The PARIS Forums: PARIS: Main » HELP... My Paris 3.0 says Error initializing...

Home » The PARIS Forums » PARIS: Main » HELP... My Paris 3.0 says Error initializing...

Show: Today's Messages :: Polls :: Message Navigator

HELP... My Paris 3.0 says Error initializing... [message #89874]

Sat, 15 September 2007 11:21

Trevor Andersen
Messages: 5
Registered: September 2007

Junior Member

Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got the hardware
installed again and now when I launch the app it just says "Error initializing
Paris engine... error 38/26"

I don't know what this message is...

I have three Paris EDS cards and they all say the same thing.
I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.

I am clueless here.

The same hardware works on my 98SE machine just fine.

Any ideas?

Thanks!

Report message to a moderator

Re: HELP... My Paris 3.0 says Error initializing... [message #89877 is a reply to message #89874]

Sat, 15 September 2007 11:36

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Do you have the challenge code from ID for that machine? It might need to
be authorized. Just a thought.

James

"Trevor Andersen" <off_key88@yahoo.com> wrote:
>
>Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got the
hardware
>installed again and now when I launch the app it just says "Error initializing
>Paris engine... error 38/26"
>
>I don't know what this message is...
>
>I have three Paris EDS cards and they all say the same thing.
>I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.
>
>I am clueless here.
>
>The same hardware works on my 98SE machine just fine.
>
>Any ideas?
>
>Thanks!

Report message to a moderator

Re: HELP... My Paris 3.0 says Error initializing... [message #89878 is a reply to message #89877]

Sat, 15 September 2007 11:58

Trevor Andersen
Messages: 5
Registered: September 2007

Junior Member

PARIS was authorized on this machine... but that was prior to changing versions
of XP. For some reason, this machine thought it had the wrong XP serial.
I changed it. Come to think of it... maybe the challenge code is based
on the original one.

Thanks for the suggestion. I think you are on to something. I will have
to see if I can get a new auth from ID.

That would certainly explain why it works on my other machine.

Why didn't I think of that? haha.

Trevor

"James McCloskey" <excelsm@hotmail.com> wrote:
>
>Do you have the challenge code from ID for that machine? It might need
to
>be authorized. Just a thought.
>
>James
>
>"Trevor Andersen" <off_key88@yahoo.com> wrote:
>>
>>Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got the
>hardware
>>installed again and now when I launch the app it just says "Error initializing
>>Paris engine... error 38/26"
>>
>>I don't know what this message is...
>>
>>I have three Paris EDS cards and they all say the same thing.
>>I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.
>>
>>I am clueless here.
>>
>>The same hardware works on my 98SE machine just fine.
>>
>>Any ideas?
>>
>>Thanks!
>

Report message to a moderator

Re: HELP... My Paris 3.0 says Error initializing... [message #89879 is a reply to message #89878]

Sat, 15 September 2007 12:08

Trevor Andersen
Messages: 5
Registered: September 2007

Junior Member

OK, now I think I am sunk...

I un-installed Paris and can't re-install from my 3.0 disk.

I get the error with the AUTOEXEC.NT

The system file is not suitable for running MS-DOS and Microsoft Windows
applications. Choose 'Close' to terminate the application.

Is Paris 3.0 compatible with XP pro?

Uggg... I don't think I will be able to use Paris on this machine anymore.
Boo hoo.

Bummer.

Trevor

"Trevor" <off_key88@yahoo.com> wrote:
>
>PARIS was authorized on this machine... but that was prior to changing versions
>of XP. For some reason, this machine thought it had the wrong XP serial.
> I changed it. Come to think of it... maybe the challenge code is based
>on the original one.
>
>Thanks for the suggestion. I think you are on to something. I will have
>to see if I can get a new auth from ID.
>
>That would certainly explain why it works on my other machine.
>
>Why didn't I think of that? haha.
>
>Trevor
>
>"James McCloskey" <excelsm@hotmail.com> wrote:
>>
>>Do you have the challenge code from ID for that machine? It might need
>to
>>be authorized. Just a thought.
>>
>>James
>>
>>"Trevor Andersen" <off_key88@yahoo.com> wrote:
>>>
>>>Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got the
>>hardware
>>>installed again and now when I launch the app it just says "Error initializing
>>>Paris engine... error 38/26"
>>>
>>>I don't know what this message is...
>>>
>>>I have three Paris EDS cards and they all say the same thing.
>>>I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.
>>>
>>>I am clueless here.
>>>
>>>The same hardware works on my 98SE machine just fine.
>>>
>>>Any ideas?
>>>
>>>Thanks!
>>
>

Report message to a moderator

Re: HELP... My Paris 3.0 says Error initializing... [message #89880 is a reply to message #89879]

Sat, 15 September 2007 12:34

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Go here and follow the install instructions for XP carefully.

http://www.parisfaqs.com/
http://webnews.parisnewsgroup.com/

"Trevor" <off_key88@yahoo.com> wrote:
>
>OK, now I think I am sunk...
>
>I un-installed Paris and can't re-install from my 3.0 disk.
>
>I get the error with the AUTOEXEC.NT
>
>The system file is not suitable for running MS-DOS and Microsoft Windows
>applications. Choose 'Close' to terminate the application.
>
>Is Paris 3.0 compatible with XP pro?
>
>Uggg... I don't think I will be able to use Paris on this machine anymore.
> Boo hoo.
>
>Bummer.
>
>Trevor
>
>"Trevor" <off_key88@yahoo.com> wrote:
>>
>>PARIS was authorized on this machine... but that was prior to changing
versions
>>of XP. For some reason, this machine thought it had the wrong XP serial.
>> I changed it. Come to think of it... maybe the challenge code is based
>>on the original one.
>>
>>Thanks for the suggestion. I think you are on to something. I will have
>>to see if I can get a new auth from ID.
>>
>>That would certainly explain why it works on my other machine.
>>
>>Why didn't I think of that? haha.
>>
>>Trevor
>>
>>"James McCloskey" <excelsm@hotmail.com> wrote:
>>>
>>>Do you have the challenge code from ID for that machine? It might need
>>to
>>>be authorized. Just a thought.
>>>
>>>James
>>>
>>>"Trevor Andersen" <off_key88@yahoo.com> wrote:
>>>>
>>>>Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got
the
>>>hardware
>>>>installed again and now when I launch the app it just says "Error initializing
>>>>Paris engine... error 38/26"
>>>>
>>>>I don't know what this message is...
>>>>
>>>>I have three Paris EDS cards and they all say the same thing.
>>>>I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.
>>>>
>>>>I am clueless here.
>>>>
>>>>The same hardware works on my 98SE machine just fine.
>>>>
>>>>Any ideas?
>>>>
>>>>Thanks!
>>>
>>
>

Report message to a moderator

Re: HELP... My Paris 3.0 says Error initializing... [message #89881 is a reply to message #89880]

Sat, 15 September 2007 12:39

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Here is the direct link.

http://homepage.mac.com/osxlover/ParisFAQs/parisonxp.html

"James McCloskey" <excelsm@hotmail.com> wrote:
>
>Go here and follow the install instructions for XP carefully.
>
>http://www.parisfaqs.com/
>http://webnews.parisnewsgroup.com/
>
>"Trevor" <off_key88@yahoo.com> wrote:
>>
>>OK, now I think I am sunk...
>>
>>I un-installed Paris and can't re-install from my 3.0 disk.
>>
>>I get the error with the AUTOEXEC.NT
>>
>>The system file is not suitable for running MS-DOS and Microsoft Windows
>>applications. Choose 'Close' to terminate the application.
>>
>>Is Paris 3.0 compatible with XP pro?
>>
>>Uggg... I don't think I will be able to use Paris on this machine anymore.
>> Boo hoo.
>>
>>Bummer.
>>
>>Trevor
>>
>>"Trevor" <off_key88@yahoo.com> wrote:
>>>
>>>PARIS was authorized on this machine... but that was prior to changing
>versions
>>>of XP. For some reason, this machine thought it had the wrong XP serial.
>>> I changed it. Come to think of it... maybe the challenge code is based
>>>on the original one.
>>>
>>>Thanks for the suggestion. I think you are on to something. I will have
>>>to see if I can get a new auth from ID.
>>>
>>>That would certainly explain why it works on my other machine.
>>>
>>>Why didn't I think of that? haha.
>>>
>>>Trevor
>>>
>>>"James McCloskey" <excelsm@hotmail.com> wrote:
>>>>
>>>>Do you have the challenge code from ID for that machine? It might need
>>>to
>>>>be authorized. Just a thought.
>>>>
>>>>James
>>>>
>>>>"Trevor Andersen" <off_key88@yahoo.com> wrote:
>>>>>
>>>>>Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got
>the
>>>>hardware
>>>>>installed again and now when I launch the app it just says "Error initializing
>>>>>Paris engine... error 38/26"
>>>>>
>>>>>I don't know what this message is...
>>>>>
>>>>>I have three Paris EDS cards and they all say the same thing.
>>>>>I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.
>>>>>
>>>>>I am clueless here.
>>>>>
>>>>>The same hardware works on my 98SE machine just fine.
>>>>>
>>>>>Any ideas?
>>>>>
>>>>>Thanks!
>>>>
>>>
>>
>

Report message to a moderator

Re: HELP... My Paris 3.0 says Error initializing... [message #89882 is a reply to message #89881]

Sat, 15 September 2007 12:49

Trevor Andersen
Messages: 5
Registered: September 2007

Junior Member

Yes, I have read this document many times. Unfortunately, the step that says
"6. Install the PARIS application" doesn't mention anything about an error
even running the installer file.

The only thing I can find on Microsoft's site about the error is from Windows2000.

I think my version of XP has some sort of security update or something that
is preventing the paris installer application from running.

I think it's Windows... grr.

If it was a clean install it might work. I am just not willing to start
over on this machine. It would take too much time. The best thing for me
to do I think is just copy all the paris projects off this machine and put
them on CD's or something for my 98SE machine that is running Paris just
fine. It would have been nice to have Paris on this machine but I only wanted
it on here to listen to some of my old projects that are lurking on it.

Oh well...

Thanks for the advice. I appreciate all the suggestions.

Trevor

"James McCloskey" <excelsm@hotmail.com> wrote:
>
>Here is the direct link.
>
>http://homepage.mac.com/osxlover/ParisFAQs/parisonxp.html
>
>
>"James McCloskey" <excelsm@hotmail.com> wrote:
>>
>>Go here and follow the install instructions for XP carefully.
>>
>>http://www.parisfaqs.com/
>>http://webnews.parisnewsgroup.com/
>>
>>"Trevor" <off_key88@yahoo.com> wrote:
>>>
>>>OK, now I think I am sunk...
>>>
>>>I un-installed Paris and can't re-install from my 3.0 disk.
>>>
>>>I get the error with the AUTOEXEC.NT
>>>
>>>The system file is not suitable for running MS-DOS and Microsoft Windows
>>>applications. Choose 'Close' to terminate the application.
>>>
>>>Is Paris 3.0 compatible with XP pro?
>>>
>>>Uggg... I don't think I will be able to use Paris on this machine anymore.
>>> Boo hoo.
>>>
>>>Bummer.
>>>
>>>Trevor
>>>
>>>"Trevor" <off_key88@yahoo.com> wrote:
>>>>
>>>>PARIS was authorized on this machine... but that was prior to changing
>>versions
>>>>of XP. For some reason, this machine thought it had the wrong XP serial.
>>>> I changed it. Come to think of it... maybe the challenge code is based
>>>>on the original one.
>>>>
>>>>Thanks for the suggestion. I think you are on to something. I will
have
>>>>to see if I can get a new auth from ID.
>>>>
>>>>That would certainly explain why it works on my other machine.
>>>>
>>>>Why didn't I think of that? haha.
>>>>
>>>>Trevor
>>>>
>>>>"James McCloskey" <excelsm@hotmail.com> wrote:
>>>>>
>>>>>Do you have the challenge code from ID for that machine? It might need
>>>>to
>>>>>be authorized. Just a thought.
>>>>>
>>>>>James
>>>>>
>>>>>"Trevor Andersen" <off_key88@yahoo.com> wrote:
>>>>>>
>>>>>>Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got
>>the
>>>>>hardware
>>>>>>installed again and now when I launch the app it just says "Error initializing
>>>>>>Paris engine... error 38/26"
>>>>>>
>>>>>>I don't know what this message is...
>>>>>>
>>>>>>I have three Paris EDS cards and they all say the same thing.
>>>>>>I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.
>>>>>>
>>>>>>I am clueless here.
>>>>>>
>>>>>>The same hardware works on my 98SE machine just fine.
>>>>>>
>>>>>>Any ideas?
>>>>>>
>>>>>>Thanks!
>>>>>
>>>>
>>>
>>
>

Report message to a moderator

Re: HELP... My Paris 3.0 says Error initializing... [message #89887 is a reply to message #89882]

Sat, 15 September 2007 15:32

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

Make sure this is turned OFF. (DEP)

http://support.microsoft.com/kb/875352

AA

"Trevor" <off_key88@yahoo.com> wrote in message news:46ec372c$1@linux...
>
> Yes, I have read this document many times. Unfortunately, the step that
> says
> "6. Install the PARIS application" doesn't mention anything about an error
> even running the installer file.
>
> The only thing I can find on Microsoft's site about the error is from
> Windows2000.
>
> I think my version of XP has some sort of security update or something
> that
> is preventing the paris installer application from running.
>
> I think it's Windows... grr.
>
> If it was a clean install it might work. I am just not willing to start
> over on this machine. It would take too much time. The best thing for me
> to do I think is just copy all the paris projects off this machine and put
> them on CD's or something for my 98SE machine that is running Paris just
> fine. It would have been nice to have Paris on this machine but I only
> wanted
> it on here to listen to some of my old projects that are lurking on it.
>
> Oh well...
>
> Thanks for the advice. I appreciate all the suggestions.
>
>
> Trevor
>
> "James McCloskey" <excelsm@hotmail.com> wrote:
>>
>>Here is the direct link.
>>
>>http://homepage.mac.com/osxlover/ParisFAQs/parisonxp.html
>>
>>
>>"James McCloskey" <excelsm@hotmail.com> wrote:
>>>
>>>Go here and follow the install instructions for XP carefully.
>>>
>>>http://www.parisfaqs.com/
>>>http://webnews.parisnewsgroup.com/
>>>
>>>"Trevor" <off_key88@yahoo.com> wrote:
>>>>
>>>>OK, now I think I am sunk...
>>>>
>>>>I un-installed Paris and can't re-install from my 3.0 disk.
>>>>
>>>>I get the error with the AUTOEXEC.NT
>>>>
>>>>The system file is not suitable for running MS-DOS and Microsoft Windows
>>>>applications. Choose 'Close' to terminate the application.
>>>>
>>>>Is Paris 3.0 compatible with XP pro?
>>>>
>>>>Uggg... I don't think I will be able to use Paris on this machine
>>>>anymore.
>>>> Boo hoo.
>>>>
>>>>Bummer.
>>>>
>>>>Trevor
>>>>
>>>>"Trevor" <off_key88@yahoo.com> wrote:
>>>>>
>>>>>PARIS was authorized on this machine... but that was prior to changing
>>>versions
>>>>>of XP. For some reason, this machine thought it had the wrong XP
>>>>>serial.
>>>>> I changed it. Come to think of it... maybe the challenge code is
>>>>> based
>>>>>on the original one.
>>>>>
>>>>>Thanks for the suggestion. I think you are on to something. I will
> have
>>>>>to see if I can get a new auth from ID.
>>>>>
>>>>>That would certainly explain why it works on my other machine.
>>>>>
>>>>>Why didn't I think of that? haha.
>>>>>
>>>>>Trevor
>>>>>
>>>>>"James McCloskey" <excelsm@hotmail.com> wrote:
>>>>>>
>>>>>>Do you have the challenge code from ID for that machine? It might
>>>>>>need
>>>>>to
>>>>>>be authorized. Just a thought.
>>>>>>
>>>>>>James
>>>>>>
>>>>>>"Trevor Andersen" <off_key88@yahoo.com> wrote:
>>>>>>>
>>>>>>>Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got
>>>the
>>>>>>hardware
>>>>>>>installed again and now when I launch the app it just says "Error
>>>>>>>initializing
>>>>>>>Paris engine... error 38/26"
>>>>>>>
>>>>>>>I don't know what this message is...
>>>>>>>
>>>>>>>I have three Paris EDS cards and they all say the same thing.
>>>>>>>I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.
>>>>>>>
>>>>>>>I am clueless here.
>>>>>>>
>>>>>>>The same hardware works on my 98SE machine just fine.
>>>>>>>
>>>>>>>Any ideas?
>>>>>>>
>>>>>>>Thanks!
>>>>>>
>>>>>
>>>>
>>>
>>
>

Report message to a moderator

Re: HELP... My Paris 3.0 says Error initializing (update) [message #90060 is a reply to message #89879]

Thu, 20 September 2007 20:38

Trevor Andersen
Messages: 5
Registered: September 2007

Junior Member

Just as a side note... I got this working finally.

It looks like the Autoexec.nt just didn't exist in my System32 folder for
some reason. Copied it from the repair directory and was able to re-instal
PARIS!!!

Everything works as normal now.

Yipee!!!

"Trevor" <off_key88@yahoo.com> wrote:
>
>OK, now I think I am sunk...
>
>I un-installed Paris and can't re-install from my 3.0 disk.
>
>I get the error with the AUTOEXEC.NT
>
>The system file is not suitable for running MS-DOS and Microsoft Windows
>applications. Choose 'Close' to terminate the application.
>
>Is Paris 3.0 compatible with XP pro?
>
>Uggg... I don't think I will be able to use Paris on this machine anymore.
> Boo hoo.
>
>Bummer.
>
>Trevor
>
>"Trevor" <off_key88@yahoo.com> wrote:
>>
>>PARIS was authorized on this machine... but that was prior to changing
versions
>>of XP. For some reason, this machine thought it had the wrong XP serial.
>> I changed it. Come to think of it... maybe the challenge code is based
>>on the original one.
>>
>>Thanks for the suggestion. I think you are on to something. I will have
>>to see if I can get a new auth from ID.
>>
>>That would certainly explain why it works on my other machine.
>>
>>Why didn't I think of that? haha.
>>
>>Trevor
>>
>>"James McCloskey" <excelsm@hotmail.com> wrote:
>>>
>>>Do you have the challenge code from ID for that machine? It might need
>>to
>>>be authorized. Just a thought.
>>>
>>>James
>>>
>>>"Trevor Andersen" <off_key88@yahoo.com> wrote:
>>>>
>>>>Ok, so I decided to fire up Paris 3.0 on my older XP machine. I got
the
>>>hardware
>>>>installed again and now when I launch the app it just says "Error initializing
>>>>Paris engine... error 38/26"
>>>>
>>>>I don't know what this message is...
>>>>
>>>>I have three Paris EDS cards and they all say the same thing.
>>>>I have a MEC Pro, 2 442s and 2 IF2s they all say the same thing.
>>>>
>>>>I am clueless here.
>>>>
>>>>The same hardware works on my 98SE machine just fine.
>>>>
>>>>Any ideas?
>>>>
>>>>Thanks!
>>>
>>
>

Report message to a moderator

Previous Topic:	AES Passes
Next Topic:	Fluid chorus

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Apr 16 09:23:48 PDT 2025

Total time taken to generate the page: 0.08968 seconds