The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Any of you guys overclockers or understand voltage-CPU cycles?
Any of you guys overclockers or understand voltage-CPU cycles? [message #74588] Sat, 21 October 2006 13:35 Go to next message
animix is currently offline  animix   UNITED STATES
Messages: 356
Registered: September 2006
Senior Member
I'm no overclocker (or any kind of clocker I guess). I'm testing a mobo,
getting ready to load Windows on this beast and when the system posts, the
AMD 4200 dual core is showing up at 200mhz. If I boot to the bios there are
clock settings but I'm an idiot and don't know what to set to get tis thing
happening at 2100MHZ........and since I blow stuff up sometimes, I want to
at least get some advice before I fry the CPU. I'll be testing a 3 card
Paris system on this rig to see how/if it can work with dual core CPU's and
multiple C-16's so so if anyone wants to pitch in, please give me a ring

970-375-7081

Thanks,

Deej
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74595 is a reply to message #74588] Sat, 21 October 2006 15:58 Go to previous messageGo to next message
Chris Ludwig is currently offline  Chris Ludwig   UNITED STATES
Messages: 868
Registered: May 2006
Senior Member
HI DJ,
Which motherboard was it again?

Chris


DJ wrote:

>I'm no overclocker (or any kind of clocker I guess). I'm testing a mobo,
>getting ready to load Windows on this beast and when the system posts, the
>AMD 4200 dual core is showing up at 200mhz. If I boot to the bios there are
>clock settings but I'm an idiot and don't know what to set to get tis thing
>happening at 2100MHZ........and since I blow stuff up sometimes, I want to
>at least get some advice before I fry the CPU. I'll be testing a 3 card
>Paris system on this rig to see how/if it can work with dual core CPU's and
>multiple C-16's so so if anyone wants to pitch in, please give me a ring
>
>970-375-7081
>
>Thanks,
>
>Deej
>
>
>
>
>
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74597 is a reply to message #74595] Sat, 21 October 2006 16:13 Go to previous messageGo to next message
Chris Ludwig is currently offline  Chris Ludwig   UNITED STATES
Messages: 868
Registered: May 2006
Senior Member
Never mind i saw it in the other post.
Before you start toying with over clocking make sure you did these
things. They will increase the odds for stability with the Paris and
over clocking.

1. Make sure you have the most current BIOS.
2. Use the the newest Nividia motherboard chipset driver s from Nvidias
website.
3. Install AMD dual core optimizer driver from AMDs website.
Install MIcrosoft CPU Hotfix driver.
4. Install current Nividia video driver
5. Install all the latest xp updates. Use the custom option. "Install
the framework 2.0 last"
6. Do XP tweaks


Install the Paris stuff and see if it works before you start fooling
around. I would also suggest doing a system image before you start over
clocking, especially if you get paris working OK. Over clocking to far
will some time hose your xp install.

Chris




Chris Ludwig wrote:

> HI DJ,
> Which motherboard was it again?
>
> Chris
>
>
> DJ wrote:
>
>> I'm no overclocker (or any kind of clocker I guess). I'm testing a mobo,
>> getting ready to load Windows on this beast and when the system
>> posts, the
>> AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
>> there are
>> clock settings but I'm an idiot and don't know what to set to get tis
>> thing
>> happening at 2100MHZ........and since I blow stuff up sometimes, I
>> want to
>> at least get some advice before I fry the CPU. I'll be testing a 3 card
>> Paris system on this rig to see how/if it can work with dual core
>> CPU's and
>> multiple C-16's so so if anyone wants to pitch in, please give me a ring
>>
>> 970-375-7081
>>
>> Thanks,
>>
>> Deej
>>
>>
>>
>>
>>
>>
>>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74599 is a reply to message #74597] Sat, 21 October 2006 17:32 Go to previous messageGo to next message
animix is currently offline  animix   UNITED STATES
Messages: 356
Registered: September 2006
Senior Member
Chris,

I just want to get it clocked above 200MHZ right now. that's it's default
and it has the most recent bios already. what would the voltage settings be
to get this puppy to 2100 mHZ?

Thanks,

Deej

"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:453aa792$1@linux...
> Never mind i saw it in the other post.
> Before you start toying with over clocking make sure you did these
> things. They will increase the odds for stability with the Paris and
> over clocking.
>
> 1. Make sure you have the most current BIOS.
> 2. Use the the newest Nividia motherboard chipset driver s from Nvidias
> website.
> 3. Install AMD dual core optimizer driver from AMDs website.
> Install MIcrosoft CPU Hotfix driver.
> 4. Install current Nividia video driver
> 5. Install all the latest xp updates. Use the custom option. "Install
> the framework 2.0 last"
> 6. Do XP tweaks
>
>
> Install the Paris stuff and see if it works before you start fooling
> around. I would also suggest doing a system image before you start over
> clocking, especially if you get paris working OK. Over clocking to far
> will some time hose your xp install.
>
> Chris
>
>
>
>
> Chris Ludwig wrote:
>
> > HI DJ,
> > Which motherboard was it again?
> >
> > Chris
> >
> >
> > DJ wrote:
> >
> >> I'm no overclocker (or any kind of clocker I guess). I'm testing a
mobo,
> >> getting ready to load Windows on this beast and when the system
> >> posts, the
> >> AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
> >> there are
> >> clock settings but I'm an idiot and don't know what to set to get tis
> >> thing
> >> happening at 2100MHZ........and since I blow stuff up sometimes, I
> >> want to
> >> at least get some advice before I fry the CPU. I'll be testing a 3 card
> >> Paris system on this rig to see how/if it can work with dual core
> >> CPU's and
> >> multiple C-16's so so if anyone wants to pitch in, please give me a
ring
> >>
> >> 970-375-7081
> >>
> >> Thanks,
> >>
> >> Deej
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74614 is a reply to message #74599] Sun, 22 October 2006 07:31 Go to previous messageGo to next message
IOUOI is currently offline  IOUOI
Messages: 38
Registered: June 2007
Member
Deej, 200 MHz is the core cycle setting ONLY... it's an
internal setting on the CPU, not the CPU speed itself - you can
look at it as kinda like a baseline reference point. It doesn't
mean the normal operating speed of the CPU. Your processor will
run at it's stated speed with this setting.

It's when you get into the settings higher than that that you
start overclocking. Chris is right, get the thing booted up &
stable before you start tweaking with overperformance. Boot it
up & load a heavy project with the settings just as they are...
you'll see, it'll be fine - if the processor itself were only
running @ 200mhz, you'd never be able to load more than a few
tracks & a few plugins.

Neil






"DJ" <notachance@net.net> wrote:
>Chris,
>
>I just want to get it clocked above 200MHZ right now. that's it's default
>and it has the most recent bios already. what would the voltage settings
be
>to get this puppy to 2100 mHZ?
>
>Thanks,
>
>Deej
>
>"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
>news:453aa792$1@linux...
>> Never mind i saw it in the other post.
>> Before you start toying with over clocking make sure you did these
>> things. They will increase the odds for stability with the Paris and
>> over clocking.
>>
>> 1. Make sure you have the most current BIOS.
>> 2. Use the the newest Nividia motherboard chipset driver s from Nvidias
>> website.
>> 3. Install AMD dual core optimizer driver from AMDs website.
>> Install MIcrosoft CPU Hotfix driver.
>> 4. Install current Nividia video driver
>> 5. Install all the latest xp updates. Use the custom option. "Install
>> the framework 2.0 last"
>> 6. Do XP tweaks
>>
>>
>> Install the Paris stuff and see if it works before you start fooling
>> around. I would also suggest doing a system image before you start over
>> clocking, especially if you get paris working OK. Over clocking to far
>> will some time hose your xp install.
>>
>> Chris
>>
>>
>>
>>
>> Chris Ludwig wrote:
>>
>> > HI DJ,
>> > Which motherboard was it again?
>> >
>> > Chris
>> >
>> >
>> > DJ wrote:
>> >
>> >> I'm no overclocker (or any kind of clocker I guess). I'm testing a
>mobo,
>> >> getting ready to load Windows on this beast and when the system
>> >> posts, the
>> >> AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
>> >> there are
>> >> clock settings but I'm an idiot and don't know what to set to get tis
>> >> thing
>> >> happening at 2100MHZ........and since I blow stuff up sometimes, I
>> >> want to
>> >> at least get some advice before I fry the CPU. I'll be testing a 3
card
>> >> Paris system on this rig to see how/if it can work with dual core
>> >> CPU's and
>> >> multiple C-16's so so if anyone wants to pitch in, please give me a
>ring
>> >>
>> >> 970-375-7081
>> >>
>> >> Thanks,
>> >>
>> >> Deej
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>>
>> --
>> Chris Ludwig
>> ADK
>> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>> www.adkproaudio.com <http://www.adkproaudio.com/>
>> (859) 635-5762
>
>
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74616 is a reply to message #74599] Sun, 22 October 2006 08:15 Go to previous messageGo to next message
Chris Ludwig is currently offline  Chris Ludwig   UNITED STATES
Messages: 868
Registered: May 2006
Senior Member
HI DJ,
200mhz is the proper FSB multiplier settings. If it is above that then
you are over clocking.

The MB Intelligent Tweaker section of the BIOS should running defaults.
CPU Clock Ratio = Auto
CPU Over clock in MHz = 200
AGP Over clock in MHz = 66
All the voltage controls = normal

This will be the default non -over clocked settings.


Chris


DJ wrote:

>Chris,
>
>I just want to get it clocked above 200MHZ right now. that's it's default
>and it has the most recent bios already. what would the voltage settings be
>to get this puppy to 2100 mHZ?
>
>Thanks,
>
>Deej
>
>"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
>news:453aa792$1@linux...
>
>
>>Never mind i saw it in the other post.
>>Before you start toying with over clocking make sure you did these
>>things. They will increase the odds for stability with the Paris and
>>over clocking.
>>
>>1. Make sure you have the most current BIOS.
>>2. Use the the newest Nividia motherboard chipset driver s from Nvidias
>>website.
>>3. Install AMD dual core optimizer driver from AMDs website.
>>Install MIcrosoft CPU Hotfix driver.
>>4. Install current Nividia video driver
>>5. Install all the latest xp updates. Use the custom option. "Install
>>the framework 2.0 last"
>>6. Do XP tweaks
>>
>>
>>Install the Paris stuff and see if it works before you start fooling
>>around. I would also suggest doing a system image before you start over
>>clocking, especially if you get paris working OK. Over clocking to far
>>will some time hose your xp install.
>>
>>Chris
>>
>>
>>
>>
>>Chris Ludwig wrote:
>>
>>
>>
>>>HI DJ,
>>>Which motherboard was it again?
>>>
>>>Chris
>>>
>>>
>>>DJ wrote:
>>>
>>>
>>>
>>>>I'm no overclocker (or any kind of clocker I guess). I'm testing a
>>>>
>>>>
>mobo,
>
>
>>>>getting ready to load Windows on this beast and when the system
>>>>posts, the
>>>>AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
>>>>there are
>>>>clock settings but I'm an idiot and don't know what to set to get tis
>>>>thing
>>>>happening at 2100MHZ........and since I blow stuff up sometimes, I
>>>>want to
>>>>at least get some advice before I fry the CPU. I'll be testing a 3 card
>>>>Paris system on this rig to see how/if it can work with dual core
>>>>CPU's and
>>>>multiple C-16's so so if anyone wants to pitch in, please give me a
>>>>
>>>>
>ring
>
>
>>>>970-375-7081
>>>>
>>>>Thanks,
>>>>
>>>>Deej
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>--
>>Chris Ludwig
>>ADK
>>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>>www.adkproaudio.com <http://www.adkproaudio.com/>
>>(859) 635-5762
>>
>>
>
>
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74626 is a reply to message #74616] Sun, 22 October 2006 11:13 Go to previous message
animix is currently offline  animix   UNITED STATES
Messages: 356
Registered: September 2006
Senior Member
OK then guys. Thanks for the help.

;o)

"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:453b8917$1@linux...
> HI DJ,
> 200mhz is the proper FSB multiplier settings. If it is above that then
> you are over clocking.
>
> The MB Intelligent Tweaker section of the BIOS should running defaults.
> CPU Clock Ratio = Auto
> CPU Over clock in MHz = 200
> AGP Over clock in MHz = 66
> All the voltage controls = normal
>
> This will be the default non -over clocked settings.
>
>
> Chris
>
>
> DJ wrote:
>
> >Chris,
> >
> >I just want to get it clocked above 200MHZ right now. that's it's default
> >and it has the most recent bios already. what would the voltage settings
be
> >to get this puppy to 2100 mHZ?
> >
> >Thanks,
> >
> >Deej
> >
> >"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
> >news:453aa792$1@linux...
> >
> >
> >>Never mind i saw it in the other post.
> >>Before you start toying with over clocking make sure you did these
> >>things. They will increase the odds for stability with the Paris and
> >>over clocking.
> >>
> >>1. Make sure you have the most current BIOS.
> >>2. Use the the newest Nividia motherboard chipset driver s from Nvidias
> >>website.
> >>3. Install AMD dual core optimizer driver from AMDs website.
> >>Install MIcrosoft CPU Hotfix driver.
> >>4. Install current Nividia video driver
> >>5. Install all the latest xp updates. Use the custom option. "Install
> >>the framework 2.0 last"
> >>6. Do XP tweaks
> >>
> >>
> >>Install the Paris stuff and see if it works before you start fooling
> >>around. I would also suggest doing a system image before you start over
> >>clocking, especially if you get paris working OK. Over clocking to far
> >>will some time hose your xp install.
> >>
> >>Chris
> >>
> >>
> >>
> >>
> >>Chris Ludwig wrote:
> >>
> >>
> >>
> >>>HI DJ,
> >>>Which motherboard was it again?
> >>>
> >>>Chris
> >>>
> >>>
> >>>DJ wrote:
> >>>
> >>>
> >>>
> >>>>I'm no overclocker (or any kind of clocker I guess). I'm testing a
> >>>>
> >>>>
> >mobo,
> >
> >
> >>>>getting ready to load Windows on this beast and when the system
> >>>>posts, the
> >>>>AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
> >>>>there are
> >>>>clock settings but I'm an idiot and don't know what to set to get tis
> >>>>thing
> >>>>happening at 2100MHZ........and since I blow stuff up sometimes, I
> >>>>want to
> >>>>at least get some advice before I fry the CPU. I'll be testing a 3
card
> >>>>Paris system on this rig to see how/if it can work with dual core
> >>>>CPU's and
> >>>>multiple C-16's so so if anyone wants to pitch in, please give me a
> >>>>
> >>>>
> >ring
> >
> >
> >>>>970-375-7081
> >>>>
> >>>>Thanks,
> >>>>
> >>>>Deej
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>--
> >>Chris Ludwig
> >>ADK
> >>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> >>www.adkproaudio.com <http://www.adkproaudio.com/>
> >>(859) 635-5762
> >>
> >>
> >
> >
> >
> >
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762
Previous Topic: You likey free chainer ?
Next Topic: Has anyone tried this?
Goto Forum:
  


Current Time: Thu Dec 05 00:56:09 PST 2024

Total time taken to generate the page: 0.02065 seconds