The PARIS Forums: PARIS: Main » Does the RME HDSP driver support 4 x cards?

Home » The PARIS Forums » PARIS: Main » Does the RME HDSP driver support 4 x cards?

Show: Today's Messages :: Polls :: Message Navigator

Does the RME HDSP driver support 4 x cards? [message #93688]

Sun, 16 December 2007 12:21

Messages: 1124
Registered: July 2005

Senior Member

I need some more I/O. If I could add another Multiface (total of 4 x HDSP
PCI interfaces on my master DAW), my life would be perfect and I'd never
need to buy another piece of gear ever again.

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93689 is a reply to message #93688]

Sun, 16 December 2007 12:31

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

Hi DJ,
I think 3 is the limit at lest on the MADI card. I think you will break
your setup with the four card. PCI bus and especially memory address
range will probably reach a limit and things will start stepping on each
other.

Chris

DJ wrote:
> I need some more I/O. If I could add another Multiface (total of 4 x HDSP
> PCI interfaces on my master DAW), my life would be perfect and I'd never
> need to buy another piece of gear ever again.
>
>
>

--
Chris Ludwig

ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93692 is a reply to message #93689]

Sun, 16 December 2007 15:33

John [1]
Messages: 2229
Registered: September 2005

Senior Member

You should get about 10 million mic pres, that should do you !

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93702 is a reply to message #93689]

Sun, 16 December 2007 18:25

Messages: 1124
Registered: July 2005

Senior Member

Will the driver support it? I've got a free IRQ, guaranteed. I would just be
using it for some extra analog stereo output busses.

"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:47658c25$1@linux...
> Hi DJ,
> I think 3 is the limit at lest on the MADI card. I think you will break
> your setup with the four card. PCI bus and especially memory address range
> will probably reach a limit and things will start stepping on each other.
>
> Chris
>
>
> DJ wrote:
>> I need some more I/O. If I could add another Multiface (total of 4 x HDSP
>> PCI interfaces on my master DAW), my life would be perfect and I'd never
>> need to buy another piece of gear ever again.
>>
>>
>>
>
> --
> Chris Ludwig
>
> ADK Pro Audio
> (859) 635-5762
> www.adkproaudio.com
> chrisl@adkproaudio.com

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93706 is a reply to message #93688]

Sun, 16 December 2007 20:21

Graham Duncan

Messages: 147
Registered: December 2008

Senior Member

Why not trade a Multiface for a Digiface?

Graham

DJ wrote:
> I need some more I/O. If I could add another Multiface (total of 4 x HDSP
> PCI interfaces on my master DAW), my life would be perfect and I'd never
> need to buy another piece of gear ever again.
>
>
>

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93708 is a reply to message #93706]

Sun, 16 December 2007 21:29

Messages: 1124
Registered: July 2005

Senior Member

I need 24 inputs and 32 outputs........well.........it's not like if I don't
have that many, I will die, but it would make a couple of things here a bit
simpler.

;o)

"Graham Duncan" <graham@grahamduncan.com> wrote in message
news:4765fa3a$1@linux...
> Why not trade a Multiface for a Digiface?
>
> Graham
>
> DJ wrote:
>> I need some more I/O. If I could add another Multiface (total of 4 x HDSP
>> PCI interfaces on my master DAW), my life would be perfect and I'd never
>> need to buy another piece of gear ever again.
>>
>>

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93710 is a reply to message #93708]

Sun, 16 December 2007 22:19

audioguy_editout_

Messages: 249
Registered: December 2005

Senior Member

You need a console.... ;-)

David.

DJ wrote:

> I need 24 inputs and 32 outputs........well.........it's not like if I don't
> have that many, I will die, but it would make a couple of things here a bit
> simpler.
>
> ;o)
>
> "Graham Duncan" <graham@grahamduncan.com> wrote in message
> news:4765fa3a$1@linux...
>
>>Why not trade a Multiface for a Digiface?
>>
>>Graham
>>
>>DJ wrote:
>>
>>>I need some more I/O. If I could add another Multiface (total of 4 x HDSP
>>>PCI interfaces on my master DAW), my life would be perfect and I'd never
>>>need to buy another piece of gear ever again.
>>>
>>>
>
>

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93711 is a reply to message #93710]

Sun, 16 December 2007 22:22

Messages: 1124
Registered: July 2005

Senior Member

You got a DM2000 with 154 digital inputs and 154 digital outputs laying
around that you want to sell cheap? That would work for me.

;o)

"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
news:476615ac@linux...
> You need a console.... ;-)
>
> David.
>
> DJ wrote:
>
>> I need 24 inputs and 32 outputs........well.........it's not like if I
>> don't have that many, I will die, but it would make a couple of things
>> here a bit simpler.
>>
>> ;o)
>>
>> "Graham Duncan" <graham@grahamduncan.com> wrote in message
>> news:4765fa3a$1@linux...
>>
>>>Why not trade a Multiface for a Digiface?
>>>
>>>Graham
>>>
>>>DJ wrote:
>>>
>>>>I need some more I/O. If I could add another Multiface (total of 4 x
>>>>HDSP PCI interfaces on my master DAW), my life would be perfect and I'd
>>>>never need to buy another piece of gear ever again.
>>>>
>>>>
>>

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93717 is a reply to message #93711]

Mon, 17 December 2007 08:18

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI DJ,

2 MADI cards and a AES 32 card = 160 I/O
Even with the extra analog or digital converters attached to the MADI
cards it will still be cheaper than a console.

Oh and why do you need 152 channels to record a Punk Band?
I think you will become more creative if you are given more limitations. :)

Chris

DJ wrote:
> You got a DM2000 with 154 digital inputs and 154 digital outputs laying
> around that you want to sell cheap? That would work for me.
>
> ;o)
>
>
> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
> news:476615ac@linux...
>> You need a console.... ;-)
>>
>> David.
>>
>> DJ wrote:
>>
>>> I need 24 inputs and 32 outputs........well.........it's not like if I
>>> don't have that many, I will die, but it would make a couple of things
>>> here a bit simpler.
>>>
>>> ;o)
>>>
>>> "Graham Duncan" <graham@grahamduncan.com> wrote in message
>>> news:4765fa3a$1@linux...
>>>
>>>> Why not trade a Multiface for a Digiface?
>>>>
>>>> Graham
>>>>
>>>> DJ wrote:
>>>>
>>>>> I need some more I/O. If I could add another Multiface (total of 4 x
>>>>> HDSP PCI interfaces on my master DAW), my life would be perfect and I'd
>>>>> never need to buy another piece of gear ever again.
>>>>>
>>>>>
>

--
Chris Ludwig

ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93718 is a reply to message #93711]

Mon, 17 December 2007 09:10

EK Sound

Messages: 939
Registered: June 2005

Senior Member

There is no way you should need 154 I/O for anything... you need to do
some serious streamlining I think!

David.

DJ wrote:
> You got a DM2000 with 154 digital inputs and 154 digital outputs laying
> around that you want to sell cheap? That would work for me.
>
> ;o)
>
>
> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
> news:476615ac@linux...
>
>>You need a console.... ;-)
>>
>>David.
>>
>>DJ wrote:
>>
>>
>>>I need 24 inputs and 32 outputs........well.........it's not like if I
>>>don't have that many, I will die, but it would make a couple of things
>>>here a bit simpler.
>>>
>>>;o)
>>>
>>>"Graham Duncan" <graham@grahamduncan.com> wrote in message
>>>news:4765fa3a$1@linux...
>>>
>>>
>>>>Why not trade a Multiface for a Digiface?
>>>>
>>>>Graham
>>>>
>>>>DJ wrote:
>>>>
>>>>
>>>>>I need some more I/O. If I could add another Multiface (total of 4 x
>>>>>HDSP PCI interfaces on my master DAW), my life would be perfect and I'd
>>>>>never need to buy another piece of gear ever again.
>>>>>
>>>>>
>>>
>

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93722 is a reply to message #93718]

Mon, 17 December 2007 15:07

John [1]
Messages: 2229
Registered: September 2005

Senior Member

The brain of DJ doesn't have the word streamline anywhere. I've seen inside.........this
is just his hair !

http://tinyurl.com/yo9poq

EK Sound <ask_me@nospam.net> wrote:
>There is no way you should need 154 I/O for anything... you need to do
>some serious streamlining I think!
>
>David.
>
>DJ wrote:
>> You got a DM2000 with 154 digital inputs and 154 digital outputs laying

>> around that you want to sell cheap? That would work for me.
>>
>> ;o)
>>
>>
>> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
>> news:476615ac@linux...
>>
>>>You need a console.... ;-)
>>>
>>>David.
>>>
>>>DJ wrote:
>>>
>>>
>>>>I need 24 inputs and 32 outputs........well.........it's not like if
I
>>>>don't have that many, I will die, but it would make a couple of things

>>>>here a bit simpler.
>>>>
>>>>;o)
>>>>
>>>>"Graham Duncan" <graham@grahamduncan.com> wrote in message
>>>>news:4765fa3a$1@linux...
>>>>
>>>>
>>>>>Why not trade a Multiface for a Digiface?
>>>>>
>>>>>Graham
>>>>>
>>>>>DJ wrote:
>>>>>
>>>>>
>>>>>>I need some more I/O. If I could add another Multiface (total of 4
x
>>>>>>HDSP PCI interfaces on my master DAW), my life would be perfect and
I'd
>>>>>>never need to buy another piece of gear ever again.
>>>>>>
>>>>>>
>>>>
>>

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #93724 is a reply to message #93722]

Mon, 17 December 2007 20:10

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

Looks kinda like load out at the end of the night with my band.
yuk.

AA

"John" <no@no.com> wrote in message news:4766f308$1@linux...
>
> The brain of DJ doesn't have the word streamline anywhere. I've seen
> inside.........this
> is just his hair !
>
> http://tinyurl.com/yo9poq
>
>
> EK Sound <ask_me@nospam.net> wrote:
>>There is no way you should need 154 I/O for anything... you need to do
>>some serious streamlining I think!
>>
>>David.

Report message to a moderator

Re: Does the RME HDSP driver support 4 x cards? [message #94014 is a reply to message #93718]

Tue, 25 December 2007 11:26

Deej

Messages: 130
Registered: September 2006

Senior Member

This tells the tale and totally validates my mental illness.....plus, it's
actually working, quite nicely, thank you...
;o)

http://forum.dawbench.com/showthread.php?t=1052

"EK Sound" <ask_me@nospam.net> wrote in message news:4766ae96@linux...
> There is no way you should need 154 I/O for anything... you need to do
> some serious streamlining I think!
>
> David.
>
> DJ wrote:
>> You got a DM2000 with 154 digital inputs and 154 digital outputs laying
>> around that you want to sell cheap? That would work for me.
>>
>> ;o)
>>
>>
>> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote in message
>> news:476615ac@linux...
>>
>>>You need a console.... ;-)
>>>
>>>David.
>>>
>>>DJ wrote:
>>>
>>>
>>>>I need 24 inputs and 32 outputs........well.........it's not like if I
>>>>don't have that many, I will die, but it would make a couple of things
>>>>here a bit simpler.
>>>>
>>>>;o)
>>>>
>>>>"Graham Duncan" <graham@grahamduncan.com> wrote in message
>>>>news:4765fa3a$1@linux...
>>>>
>>>>
>>>>>Why not trade a Multiface for a Digiface?
>>>>>
>>>>>Graham
>>>>>
>>>>>DJ wrote:
>>>>>
>>>>>
>>>>>>I need some more I/O. If I could add another Multiface (total of 4 x
>>>>>>HDSP PCI interfaces on my master DAW), my life would be perfect and
>>>>>>I'd never need to buy another piece of gear ever again.
>>>>>>
>>>>>>
>>>>
>>

Report message to a moderator

Previous Topic:	Korg Oasys-Karma Synth..Software..$169.00
Next Topic:	Merry Christmaslikething

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jan 12 02:14:34 PST 2025

Total time taken to generate the page: 0.01770 seconds