The PARIS Forums: PARIS: Main » Virtua Via PCIe to PCI chassis available (again?)

Home » The PARIS Forums » PARIS: Main » Virtua Via PCIe to PCI chassis available (again?)

Show: Today's Messages :: Polls :: Message Navigator

Virtua Via PCIe to PCI chassis available (again?) [message #108195]

Fri, 09 May 2014 04:30

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

I got an email from Gildas JALABERT, Sales Manager at Virtua Via yesterday telling me that the expansion chassis is still available.

I have no idea why they didn't respond to my phone calls and emails before, but I got two replies yesterday (one from an email I sent, and one from a contact through their web form).

Here is Gildas contact information:

Gildas JALABERT

Sales Manager
mailto:sales@virtuavia.com
mailto:sales@rayled.com
Phone: + 33 4 58 00 15 74
Fax: + 33 9 55 70 03 53

I've been using their expansion kit for a long time now, and it's been perfect.

It can be ordered with a ExpressCard host connection, too, which should work to bridge it with a ExpressCard Thunderbolt adapter.

PARIS Lives!

Mike

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #108196 is a reply to message #108195]

Fri, 09 May 2014 06:44

dnafe

Messages: 390
Registered: February 2009

Senior Member

thanks for the heads up

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #108199 is a reply to message #108196]

Sat, 10 May 2014 07:33

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

I ordered the ExpressCard for the chassis yesterday. I'll let you guys know how the purchase goes.

All the best,

Mike

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #108213 is a reply to message #108199]

Sun, 18 May 2014 18:48

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Correction:
As Mike says below, the PCI expansion chassis with the wall wart will not work. You would need to get the current Virtua Via chassis.

James

[Updated on: Mon, 19 May 2014 07:13]

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #108214 is a reply to message #108213]

Mon, 19 May 2014 05:19

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi James,

Those expansion chassis use a wall wart to power the PCI cards. The EDS cards draw about 20 watts from the 5 volt lead each, which is too much for a wall wart. You might get one card to work in these, but definitely not two.

The Virtua Via chassis is so unique because it uses an ATX power supply, just like the Magma options, but for a fraction of the price.

All the best!

Mike

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #108215 is a reply to message #108214]

Mon, 19 May 2014 07:05

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Hey Mike thanks for the info.

James

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #108270 is a reply to message #108215]

Thu, 05 June 2014 06:34

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

I got the Express Card connection from Virtua Via a few days ago.

I haven't had a chance to try it yet, but I'll post when I do.

All the best,

Mike

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #108279 is a reply to message #108270]

Sat, 14 June 2014 12:24

Studio111

Messages: 21
Registered: October 2010
Location: Silicon Valley

Junior Member

Mike,

Please give us an update...have you had a chance to try everything?

How's it working?

thanks!

Don

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #108280 is a reply to message #108279]

Wed, 18 June 2014 16:33

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi Don,

I haven't had a chance to try the ExpressCard adapter yet. It turns out my laptop is so old that it has a cardbus slot. I need to find a time when I am free and I can borrow my wife's laptop.

I'm very confident that it will work just fine.

All the best,

Mike

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #109741 is a reply to message #108280]

Fri, 29 November 2019 11:36

Rich.Kelley

Messages: 98
Registered: August 2009

Member

I couldn't find any VirtuaVia Chassis available, new or used. I did find several MAGMA PE6R4-1 both new and used (new ones are crazy expensive). Any issues with those, or is there a source for the VirtuaVia's that I'm missing?

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #109742 is a reply to message #109741]

Fri, 29 November 2019 22:44

Rich.Kelley

Messages: 98
Registered: August 2009

Member

I pulled the trigger on a Magma PE6R4-1. Hope this wasn't a mistake, but if so tell me. It's a fixable mistake.

My overall goal is a stable system that will run 4 cards. No midi or anything else is necessary. I can get other computers to do that.

Assuming the Magma will work, next up is a modern computer and operating system to go with the Magma. I can build a computer if necessary. What's the thought on either a current Mobo and parts, or (preferably) whole system.

Also, operating system. Should I just go with Windows 10, or should I buy a copy of Windows 7 and install fresh? This computer only has to run Paris and any programs necessary to get from Paris files to .wav. It never has to be connected to the internet or do other tasks.

Finally, I'm still using WaveLab lite to go from Paris to .wav. Will that still work, or is there a better option? If so, what?

Sorry for all of the questions.

Report message to a moderator

Re: Virtua Via PCIe to PCI chassis available (again?) [message #109743 is a reply to message #109742]

Fri, 29 November 2019 22:48

Rich.Kelley

Messages: 98
Registered: August 2009

Member

If you're interested in something that I've recorded on my current Paris rig:

https://www.youtube.com/watch?v=6z1OIWQ5oZ8

https://www.youtube.com/watch?v=qAdVeQ7vhFA

Thanks again for any help.

Rich

Report message to a moderator

Previous Topic:	PARIS Compressor as soft clipper
Next Topic:	the system has halted NMI Parity Check Memory Parity Error

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Dec 27 02:08:36 PST 2024

Total time taken to generate the page: 0.01311 seconds