupted
>>>things.
>>>>>
>>>>>
>>>>> I have 2 EDS cards.
>>>>>
>>>>> After I reinstall Paris, it will work once, then it gives me errors

>>>>> after
>>>>> that.
>>>>>
>>>>> Should I reinstall the subsystem as well?
>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris, then
>>>
>>>>the subsystem. THe other thing is try starting without a default
>>>>project in the Paris directory adn see if the problem persists.
>>>>
>>>>Jeff
>>>>
>>>>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>
>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>
>>>>>>correct? I would backup my 3 Paris config files, then try uninstalling
>>>and
>>>>>
>>>>>
>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>Keep us posted.
>>>>>>Good luck
>>>>>>Rob
>>>>>>
>>>>>>
>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>news:4912221d$1@linux...
>>>>>>
>>>>>>>Hello All,
>>>>>>>
>>>>>>>It has been a while since I have posted, hope everyone is doing well.
>>>>>>>
>>>>>>>I am having an issue with Paris all of a sudden. When I try to launch
>>>>>
>>>>> it
>>>>>
>>>>>>>goes through the opening process and then when I should see the main
>>>
>>>>>>>screen,
>>>>>>>it disappears completely. If I try to launch again, it shuts the
>>>>>>>computer
>>>>>>>down.
>>>>>>>
>>>>>>>I have been running Paris for the past two years without much trouble
>>>>>
>>>>> on
>>>>>
>>>>>>>this computer, but today I loaded some new plugs and this happened.
>> (HP
>>>>>
>>>>>
>>>>>>>dualcore
>>>>>>>running XP sp2)
>>>>>>>
>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>fixed
>>>>>>>the problem. I tried to run Paris after running a restore point, but
>>>that
>>>>>>>didn't work.
>>>>>>>
>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>>completely
>>>>>>>before reinstalling Paris?
>>>>>>>
>>>>>>>Can anyone help me with this problem?
>>>>>>>
>>>>>>>
>>>>>>>Thanks,
>>>>>>>Mike
>>>>>>
>>>>>>
>>>>>
>>>
>>
>
>
Re: Please help with Paris Issue UPDATE [message #100973 is a reply to message #100971] Thu, 06 November 2008 12:02 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
Thanks, I'll try that.

Jeff Hoover <jkhoover@excite.com> wrote:
>Mike P wrote:
>> It is still not working, however I noticed that it only loads until it
gets
>> to loading the DirectX effects, that is when it crashes.
>>
>> Help.
>>
>>
>> "Mike P" <mikep@hometownrecords.com> wrote:
>>
>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
from
>>>the C drive. Reinstalled both and it loaded perfectly twice. Then the
third
>>>launch it disappeared after the splash screen again?
>>>
>>>What could be causing this?? HELP!!!
>>>
>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>
>>>>Mike P wrote:
>>>>
>>>>>Correct, I just changed some plugins (waves) which must have disrupted
>>>
>>>things.
>>>
>>>>>
>>>>>I have 2 EDS cards.
>>>>>
>>>>>After I reinstall Paris, it will work once, then it gives me errors
after
>>>>>that.
>>>>>
>>>>>Should I reinstall the subsystem as well?
>>>>
>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris, then
>>>
>>>>the subsystem. THe other thing is try starting without a default
>>>>project in the Paris directory adn see if the problem persists.
>>>>
>>>>Jeff
>>>>
>>>>
>>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>
>>>>>
>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>
>>>>>>correct? I would backup my 3 Paris config files, then try uninstalling
>>>
>>>and
>>>
>>>>>
>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>Keep us posted.
>>>>>>Good luck
>>>>>>Rob
>>>>>>
>>>>>>
>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>news:4912221d$1@linux...
>>>>>>
>>>>>>
>>>>>>>Hello All,
>>>>>>>
>>>>>>>It has been a while since I have posted, hope everyone is doing well.
>>>>>>>
>>>>>>>I am having an issue with Paris all of a sudden. When I try to launch
>>>>>
>>>>>it
>>>>>
>>>>>
>>>>>>>goes through the opening process and then when I should see the main
>>>
>>>>>>>screen,
>>>>>>>it disappears completely. If I try to launch again, it shuts the computer
>>>>>>>down.
>>>>>>>
>>>>>>>I have been running Paris for the past two years without much trouble
>>>>>
>>>>>on
>>>>>
>>>>>
>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>
>> (HP
>>
>>>>>
>>>>>>>dualcore
>>>>>>>running XP sp2)
>>>>>>>
>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>
>>>fixed
>>>
>>>>>>>the problem. I tried to run Paris after running a restore point, but
>>>
>>>that
>>>
>>>>>>>didn't work.
>>>>>>>
>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU completely
>>>>>>>before reinstalling Paris?
>>>>>>>
>>>>>>>Can anyone help me with this problem?
>>>>>>>
>>>>>>>
>>>>>>>Thanks,
>>>>>>>Mike
>>>>>>
>>>>>>
>>
>In you paris.cfg file add
>
>DisableDirectx=1
>
>See if not load the dx plugs will allow you in. Did you also
>delete/rename the default project?
>
>Jeff
Re: Please help with Paris Issue UPDATE [message #100974 is a reply to message #100972] Thu, 06 November 2008 10:58 Go to previous messageGo to next message
Robert is currently offline  Robert   CANADA
Messages: 127
Registered: May 2007
Senior Member
"Mike P" <mikep@hometownrecords.com> wrote in message
news:49133e9e$1@linux...
>
> No, it isn't disabled. Should it be?


If your not using any VSTs, you could disable it, probably not related to
your problem thow but worth a shot. Also, try what Jeff said and disable
DXplugs in your config file, good idea.







>>news:491333c9$1@linux...
>>>
>>> It is still not working, however I noticed that it only loads until it
>
>>> gets
>>> to loading the DirectX effects, that is when it crashes.
>>>
>>> Help.
>>>
>>>
>>> "Mike P" <mikep@hometownrecords.com> wrote:
>>>>
>>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
> from
>>>>the C drive. Reinstalled both and it loaded perfectly twice. Then the
>
>>>>third
>>>>launch it disappeared after the splash screen again?
>>>>
>>>>What could be causing this?? HELP!!!
>>>>
>>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>>>Mike P wrote:
>>>>>> Correct, I just changed some plugins (waves) which must have
>>>>>> disrupted
>>>>things.
>>>>>>
>>>>>>
>>>>>> I have 2 EDS cards.
>>>>>>
>>>>>> After I reinstall Paris, it will work once, then it gives me errors
>
>>>>>> after
>>>>>> that.
>>>>>>
>>>>>> Should I reinstall the subsystem as well?
>>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris,
>>>>>then
>>>>
>>>>>the subsystem. THe other thing is try starting without a default
>>>>>project in the Paris directory adn see if the problem persists.
>>>>>
>>>>>Jeff
>>>>>
>>>>>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>>
>>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>>
>>>>>>>correct? I would backup my 3 Paris config files, then try
>>>>>>>uninstalling
>>>>and
>>>>>>
>>>>>>
>>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>>Keep us posted.
>>>>>>>Good luck
>>>>>>>Rob
>>>>>>>
>>>>>>>
>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>>news:4912221d$1@linux...
>>>>>>>
>>>>>>>>Hello All,
>>>>>>>>
>>>>>>>>It has been a while since I have posted, hope everyone is doing
>>>>>>>>well.
>>>>>>>>
>>>>>>>>I am having an issue with Paris all of a sudden. When I try to
>>>>>>>>launch
>>>>>>
>>>>>> it
>>>>>>
>>>>>>>>goes through the opening process and then when I should see the main
>>>>
>>>>>>>>screen,
>>>>>>>>it disappears completely. If I try to launch again, it shuts the
>>>>>>>>computer
>>>>>>>>down.
>>>>>>>>
>>>>>>>>I have been running Paris for the past two years without much
>>>>>>>>trouble
>>>>>>
>>>>>> on
>>>>>>
>>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>> (HP
>>>>>>
>>>>>>
>>>>>>>>dualcore
>>>>>>>>running XP sp2)
>>>>>>>>
>>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>>fixed
>>>>>>>>the problem. I tried to run Paris after running a restore point, but
>>>>that
>>>>>>>>didn't work.
>>>>>>>>
>>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>>>completely
>>>>>>>>before reinstalling Paris?
>>>>>>>>
>>>>>>>>Can anyone help me with this problem?
>>>>>>>>
>>>>>>>>
>>>>>>>>Thanks,
>>>>>>>>Mike
>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>>
>>
>>
>
Re: Please help with Paris Issue UPDATE [message #100975 is a reply to message #100971] Thu, 06 November 2008 12:18 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
I disbled the directx like you said and Paris gave me an error saying that
it couldn't find the stockfx.dll file, so I copied it from the windows/sysem32/ensoniq
to the EMU paris Pro and now I get an "unhandled exception c00000005". I
know that I have seen this error before, but I can't remember how I fixed
it. Any Ideas?




Jeff Hoover <jkhoover@excite.com> wrote:
>Mike P wrote:
>> It is still not working, however I noticed that it only loads until it
gets
>> to loading the DirectX effects, that is when it crashes.
>>
>> Help.
>>
>>
>> "Mike P" <mikep@hometownrecords.com> wrote:
>>
>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
from
>>>the C drive. Reinstalled both and it loaded perfectly twice. Then the
third
>>>launch it disappeared after the splash screen again?
>>>
>>>What could be causing this?? HELP!!!
>>>
>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>
>>>>Mike P wrote:
>>>>
>>>>>Correct, I just changed some plugins (waves) which must have disrupted
>>>
>>>things.
>>>
>>>>>
>>>>>I have 2 EDS cards.
>>>>>
>>>>>After I reinstall Paris, it will work once, then it gives me errors
after
>>>>>that.
>>>>>
>>>>>Should I reinstall the subsystem as well?
>>>>
>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris, then
>>>
>>>>the subsystem. THe other thing is try starting without a default
>>>>project in the Paris directory adn see if the problem persists.
>>>>
>>>>Jeff
>>>>
>>>>
>>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>
>>>>>
>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>
>>>>>>correct? I would backup my 3 Paris config files, then try uninstalling
>>>
>>>and
>>>
>>>>>
>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>Keep us posted.
>>>>>>Good luck
>>>>>>Rob
>>>>>>
>>>>>>
>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>news:4912221d$1@linux...
>>>>>>
>>>>>>
>>>>>>>Hello All,
>>>>>>>
>>>>>>>It has been a while since I have posted, hope everyone is doing well.
>>>>>>>
>>>>>>>I am having an issue with Paris all of a sudden. When I try to launch
>>>>>
>>>>>it
>>>>>
>>>>>
>>>>>>>goes through the opening process and then when I should see the main
>>>
>>>>>>>screen,
>>>>>>>it disappears completely. If I try to launch again, it shuts the computer
>>>>>>>down.
>>>>>>>
>>>>>>>I have been running Paris for the past two years without much trouble
>>>>>
>>>>>on
>>>>>
>>>>>
>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>
>> (HP
>>
>>>>>
>>>>>>>dualcore
>>>>>>>running XP sp2)
>>>>>>>
>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>
>>>fixed
>>>
>>>>>>>the problem. I tried to run Paris after running a restore point, but
>>>
>>>that
>>>
>>>>>>>didn't work.
>>>>>>>
>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU completely
>>>>>>>before reinstalling Paris?
>>>>>>>
>>>>>>>Can anyone help me with this problem?
>>>>>>>
>>>>>>>
>>>>>>>Thanks,
>>>>>>>Mike
>>>>>>
>>>>>>
>>
>In you paris.cfg file add
>
>DisableDirectx=1
>
>See if not load the dx plugs will allow you in. Did you also
>delete/rename the default project?
>
>Jeff
Re: Please help with Paris Issue UPDATE [message #100976 is a reply to message #100971] Thu, 06 November 2008 12:25 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
Disabling the directx fixed the problem, I guess I will have to go through
the plugs one at a time to find the culprit.

Thanks so much for your help!

Jeff Hoover <jkhoover@excite.com> wrote:
>Mike P wrote:
>> It is still not working, however I noticed that it only loads until it
gets
>> to loading the DirectX effects, that is when it crashes.
>>
>> Help.
>>
>>
>> "Mike P" <mikep@hometownrecords.com> wrote:
>>
>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
from
>>>the C drive. Reinstalled both and it loaded perfectly twice. Then the
third
>>>launch it disappeared after the splash screen again?
>>>
>>>What could be causing this?? HELP!!!
>>>
>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>
>>>>Mike P wrote:
>>>>
>>>>>Correct, I just changed some plugins (waves) which must have disrupted
>>>
>>>things.
>>>
>>>>>
>>>>>I have 2 EDS cards.
>>>>>
>>>>>After I reinstall Paris, it will work once, then it gives me errors
after
>>>>>that.
>>>>>
>>>>>Should I reinstall the subsystem as well?
>>>>
>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris, then
>>>
>>>>the subsystem. THe other thing is try starting without a default
>>>>project in the Paris directory adn see if the problem persists.
>>>>
>>>>Jeff
>>>>
>>>>
>>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>
>>>>>
>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>
>>>>>>correct? I would backup my 3 Paris config files, then try uninstalling
>>>
>>>and
>>>
>>>>>
>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>Keep us posted.
>>>>>>Good luck
>>>>>>Rob
>>>>>>
>>>>>>
>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>news:4912221d$1@linux...
>>>>>>
>>>>>>
>>>>>>>Hello All,
>>>>>>>
>>>>>>>It has been a while since I have posted, hope everyone is doing well.
>>>>>>>
>>>>>>>I am having an issue with Paris all of a sudden. When I try to launch
>>>>>
>>>>>it
>>>>>
>>>>>
>>>>>>>goes through the opening process and then when I should see the main
>>>
>>>>>>>screen,
>>>>>>>it disappears completely. If I try to launch again, it shuts the computer
>>>>>>>down.
>>>>>>>
>>>>>>>I have been running Paris for the past two years without much trouble
>>>>>
>>>>>on
>>>>>
>>>>>
>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>
>> (HP
>>
>>>>>
>>>>>>>dualcore
>>>>>>>running XP sp2)
>>>>>>>
>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>
>>>fixed
>>>
>>>>>>>the problem. I tried to run Paris after running a restore point, but
>>>
>>>that
>>>
>>>>>>>didn't work.
>>>>>>>
>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU completely
>>>>>>>before reinstalling Paris?
>>>>>>>
>>>>>>>Can anyone help me with this problem?
>>>>>>>
>>>>>>>
>>>>>>>Thanks,
>>>>>>>Mike
>>>>>>
>>>>>>
>>
>In you paris.cfg file add
>
>DisableDirectx=1
>
>See if not load the dx plugs will allow you in. Did you also
>delete/rename the default project?
>
>Jeff
Re: Please help with Paris Issue UPDATE [message #100978 is a reply to message #100974] Thu, 06 November 2008 14:59 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
I started going through my DX plugs, but all the plugs in there I have been
using for years. I "unwrapped" the VSTs and deleted some DX's. Why would
they cause a problem now?

Is it possible that a DX plug for my video apps are causing an issue even
though they are not audio processors?


"Rob Arsenault" <mani1147athotmaildotcom> wrote:
>
>"Mike P" <mikep@hometownrecords.com> wrote in message
>news:49133e9e$1@linux...
>>
>> No, it isn't disabled. Should it be?
>
>
>If your not using any VSTs, you could disable it, probably not rel

ated to
>your problem thow but worth a shot. Also, try what Jeff said and disable

>DXplugs in your config file, good idea.
>
>
>
>
>
>
>
>>>news:491333c9$1@linux...
>>>>
>>>> It is still not working, however I noticed that it only loads until
it
>>
>>>> gets
>>>> to loading the DirectX effects, that is when it crashes.
>>>>
>>>> Help.
>>>>
>>>>
>>>> "Mike P" <mikep@hometownrecords.com> wrote:
>>>>>
>>>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
>> from
>>>>>the C drive. Reinstalled both and it loaded perfectly twice. Then the
>>
>>>>>third
>>>>>launch it disappeared after the splash screen again?
>>>>>
>>>>>What could be causing this?? HELP!!!
>>>>>
>>>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>>>>Mike P wrote:
>>>>>>> Correct, I just changed some plugins (waves) which must have
>>>>>>> disrupted
>>>>>things.
>>>>>>>
>>>>>>>
>>>>>>> I have 2 EDS cards.
>>>>>>>
>>>>>>> After I reinstall Paris, it will work once, then it gives me errors
>>
>>>>>>> after
>>>>>>> that.
>>>>>>>
>>>>>>> Should I reinstall the subsystem as well?
>>>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris,

>>>>>>then
>>>>>
>>>>>>the subsystem. THe other thing is try starting without a default
>>>>>>project in the Paris directory adn see if the problem persists.
>>>>>>
>>>>>>Jeff
>>>>>>
>>>>>>> "Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>>>
>>>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>>>
>>>>>>>>correct? I would backup my 3 Paris config files, then try
>>>>>>>>uninstalling
>>>>>and
>>>>>>>
>>>>>>>
>>>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>>>Keep us posted.
>>>>>>>>Good luck
>>>>>>>>Rob
>>>>>>>>
>>>>>>>>
>>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>>>news:4912221d$1@linux...
>>>>>>>>
>>>>>>>>>Hello All,
>>>>>>>>>
>>>>>>>>>It has been a while since I have posted, hope everyone is doing

>>>>>>>>>well.
>>>>>>>>>
>>>>>>>>>I am having an issue with Paris all of a sudden. When I try to
>>>>>>>>>launch
>>>>>>>
>>>>>>> it
>>>>>>>
>>>>>>>>>goes through the opening process and then when I should see the
main
>>>>>
>>>>>>>>>screen,
>>>>>>>>>it disappears completely. If I try to launch again, it shuts the
>>>>>>>>>computer
>>>>>>>>>down.
>>>>>>>>>
>>>>>>>>>I have been running Paris for the past two years without much
>>>>>>>>>trouble
>>>>>>>
>>>>>>> on
>>>>>>>
>>>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>>> (HP
>>>>>>>
>>>>>>>
>>>>>>>>>dualcore
>>>>>>>>>running XP sp2)
>>>>>>>>>
>>>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>>>fixed
>>>>>>>>>the problem. I tried to run Paris after running a restore point,
but
>>>>>that
>>>>>>>>>didn't work.
>>>>>>>>>
>>>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>>>>completely
>>>>>>>>>before reinstalling Paris?
>>>>>>>>>
>>>>>>>>>Can anyone help me with this problem?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>Thanks,
>>>>>>>>>Mike
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>
Re: Please help with Paris Issue UPDATE [message #100980 is a reply to message #100978] Thu, 06 November 2008 15:36 Go to previous messageGo to next message
JeffH is currently offline  JeffH   UNITED STATES
Messages: 307
Registered: October 2007
Location: Wamic, OR
Senior Member
Mike,

I think a while back Dimitrios talked about improved stability by
wrapping all dx plugs in a vst wrapper and leaving the DisableDirectx
parameter on =1)

As to why they suddenly stop working, there's a whole long schpeel I
give people about magnetic media and degradation of systems over time.
Used always clean off and reinstall my whole system once a year for good
measure.

Jeff

> I started going through my DX plugs, but all the plugs in there I have been
> using for years. I "unwrapped" the VSTs and deleted some DX's. Why would
> they cause a problem now?
>
> Is it possible that a DX plug for my video apps are causing an issue even
> though they are not audio processors?
>
>
> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>
>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>news:49133e9e$1@linux...
>>
>>>No, it isn't disabled. Should it be?
>>
>>
>>If your not using any VSTs, you could disable it, probably not rel
>
>
> ated to
>
>>your problem thow but worth a shot. Also, try what Jeff said and disable
>
>
>>DXplugs in your config file, good idea.
>>
>>
>>
>>
>>
>>
>>
>>
>>>>news:491333c9$1@linux...
>>>>
>>>>>It is still not working, however I noticed that it only loads until
>
> it
>
>>>>>gets
>>>>>to loading the DirectX effects, that is when it crashes.
>>>>>
>>>>>Help.
>>>>>
>>>>>
>>>>>"Mike P" <mikep@hometownrecords.com> wrote:
>>>>>
>>>>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
>>>
>>>from
>>>
>>>>>>the C drive. Reinstalled both and it loaded perfectly twice. Then the
>>>
>>>>>>third
>>>>>>launch it disappeared after the splash screen again?
>>>>>>
>>>>>>What could be causing this?? HELP!!!
>>>>>>
>>>>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>>>>
>>>>>>>Mike P wrote:
>>>>>>>
>>>>>>>>Correct, I just changed some plugins (waves) which must have
>>>>>>>>disrupted
>>>>>>
>>>>>>things.
>>>>>>
>>>>>>>>
>>>>>>>>I have 2 EDS cards.
>>>>>>>>
>>>>>>>>After I reinstall Paris, it will work once, then it gives me errors
>>>
>>>>>>>>after
>>>>>>>>that.
>>>>>>>>
>>>>>>>>Should I reinstall the subsystem as well?
>>>>>>>
>>>>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris,
>
>
>>>>>>>then
>>>>>>
>>>>>>>the subsystem. THe other thing is try starting without a default
>>>>>>>project in the Paris directory adn see if the problem persists.
>>>>>>>
>>>>>>>Jeff
>>>>>>>
>>>>>>>
>>>>>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>>>>
>>>>>>>>>correct? I would backup my 3 Paris config files, then try
>>>>>>>>>uninstalling
>>>>>>
>>>>>>and
>>>>>>
>>>>>>>>
>>>>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>>>>Keep us posted.
>>>>>>>>>Good luck
>>>>>>>>>Rob
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>>>>news:4912221d$1@linux...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>Hello All,
>>>>>>>>>>
>>>>>>>>>>It has been a while since I have posted, hope everyone is doing
>
>
>>>>>>>>>>well.
>>>>>>>>>>
>>>>>>>>>>I am having an issue with Paris all of a sudden. When I try to
>>>>>>>>>>launch
>>>>>>>>
>>>>>>>>it
>>>>>>>>
>>>>>>>>
>>>>>>>>>>goes through the opening process and then when I should see the
>
> main
>
>>>>>>>>>>screen,
>>>>>>>>>>it disappears completely. If I try to launch again, it shuts the
>>>>>>>>>>computer
>>>>>>>>>>down.
>>>>>>>>>>
>>>>>>>>>>I have been running Paris for the past two years without much
>>>>>>>>>>trouble
>>>>>>>>
>>>>>>>>on
>>>>>>>>
>>>>>>>>
>>>>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>>>>
>>>>>(HP
>>>>>
>>>>>>>>
>>>>>>>>>>dualcore
>>>>>>>>>>running XP sp2)
>>>>>>>>>>
>>>>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>>>>
>>>>>>fixed
>>>>>>
>>>>>>>>>>the problem. I tried to run Paris after running a restore point,
>
> but
>
>>>>>>that
>>>>>>
>>>>>>>>>>didn't work.
>>>>>>>>>>
>>>>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>>>>>completely
>>>>>>>>>>before reinstalling Paris?
>>>>>>>>>>
>>>>>>>>>>Can anyone help me with this problem?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>Thanks,
>>>>>>>>>>Mike
>>>>>>>>>
>>>>>>>>>
>>>>
>>
>
Re: Please help with Paris Issue UPDATE [message #100981 is a reply to message #100980] Thu, 06 November 2008 19:10 Go to previous messageGo to next message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
Do you have any ideas for configuration settings? I can't remember where I
had them set before the crash.

I have it working now, I uninstalled all of my Video editing apps and tons
of plugins that I don't really use. There is still something in there that
is not playing nice with others but I can consistantly get it back up and
running after a reboot.

Jeff Hoover <jkhoover@excite.com> wrote:
>Mike,
>
>I think a while back Dimitrios talked about improved stability by
>wrapping all dx plugs in a vst wrapper and leaving the DisableDirectx
>parameter on =1)
>
>As to why they suddenly stop working, there's a whole long schpeel I
>give people about magnetic media and degradation of systems over time.
>Used always clean off and reinstall my whole system once a year for good

>measure.
>
>Jeff
>
>> I started going through my DX plugs, but all the plugs in there I have
been
>> using for years. I "unwrapped" the VSTs and deleted some DX's. Why would
>> they cause a problem now?
>>
>> Is it possible that a DX plug for my video apps are causing an issue even
>> though they are not audio processors?
>>
>>
>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>
>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>news:49133e9e$1@linux...
>>>
>>>>No, it isn't disabled. Should it be?
>>>
>>>
>>>If your not using any VSTs, you could disable it, probably not rel
>>
>>
>> ated to
>>
>>>your problem thow but worth a shot. Also, try what Jeff said and disable
>>
>>
>>>DXplugs in your config file, good idea.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>>>news:491333c9$1@linux...
>>>>>
>>>>>>It is still not working, however I noticed that it only loads until
>>
>> it
>>
>>>>>>gets
>>>>>>to loading the DirectX effects, that is when it crashes.
>>>>>>
>>>>>>Help.
>>>>>>
>>>>>>
>>>>>>"Mike P" <mikep@hometownrecords.com> wrote:
>>>>>>
>>>>>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
>>>>
>>>>from
>>>>
>>>>>>>the C drive. Reinstalled both and it loaded perfectly twice. Then
the
>>>>
>>>>>>>third
>>>>>>>launch it disappeared after the splash screen again?
>>>>>>>
>>>>>>>What could be causing this?? HELP!!!
>>>>>>>
>>>>>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>>>>>
>>>>>>>>Mike P wrote:
>>>>>>>>
>>>>>>>>>Correct, I just changed some plugins (waves) which must have
>>>>>>>>>disrupted
>>>>>>>
>>>>>>>things.
>>>>>>>
>>>>>>>>>
>>>>>>>>>I have 2 EDS cards.
>>>>>>>>>
>>>>>>>>>After I reinstall Paris, it will work once, then it gives me errors
>>>>
>>>>>>>>>after
>>>>>>>>>that.
>>>>>>>>>
>>>>>>>>>Should I reinstall the subsystem as well?
>>>>>>>>
>>>>>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris,
>>
>>
>>>>>>>>then
>>>>>>>
>>>>>>>>the subsystem. THe other thing is try starting without a default
>>>>>>>>project in the Paris directory adn see if the problem persists.
>>>>>>>>
>>>>>>>>Jeff
>>>>>>>>
>>>>>>>>
>>>>>>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>>>>>
>>>>>>>>>>correct? I would backup my 3 Paris config files, then try
>>>>>>>>>>uninstalling
>>>>>>>
>>>>>>>and
>>>>>>>
>>>>>>>>>
>>>>>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>>>>>Keep us posted.
>>>>>>>>>>Good luck
>>>>>>>>>>Rob
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>>>>>news:4912221d$1@linux...
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>Hello All,
>>>>>>>>>>>
>>>>>>>>>>>It has been a while since I have posted, hope everyone is doing
>>
>>
>>>>>>>>>>>well.
>>>>>>>>>>>
>>>>>>>>>>>I am having an issue with Paris all of a sudden. When I try to

>>>>>>>>>>>launch
>>>>>>>>>
>>>>>>>>>it
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>>goes through the opening process and then when I should see the
>>
>> main
>>
>>>>>>>>>>>screen,
>>>>>>>>>>>it disappears completely. If I try to launch again, it shuts the
>>>>>>>>>>>computer
>>>>>>>>>>>down.
>>>>>>>>>>>
>>>>>>>>>>>I have been running Paris for the past two years without much

>>>>>>>>>>>trouble
>>>>>>>>>
>>>>>>>>>on
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>>>>>
>>>>>>(HP
>>>>>>
>>>>>>>>>
>>>>>>>>>>>dualcore
>>>>>>>>>>>running XP sp2)
>>>>>>>>>>>
>>>>>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>>>>>
>>>>>>>fixed
>>>>>>>
>>>>>>>>>>>the problem. I tried to run Paris after running a restore point,
>>
>> but
>>
>>>>>>>that
>>>>>>>
>>>>>>>>>>>didn't work.
>>>>>>>>>>>
>>>>>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>>>>>>completely
>>>>>>>>>>>before reinstalling Paris?
>>>>>>>>>>>
>>>>>>>>>>>Can anyone help me with this problem?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>Thanks,
>>>>>>>>>>>Mike
>>>>>>>>>>
>>>>>>>>>>
>>>>>
>>>
>>
Re: Please help with Paris Issue UPDATE [message #100982 is a reply to message #100981] Fri, 07 November 2008 03:39 Go to previous messageGo to next message
Kim W is currently offline  Kim W
Messages: 165
Registered: July 2006
Senior Member
FWIW, I found that this freeware utility was better than
Analog-X's offering, in that you can disable/re-enable DX plugs
at will, for troubleshooting purposes.
Best to reboot before launching Paris.

http://pagesperso-orange.fr/vb-audio/us/mm/plugman/vb_plugma n.htm

Best of luck.

Kim


"Mike p" <mikep@hometownrecords.com> wrote:
>
>Do you have any ideas for configuration settings? I can't remember where
I
>had them set before the crash.
>
>I have it working now, I uninstalled all of my Video editing apps and tons
>of plugins that I don't really use. There is still something in there that
>is not playing nice with others but I can consistantly get it back up and
>running after a reboot.
>
>Jeff Hoover <jkhoover@excite.com> wrote:
>>Mike,
>>
>>I think a while back Dimitrios talked about improved stability by
>>wrapping all dx plugs in a vst wrapper and leaving the DisableDirectx
>>parameter on =1)
>>
>>As to why they suddenly stop working, there's a whole long schpeel I
>>give people about magnetic media and degradation of systems over time.

>>Used always clean off and reinstall my whole system once a year for good
>
>>measure.
>>
>>Jeff
>>
>>> I started going through my DX plugs, but all the plugs in there I have
>been
>>> using for years. I "unwrapped" the VSTs and deleted some DX's. Why would
>>> they cause a problem now?
>>>
>>> Is it possible that a DX plug for my video apps are causing an issue
even
>>> though they are not audio processors?
>>>
>>>
>>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>>
>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>news:49133e9e$1@linux...
>>>>
>>>>>No, it isn't disabled. Should it be?
>>>>
>>>>
>>>>If your not using any VSTs, you could disable it, probably not rel
>>>
>>>
>>> ated to
>>>
>>>>your problem thow but worth a shot. Also, try what Jeff said and disable
>>>
>>>
>>>>DXplugs in your config file, good idea.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>>news:491333c9$1@linux...
>>>>>>
>>>>>>>It is still not working, however I noticed that it only loads until
>>>
>>> it
>>>
>>>>>>>gets
>>>>>>>to loading the DirectX effects, that is when it crashes.
>>>>>>>
>>>>>>>Help.
>>>>>>>
>>>>>>>
>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote:
>>>>>>>
>>>>>>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
>>>>>
>>>>>from
>>>>>
>>>>>>>>the C drive. Reinstalled both and it loaded perfectly twice. Then
>the
>>>>>
>>>>>>>>third
>>>>>>>>launch it disappeared after the splash screen again?
>>>>>>>>
>>>>>>>>What could be causing this?? HELP!!!
>>>>>>>>
>>>>>>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>>>>>>
>>>>>>>>>Mike P wrote:
>>>>>>>>>
>>>>>>>>>>Correct, I just changed some plugins (waves) which must have
>>>>>>>>>>disrupted
>>>>>>>>
>>>>>>>>things.
>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>I have 2 EDS cards.
>>>>>>>>>>
>>>>>>>>>>After I reinstall Paris, it will work once, then it gives me errors
>>>>>
>>>>>>>>>>after
>>>>>>>>>>that.
>>>>>>>>>>
>>>>>>>>>>Should I reinstall the subsystem as well?
>>>>>>>>>
>>>>>>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris,
>>>
>>>
>>>>>>>>>then
>>>>>>>>
>>>>>>>>>the subsystem. THe other thing is try starting without a default
>>>>>>>>>project in the Paris directory adn see if the problem persists.
>>>>>>>>>
>>>>>>>>>Jeff
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>>>>>>
>>>>>>>>>>>correct? I would backup my 3 Paris config files, then try
>>>>>>>>>>>uninstalling
>>>>>>>>
>>>>>>>>and
>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>>>>>>Keep us posted.
>>>>>>>>>>>Good luck
>>>>>>>>>>>Rob
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>>>>>>news:4912221d$1@linux...
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>Hello All,
>>>>>>>>>>>>
>>>>>>>>>>>>It has been a while since I have posted, hope everyone is doing
>>>
>>>
>>>>>>>>>>>>well.
>>>>>>>>>>>>
>>>>>>>>>>>>I am having an issue with Paris all of a sudden. When I try to
>
>>>>>>>>>>>>launch
>>>>>>>>>>
>>>>>>>>>>it
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>goes through the opening process and then when I should see the
>>>
>>> main
>>>
>>>>>>>>>>>>screen,
>>>>>>>>>>>>it disappears completely. If I try to launch again, it shuts
the
>>>>>>>>>>>>computer
>>>>>>>>>>>>down.
>>>>>>>>>>>>
>>>>>>>>>>>>I have been running Paris for the past two years without much
>
>>>>>>>>>>>>trouble
>>>>>>>>>>
>>>>>>>>>>on
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>>>>>>
>>>>>>>(HP
>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>dualcore
>>>>>>>>>>>>running XP sp2)
>>>>>>>>>>>>
>>>>>>>>>>>>I uninstalled the new plugs and also re-installed Paris, but
neither
>>>>>>>>
>>>>>>>>fixed
>>>>>>>>
>>>>>>>>>>>>the problem. I tried to run Paris after running a restore point,
>>>
>>> but
>>>
>>>>>>>>that
>>>>>>>>
>>>>>>>>>>>>didn't work.
>>>>>>>>>>>>
>>>>>>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>>>>>>>completely
>>>>>>>>>>>>before reinstalling Paris?
>>>>>>>>>>>>
>>>>>>>>>>>>Can anyone help me with this problem?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>Thanks,
>>>>>>>>>>>>Mike
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>
>>>>
>>>
>
Re: Please help with Paris Issue UPDATE [message #100990 is a reply to message #100976] Fri, 07 November 2008 11:30 Go to previous messageGo to next message
Robert is currently offline  Robert   CANADA
Messages: 127
Registered: May 2007
Senior Member
Good news Mike, keep us posted about the naughty DX plug.
Rob


> Disabling the directx fixed the problem, I guess I will have to go through
> the plugs one at a time to find the culprit.
>
> Thanks so much for your help!
>
> Jeff Hoover <jkhoover@excite.com> wrote:
>>Mike P wrote:
>>> It is still not working, however I noticed that it only loads until it
> gets
>>> to loading the DirectX effects, that is when it crashes.
>>>
>>> Help.
>>>
>>>
>>> "Mike P" <mikep@hometownrecords.com> wrote:
>>>
>>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
> from
>>>>the C drive. Reinstalled both and it loaded perfectly twice. Then the
> third
>>>>launch it disappeared after the splash screen again?
>>>>
>>>>What could be causing this?? HELP!!!
>>>>
>>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>>
>>>>>Mike P wrote:
>>>>>
>>>>>>Correct, I just changed some plugins (waves) which must have disrupted
>>>>
>>>>things.
>>>>
>>>>>>
>>>>>>I have 2 EDS cards.
>>>>>>
>>>>>>After I reinstall Paris, it will work once, then it gives me errors
> after
>>>>>>that.
>>>>>>
>>>>>>Should I reinstall the subsystem as well?
>>>>>
>>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris,
>>>>>then
>>>>
>>>>>the subsystem. THe other thing is try starting without a default
>>>>>project in the Paris directory adn see if the problem persists.
>>>>>
>>>>>Jeff
>>>>>
>>>>>
>>>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>>
>>>>>>
>>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>>
>>>>>>>correct? I would backup my 3 Paris config files, then try
>>>>>>>uninstalling
>>>>
>>>>and
>>>>
>>>>>>
>>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>>Keep us posted.
>>>>>>>Good luck
>>>>>>>Rob
>>>>>>>
>>>>>>>
>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>>news:4912221d$1@linux...
>>>>>>>
>>>>>>>
>>>>>>>>Hello All,
>>>>>>>>
>>>>>>>>It has been a while since I have posted, hope everyone is doing
>>>>>>>>well.
>>>>>>>>
>>>>>>>>I am having an issue with Paris all of a sudden. When I try to
>>>>>>>>launch
>>>>>>
>>>>>>it
>>>>>>
>>>>>>
>>>>>>>>goes through the opening process and then when I should see the main
>>>>
>>>>>>>>screen,
>>>>>>>>it disappears completely. If I try to launch again, it shuts the
>>>>>>>>computer
>>>>>>>>down.
>>>>>>>>
>>>>>>>>I have been running Paris for the past two years without much
>>>>>>>>trouble
>>>>>>
>>>>>>on
>>>>>>
>>>>>>
>>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>>
>>> (HP
>>>
>>>>>>
>>>>>>>>dualcore
>>>>>>>>running XP sp2)
>>>>>>>>
>>>>>>>>I uninstalled the new plugs and also re-installed Paris, but neither
>>>>
>>>>fixed
>>>>
>>>>>>>>the problem. I tried to run Paris after running a restore point, but
>>>>
>>>>that
>>>>
>>>>>>>>didn't work.
>>>>>>>>
>>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>>>completely
>>>>>>>>before reinstalling Paris?
>>>>>>>>
>>>>>>>>Can anyone help me with this problem?
>>>>>>>>
>>>>>>>>
>>>>>>>>Thanks,
>>>>>>>>Mike
>>>>>>>
>>>>>>>
>>>
>>In you paris.cfg file add
>>
>>DisableDirectx=1
>>
>>See if not load the dx plugs will allow you in. Did you also
>>delete/rename the default project?
>>
>>Jeff
>
Re: Please help with Paris Issue UPDATE [message #100992 is a reply to message #100982] Fri, 07 November 2008 15:22 Go to previous message
mikep[1] is currently offline  mikep[1]
Messages: 27
Registered: July 2007
Junior Member
Thanks Kim, I wish I had this Plugin yesterday. The AnalogX DXMan doesn't
allow you to disable, only remove.

Greatly appreciated.

"Kim W." <no@way.com> wrote:
>
>FWIW, I found that this freeware utility was better than
>Analog-X's offering, in that you can disable/re-enable DX plugs
>at will, for troubleshooting purposes.
>Best to reboot before launching Paris.
>
> http://pagesperso-orange.fr/vb-audio/us/mm/plugman/vb_plugma n.htm
>
>B

est of luck.
>
>Kim
>
>
>"Mike p" <mikep@hometownrecords.com> wrote:
>>
>>Do you have any ideas for configuration settings? I can't remember where
>I
>>had them set before the crash.
>>
>>I have it working now, I uninstalled all of my Video editing apps and tons
>>of plugins that I don't really use. There is still something in there that
>>is not playing nice with others but I can consistantly get it back up and
>>running after a reboot.
>>
>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>Mike,
>>>
>>>I think a while back Dimitrios talked about improved stability by
>>>wrapping all dx plugs in a vst wrapper and leaving the DisableDirectx

>>>parameter on =1)
>>>
>>>As to why they suddenly stop working, there's a whole long schpeel I
>>>give people about magnetic media and degradation of systems over time.
>
>>>Used always clean off and reinstall my whole system once a year for good
>>
>>>measure.
>>>
>>>Jeff
>>>
>>>> I started going through my DX plugs, but all the plugs in there I have
>>been
>>>> using for years. I "unwrapped" the VSTs and deleted some DX's. Why would
>>>> they cause a problem now?
>>>>
>>>> Is it possible that a DX plug for my video apps are causing an issue
>even
>>>> though they are not audio processors?
>>>>
>>>>
>>>> "Rob Arsenault" <mani1147athotmaildotcom> wrote:
>>>>
>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>news:49133e9e$1@linux...
>>>>>
>>>>>>No, it isn't disabled. Should it be?
>>>>>
>>>>>
>>>>>If your not using any VSTs, you could disable it, probably not rel
>>>>
>>>>
>>>> ated to
>>>>
>>>>>your problem thow but worth a shot. Also, try what Jeff said and disable
>>>>
>>>>
>>>>>DXplugs in your config file, good idea.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>>news:491333c9$1@linux...
>>>>>>>
>>>>>>>>It is still not working, however I noticed that it only loads until
>>>>
>>>> it
>>>>
>>>>>>>>gets
>>>>>>>>to loading the DirectX effects, that is when it crashes.
>>>>>>>>
>>>>>>>>Help.
>>>>>>>>
>>>>>>>>
>>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote:
>>>>>>>>
>>>>>>>>>I uninstalled both Paris and the subsystem and deleted the EMU folder
>>>>>>
>>>>>>from
>>>>>>
>>>>>>>>>the C drive. Reinstalled both and it loaded perfectly twice. Then
>>the
>>>>>>
>>>>>>>>>third
>>>>>>>>>launch it disappeared after the splash screen again?
>>>>>>>>>
>>>>>>>>>What could be causing this?? HELP!!!
>>>>>>>>>
>>>>>>>>>Jeff Hoover <jkhoover@excite.com> wrote:
>>>>>>>>>
>>>>>>>>>>Mike P wrote:
>>>>>>>>>>
>>>>>>>>>>>Correct, I just changed some plugins (waves) which must have
>>>>>>>>>>>disrupted
>>>>>>>>>
>>>>>>>>>things.
>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>I have 2 EDS cards.
>>>>>>>>>>>
>>>>>>>>>>>After I reinstall Paris, it will work once, then it gives me errors
>>>>>>
>>>>>>>>>>>after
>>>>>>>>>>>that.
>>>>>>>>>>>
>>>>>>>>>>>Should I reinstall the subsystem as well?
>>>>>>>>>>
>>>>>>>>>>Yes. Might be a good a idea to reinstall all...the scherzo, paris,
>>>>
>>>>
>>>>>>>>>>then
>>>>>>>>>
>>>>>>>>>>the subsystem. THe other thing is try starting without a default
>>>>>>>>>>project in the Paris directory adn see if the problem persists.
>>>>>>>>>>
>>>>>>>>>>Jeff
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>"Rob_A" <mani1147athotmaildotcom> wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>So Mike, you haven't changed any hardware in this box, only software,
>>>>>>>>>
>>>>>>>>>>>>correct? I would backup my 3 Paris config files, then try
>>>>>>>>>>>>uninstalling
>>>>>>>>>
>>>>>>>>>and
>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>removing Paris completely and then re-install. How many EDS cards?
>>>>>>>>>>>>Keep us posted.
>>>>>>>>>>>>Good luck
>>>>>>>>>>>>Rob
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>"Mike P" <mikep@hometownrecords.com> wrote in message
>>>>>>>>>>>>news:4912221d$1@linux...
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>Hello All,
>>>>>>>>>>>>>
>>>>>>>>>>>>>It has been a while since I have posted, hope everyone is doing
>>>>
>>>>
>>>>>>>>>>>>>well.
>>>>>>>>>>>>>
>>>>>>>>>>>>>I am having an issue with Paris all of a sudden. When I try
to
>>
>>>>>>>>>>>>>launch
>>>>>>>>>>>
>>>>>>>>>>>it
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>>goes through the opening process and then when I should see
the
>>>>
>>>> main
>>>>
>>>>>>>>>>>>>screen,
>>>>>>>>>>>>>it disappears completely. If I try to launch again, it shuts
>the
>>>>>>>>>>>>>computer
>>>>>>>>>>>>>down.
>>>>>>>>>>>>>
>>>>>>>>>>>>>I have been running Paris for the past two years without much
>>
>>>>>>>>>>>>>trouble
>>>>>>>>>>>
>>>>>>>>>>>on
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>>this computer, but today I loaded some new plugs and this happened.
>>>>>>>>
>>>>>>>>(HP
>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>>dualcore
>>>>>>>>>>>>>running XP sp2)
>>>>>>>>>>>>>
>>>>>>>>>>>>>I uninstalled the new plugs and also re-installed Paris, but
>neither
>>>>>>>>>
>>>>>>>>>fixed
>>>>>>>>>
>>>>>>>>>>>>>the problem. I tried to run Paris after running a restore point,
>>>>
>>>> but
>>>>
>>>>>>>>>that
>>>>>>>>>
>>>>>>>>>>>>>didn't work.
>>>>>>>>>>>>>
>>>>>>>>>>>>>I am wondering if I need to uninstall Paris and delete the EMU
>>>>>>>>>>>>>completely
>>>>>>>>>>>>>before reinstalling Paris?
>>>>>>>>>>>>>
>>>>>>>>>>>>>Can anyone help me with this problem?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>Thanks,
>>>>>>>>>>>>>Mike
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>
>>>>
>>
>
Previous Topic: missing EDS card in Device Manager plus freezing issues question
Next Topic: This is fun
Goto Forum:
  


Current Time: Sun Dec 22 15:51:41 PST 2024

Total time taken to generate the page: 0.01494 seconds