The PARIS Forums: PARIS: Main » Semi OT: UAD Card

Home » The PARIS Forums » PARIS: Main » Semi OT: UAD Card

Show: Today's Messages :: Polls :: Message Navigator

Semi OT: UAD Card [message #56384]

Fri, 29 July 2005 10:03

Brian Porick

Messages: 31
Registered: June 2005

Member

plug-ins that he can use both at
> >home and at work without having to purchase them twice. So our
newfangled
> >idea is to have him get a UAD Card and then literally transport the PCI
card
> >back and forth between work and home.
> >
> >Are any of you guys doing something like this, or have you tried
something
> >like this? How does that work as far as permissions go? Is the UAD its
own
> >dongle, or is there some other authorization process that needs to occur
> >every time one switches computers?
> >
> >Let me know your thoughts, and thanks in advance for any
information/ideas
> >you might have.
> >
> >Brian
> >
>The new key probably won't cost that much, (after all it's not a
Sony...)but disassembling a keyboard can be quite involved. If you're
accustomed to complicated dis and re-assembly it's not a big deal. Make
sure you have more time than you bargained for and mark everything as
you take it apart. Good luck!
Mike

Kim wrote:

>Was playing my ol' (well, 4

Report message to a moderator

Re: Semi OT: UAD Card [message #56387 is a reply to message #56384]

Fri, 29 July 2005 11:13

rick

Messages: 1976
Registered: February 2006

Senior Member

.net" target="_blank">animix_spam-this-ahole_@animas.net> wrote:
>This is because you need at least two more EDS cards and two more UAD-1's
>
>;o)
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>news:42e9c14d$1@linux...
>>
>> 13 slot Magma has ) problems with ACPI turned on in my system.
>> 6 eds and 2 UAD.
>> rod
>> DImitrios <musurgio@otenet.gr> wrote:
>> >I wonder now why my magma and my motherboard have some difficulties.
>> >What I have found is that my motherboard works with magma ONLY if magma
>>
>> >pci is put only in slots 4,5,6 of P4B-E
>> >If I put it on slots 1,2,3 no Magma or other cards sitting in Magma can
>>
>> >be recognized.
>> >Also I cannot have Paris working from inside Magma (four cards or less)
>>
>> >. There is some kind of distorted sound almost right away, totally
>> >unusable, but UAD1 and powercore works great that way.
>> >Do you think its Magma (the 7 pci slot expander) fault or motherboard's
>> ?
>> >I still use P4B-E because it is the on ly motherboard I know that can
>> >use my 1.5 GB Kingston PC133 SDRAM modules.
>> >Regards,
>> >Dimitrios
&g

Report message to a moderator

Re: Semi OT: UAD Card [message #56391 is a reply to message #56387]

Fri, 29 July 2005 12:24

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

/> the problem. I sort of doubt it though because the system was starting to
act erratic before I hooked up the Multiface to the SX DAW.

I've got project in the works here that has 12 songs with lots of tracks on
each. There's still lots more tracking/dubs to do on this project and I've
got a producer coming in tomorrow to discuss a label project. I'm going be
jacking around with reconfiguring my patchbay presets tonight to reflect the
new MEC/Card assignments. Right now every %$#^&*%^#$%'ing song on the
project I'm working on is playing back from the wrong &^$#^&^%&^&^%$ submix.

This stuff pisses me off to no end. This same thing started happening when I
was using 2 x MECs and a 442.

I thought I had a bad EDS card yesterday and I sent TheSoniq the money for
another one. Then the system started working normally again so I called him
and told him to hold off. I don't know if this is a card issue or not, but
I'm not gonna' get caught with my pants down so I'm going to tell him to
send it on.

Grrrrr...........

;o(I havn't done this for a while and I'm helping a friend (Louis who posted
here a couple weeks ago)install Paris on an XP system.
I think I remember how to dothe whole subsystem thing, but it would sure
be nice to know I'm steering him in the right direction. I can't seem to
locate the guide. Any help would be appreciated.
RodYeah...Freak Q on the mix buss is a trick I use all the time. Actually 2 Paris
comps and a freak Q. SWEET!!!
"Carl Amburn" <carlamburn@NOSPAMhotmail.com> wrote:
>Definitely worth having. I use the BarbEQ on my aux channels, and the FreakQ
>on my mix buss. It's hard to think you'd need a different eq for the mixer
>channels though....
>
>rock on,
>-Carl
>
>
>"dn" <daniel_burneNOSPAM@yahoo.com> wrote in message
>news:42ea2779$

Report message to a moderator

Re: Semi OT: UAD Card [message #56403 is a reply to message #56391]

Sat, 30 July 2005 02:11

rick

Messages: 1976
Registered: February 2006

Senior Member

> >
> > This stuff pisses me off to no end. This same thing started happening
when I
> > was using 2 x MECs and a 442.
> >
> > I thought I had a bad EDS card yesterday and I sent TheSoniq the money
for
> > another one. Then the system started working normally again so I called
him
> > and told him to hold off. I don't know if this is a card issue or not,
but
> > I'm not gonna' get caught with my pants down so I'm going to tell him to
> > send it on.
> >
> > Grrrrr...........
> >
> > ;o(
> >
> >sounds like a card to me. I had that digi pulse thing happen and it was a
card, but the card worked fine by itself...only got the hash when hooked
in a multi card system
rod
"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Looks like it's a bad card or bad ribbon cable(s). Just booted the system
>and now the same thing is happening. It's happening on Submix B now (which
>was switched to card C last night). I've done enough testing to be pretty
>sure it's not one of the HD SCSI cables or one of the MECs.
>
>When loading my default .ppj, I'm getting a digital pulse in the global
>fader. The only thing that stops this is switching the submix that is
>assigned to card C to virtual and then back to card. This stops the noise,
>but after doing this, no audio will play through the submix that card C
is
>assigned to.
>
>I guess I've got more testing to do. First I'm going to pull card B, replace
>it with card C and see if I have any problems with playback on either MEC
B
>or C.
>
>If it won't play on either MEC, then it's likely the card. If it plays on
>one MEC but not the other, then it's likely the MEC.
>
>If it plays on both MECs, I'm going to start switching ribbon cables between
>the cards and see if one of them is the culprit.
>
>If I still have no problems, I'll be stumped 'cause cards A & B work
>fine.......or so it seems right now.
>
>Maybe I'll get finished with this sometime today.
>
>;o(
>
>
>"Dave(EK Sound)" <audioguy_nospam_@shaw.ca> wrote in message
>news:42eb101e@linux...<

Report message to a moderator

Re: Semi OT: UAD Card [message #56846 is a reply to message #56384]

Fri, 12 August 2005 11:19

Miguel Vigil [1]

Messages: 258
Registered: July 2005

Senior Member

orld. Then I saw a couple of
> Peluso mics - CEM6 - that looked promising. I read on this NG that someone
> had bought some Peluso capsules, and I was curious as to how they are
> working for you..
>
> David LWe're praying for good news here--please
keep us posted.

What a great group this is :)

"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>We got back late last night. Nonstop testing in Scottsdale for two days.
Amy
>is doing a little better and wanted to come home so they loaded us up with
a
>bunch of test kits that we can do here coordinating with her local doctor
>starting Sunday and going for the next 6 days, then back to Scottsdale on
>the 21st for analysis of these tests, results of the tests she took while
we
>were there and even more testing on the 22'nd and 24th. Life has become
one
>big test it seems. I must say that the Mayo Clinic is like nothing I've
ever
>seen in my entire life.
>
>Now I'm off to start playing catchup. It's amazing how nuts things can get
>when you're running your own business and you have to leave it, even for
>just a couple of days.
>
>Thanks again everyone for the prayers,
>
>Deej
>
>
>
>"Nappy" <mgrant01@san.rr.com> wrote in message news:42fb7340$1@linux...
>&g

Report message to a moderator

Previous Topic:	OT:More on Word Clocks-Distribution Amps.
Next Topic:	Ribbon Mics

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 22 01:56:31 PST 2024

Total time taken to generate the page: 0.01624 seconds