Home » The PARIS Forums » PARIS: Main » Replacement MEC fans (size, low noise)
| Replacement MEC fans (size, low noise) [message #65281] |
Thu, 09 March 2006 11:11  |
Dan B
Messages: 54
Registered: June 2005
|
Member |
|
|
Hi,
My MEC fan seems to have got progressively louder over the years. I'm hoping
to start tracking in the same room as my MEC. I heard a replacement fan may
be all that's required. Can anyone recommend something quiet to do the job.
Any tips on quieting down pcs (on the cheap!) - e.g. iso boxes, etc - most
welcome.
Thanks,
Dan
|
|
|
|
| Re: Replacement MEC fans (size, low noise) [message #65284 is a reply to message #65281] |
Thu, 09 March 2006 10:39  |
Suad
Messages: 62
Registered: October 2005
|
Member |
|
|
Try PAPST 80mm 12V fans. (made in germany)
There are two interesting models:
PAPST 80mm, 12dB, N/2GLE
PAPST 80mm, 19dB, N/2GMLE
All are top quality, excelent airflow and quiet.
Note that lower noise means slower spin speed...
....so I think 12db (decibel) model which rotates
at cca1500rpm is ok for most MECs.
But, if your MEC is crowded with expansion cards (4 or more)
, go for 19db model (cca2000rpm)
They are not cheap, but they are good.
Also note that a little soldering must be made
to move connector from old fan to new...
Papst has 3 wires:
Blue (-) minus
Red (+) 12v plus
White (rotation) - N/C on paris psu.
Cheers.
Suad
"Dan B" <daniel_burneNOSPAM@yahoo.com> wrote in message
news:44106fce$1@linux...
>
> Hi,
> My MEC fan seems to have got progressively louder over the years. I'm
hoping
> to start tracking in the same room as my MEC. I heard a replacement fan
may
> be all that's required. Can anyone recommend something quiet to do the
job.
>
>
> Any tips on quieting down pcs (on the cheap!) - e.g. iso boxes, etc - most
> welcome.
>
> Thanks,
> Dan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Replacement MEC fans (size, low noise) [message #65317 is a reply to message #65310] |
Fri, 10 March 2006 19:05 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
Havent pulled it apart yet, but should be pretty easy I would imagine,
compared to a computer. If its a solder in, you may need some experience
here, and if its not marked you may need a voltmeter.
"John" <no@no.com> wrote in message news:4411da71@linux...
> I was actually looking for a serious answer if anyone knows. Or was
> that serious. hehe
>
> Edna wrote:
> > or dynamite :0
> >
> > "Don Nafe" <dnafe@magma.ca> wrote in message news:44117ce5@linux...
> >
> >>Nope, sledge hammer works just fine
> >>
> >>;-)
> >>
> >>don
> >>
> >>"John" <no@no.com> wrote in message news:44117953@linux...
> >>
> >>>Is the MEC hard to take apart to replace the fan?
> >>>
> >>>rick wrote:
> >>>
> >>>>yeah but that usually involves a second language and a lot of noxema.
> >>>>
> >>>>On Thu, 09 Mar 2006 15:48:43 -0700, EK Sound <askme@nospam.com> wrote:
> >>>>
> >>>>
> >>>>
> >>>>>Or a cute Geisha with a fan... ;-)
> >>>>>
> >>>>>David.
> >>>>>
> >>>>>DJ wrote:
> >>>>>
> >>>>>
> >>>>>>Get a Pabst fan
> >>>>>>
> >>>>>>www.plycon.com
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>"Dan B" <daniel_burneNOSPAM@yahoo.com> wrote in message
> >>>>>>news:44106fce$1@linux...
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>Hi,
> >>>>>>>My MEC fan seems to have got progressively louder over the years.
I'm
> >>>>>>
> >>>>>>hoping
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>to start tracking in the same room as my MEC. I heard a replacement
> >
> > fan
> >
> >>>>>>may
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>be all that's required. Can anyone recommend something quiet to do
> >
> > the
> >
> >>>>>>job.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>Any tips on quieting down pcs (on the cheap!) - e.g. iso boxes,
etc -
> >>>>>>>most
> >>>>>>>welcome.
> >>>>>>>
> >>>>>>>Thanks,
> >>>>>>>Dan
> >>>>>>
> >>>>>>
> >>>>>>
> >>
> >
> >
|
|
|
|
| Re: Replacement MEC fans (size, low noise) [message #65323 is a reply to message #65317] |
Sat, 11 March 2006 02:46 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
nope just the 9 screws on the side and the 4 fan screws.s.
On Fri, 10 Mar 2006 21:05:59 -0600, "Edna" <edna@texomaonline.com>
wrote:
>Havent pulled it apart yet, but should be pretty easy I would imagine,
>compared to a computer. If its a solder in, you may need some experience
>here, and if its not marked you may need a voltmeter.
>
>"John" <no@no.com> wrote in message news:4411da71@linux...
>> I was actually looking for a serious answer if anyone knows. Or was
>> that serious. hehe
>>
>> Edna wrote:
>> > or dynamite :0
>> >
>> > "Don Nafe" <dnafe@magma.ca> wrote in message news:44117ce5@linux...
>> >
>> >>Nope, sledge hammer works just fine
>> >>
>> >>;-)
>> >>
>> >>don
>> >>
>> >>"John" <no@no.com> wrote in message news:44117953@linux...
>> >>
>> >>>Is the MEC hard to take apart to replace the fan?
>> >>>
>> >>>rick wrote:
>> >>>
>> >>>>yeah but that usually involves a second language and a lot of noxema.
>> >>>>
>> >>>>On Thu, 09 Mar 2006 15:48:43 -0700, EK Sound <askme@nospam.com> wrote:
>> >>>>
>> >>>>
>> >>>>
>> >>>>>Or a cute Geisha with a fan... ;-)
>> >>>>>
>> >>>>>David.
>> >>>>>
>> >>>>>DJ wrote:
>> >>>>>
>> >>>>>
>> >>>>>>Get a Pabst fan
>> >>>>>>
>> >>>>>>www.plycon.com
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>"Dan B" <daniel_burneNOSPAM@yahoo.com> wrote in message
>> >>>>>>news:44106fce$1@linux...
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>>Hi,
>> >>>>>>>My MEC fan seems to have got progressively louder over the years.
>I'm
>> >>>>>>
>> >>>>>>hoping
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>>to start tracking in the same room as my MEC. I heard a replacement
>> >
>> > fan
>> >
>> >>>>>>may
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>>be all that's required. Can anyone recommend something quiet to do
>> >
>> > the
>> >
>> >>>>>>job.
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>>Any tips on quieting down pcs (on the cheap!) - e.g. iso boxes,
>etc -
>> >>>>>>>most
>> >>>>>>>welcome.
>> >>>>>>>
>> >>>>>>>Thanks,
>> >>>>>>>Dan
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>
>> >
>> >
>
|
|
|
|
| Re: Replacement MEC fans (size, low noise) [message #65478 is a reply to message #65323] |
Fri, 17 March 2006 05:47 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
Thanks rick !
rick wrote:
> nope just the 9 screws on the side and the 4 fan screws.s.
>
> On Fri, 10 Mar 2006 21:05:59 -0600, "Edna" <edna@texomaonline.com>
> wrote:
>
>
>>Havent pulled it apart yet, but should be pretty easy I would imagine,
>>compared to a computer. If its a solder in, you may need some experience
>>here, and if its not marked you may need a voltmeter.
>>
>>"John" <no@no.com> wrote in message news:4411da71@linux...
>>
>>>I was actually looking for a serious answer if anyone knows. Or was
>>>that serious. hehe
>>>
>>>Edna wrote:
>>>
>>>>or dynamite :0
>>>>
>>>>"Don Nafe" <dnafe@magma.ca> wrote in message news:44117ce5@linux...
>>>>
>>>>
>>>>>Nope, sledge hammer works just fine
>>>>>
>>>>>;-)
>>>>>
>>>>>don
>>>>>
>>>>>"John" <no@no.com> wrote in message news:44117953@linux...
>>>>>
>>>>>
>>>>>>Is the MEC hard to take apart to replace the fan?
>>>>>>
>>>>>>rick wrote:
>>>>>>
>>>>>>
>>>>>>>yeah but that usually involves a second language and a lot of noxema.
>>>>>>>
>>>>>>>On Thu, 09 Mar 2006 15:48:43 -0700, EK Sound <askme@nospam.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>Or a cute Geisha with a fan... ;-)
>>>>>>>>
>>>>>>>>David.
>>>>>>>>
>>>>>>>>DJ wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>Get a Pabst fan
>>>>>>>>>
>>>>>>>>>www.plycon.com
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>"Dan B" <daniel_burneNOSPAM@yahoo.com> wrote in message
>>>>>>>>>news:44106fce$1@linux...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>Hi,
>>>>>>>>>>My MEC fan seems to have got progressively louder over the years.
>>
>>I'm
>>
>>>>>>>>>hoping
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>to start tracking in the same room as my MEC. I heard a replacement
>>>>
>>>>fan
>>>>
>>>>
>>>>>>>>>may
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>be all that's required. Can anyone recommend something quiet to do
>>>>
>>>>the
>>>>
>>>>
>>>>>>>>>job.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>Any tips on quieting down pcs (on the cheap!) - e.g. iso boxes,
>>
>>etc -
>>
>>>>>>>>>>most
>>>>>>>>>>welcome.
>>>>>>>>>>
>>>>>>>>>>Thanks,
>>>>>>>>>>Dan
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>
>
|
|
|
|
Goto Forum:
Current Time: Mon Dec 23 09:25:13 PST 2024
Total time taken to generate the page: 0.03345 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
