The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Some WC question about AES-clock-BNC distribution
Some WC question about AES-clock-BNC distribution [message #74733] Tue, 24 October 2006 04:26 Go to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Hi,
I have ordered the mytek digital clock which has 8 wc outs and one AES out.
I suppose the AES carries the wordcloc sync, right ?
Then with a AES to bnc transformer adaptor which tramnsforms the 110ohms
to 75 ohms I can probably connect another device with bnc wordclock input
, right ?

Now here is one nice question.
A AES/EBU distributor from Aardvark (1 to 6)which accepts one aes input and
outputs to 6 would that work as clock distributor ?
To further use 110/75 transformer adptors to connect more devices ?
Regards,
Dimitrios
Re: Some WC question about AES-clock-BNC distribution [message #74738 is a reply to message #74733] Tue, 24 October 2006 07:06 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_0036_01C6F754.2343B070
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Dimitrios,
I'm not sure AES/EBU carries clock. I thought it didn't.
I may be wrong. Better check on that one.
Tom
"Dimitrios" <musurgio@otenet.gr> wrote in message =
news:453df85b$1@linux...

Hi,
I have ordered the mytek digital clock which has 8 wc outs and one AES =
out.
I suppose the AES carries the wordcloc sync, right ?
Then with a AES to bnc transformer adaptor which tramnsforms the =
110ohms
to 75 ohms I can probably connect another device with bnc wordclock =
input
, right ?

Now here is one nice question.
A AES/EBU distributor from Aardvark (1 to 6)which accepts one aes =
input and
outputs to 6 would that work as clock distributor ?
To further use 110/75 transformer adptors to connect more devices ?
Regards,
Dimitrios


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0036_01C6F754.2343B070
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Dimitrios,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I'm not sure AES/EBU carries =
clock.&nbsp; I thought=20
it didn't.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I may be wrong.&nbsp; Better check on =
that=20
one.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Dimitrios" &lt;<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>&gt; wrote in =
message=20
<A =
href=3D"news:453df85b$1@linux">news:453df85b$1@linux</A>...</DIV><BR>Hi,<=
BR>I=20
have ordered the mytek digital clock which has 8 wc outs and one AES =
out.<BR>I=20
suppose the AES carries the wordcloc sync, right ?<BR>Then with a AES =
to bnc=20
transformer adaptor which tramnsforms the 110ohms<BR>to 75 ohms I can =
probably=20
connect another device with bnc wordclock input<BR>, right =
?<BR><BR>Now here=20
is one nice question.<BR>A AES/EBU distributor from Aardvark (1 to =
6)which=20
accepts one aes input and<BR>outputs to 6 would that work as clock =
distributor=20
?<BR>To further use 110/75 transformer adptors to connect more devices =

?<BR>Regards,<BR>Dimitrios</BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>&nbsp;&nbsp;&nbsp;</FONT></DIV></BODY ></HTML>

------=_NextPart_000_0036_01C6F754.2343B070--
Re: Some WC question about AES-clock-BNC distribution [message #74740 is a reply to message #74733] Tue, 24 October 2006 07:18 Go to previous messageGo to next message
gene lennon is currently offline  gene lennon
Messages: 565
Registered: July 2006
Senior Member
"Dimitrios" <musurgio@otenet.gr> wrote:

“Hi,
I have ordered the mytek digital clock which has 8 wc outs and one AES out.
I suppose the AES carries the wordcloc sync, right ?”

It should, my Mytek converter supports this.

“Then with a AES to bnc transformer adaptor which tramnsforms the 110ohms
to 75 ohms I can probably connect another device with bnc wordclock input
, right ?”

Yes. I’ve had good luck with the Canare
Transformers.

“Now here is one nice question.
A AES/EBU distributor from Aardvark (1 to 6)which accepts one aes input and
outputs to 6 would that work as clock distributor ?
To further use 110/75 transformer adaptors to connect more devices?”


This may work but it could be delayed from the original clock.


Gene
Re: Some WC question about AES-clock-BNC distribution [message #74742 is a reply to message #74738] Tue, 24 October 2006 07:24 Go to previous messageGo to next message
animix is currently offline  animix   UNITED STATES
Messages: 356
Registered: September 2006
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_00DC_01C6F745.D72B96C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

It will work just fine. I have done this sending AES out of my Mytek =
Stereo96 A/D converter to a Lucid GenX-6 with the Lucid set to =
distribute the clock signal. Just make sure the Aardsync can slave to =
sample rates above 48K if you intend to use them.

Deej

"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:453e1bf0@linux...
Dimitrios,
I'm not sure AES/EBU carries clock. I thought it didn't.
I may be wrong. Better check on that one.
Tom
"Dimitrios" <musurgio@otenet.gr> wrote in message =
news:453df85b$1@linux...

Hi,
I have ordered the mytek digital clock which has 8 wc outs and one =
AES out.
I suppose the AES carries the wordcloc sync, right ?
Then with a AES to bnc transformer adaptor which tramnsforms the =
110ohms
to 75 ohms I can probably connect another device with bnc wordclock =
input
, right ?

Now here is one nice question.
A AES/EBU distributor from Aardvark (1 to 6)which accepts one aes =
input and
outputs to 6 would that work as clock distributor ?
To further use 110/75 transformer adptors to connect more devices ?
Regards,
Dimitrios


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html =20

------=_NextPart_000_00DC_01C6F745.D72B96C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4134.100" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>It will work just fine. I have done =
this sending=20
AES out of my Mytek Stereo96 A/D converter to a Lucid GenX-6 with the =
Lucid set=20
to distribute the clock signal. Just make sure the Aardsync can slave to =
sample=20
rates above 48K if you intend to use them.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Deej</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" &lt;<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>&gt; wrote =
in message=20
<A href=3D"news:453e1bf0@linux">news:453e1bf0@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Dimitrios,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I'm not sure AES/EBU carries =
clock.&nbsp; I=20
thought it didn't.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I may be wrong.&nbsp; Better check on =
that=20
one.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Dimitrios" &lt;<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>&gt; wrote =
in message=20
<A=20
=
href=3D"news:453df85b$1@linux">news:453df85b$1@linux</A>...</DIV><BR>Hi,<=
BR>I=20
have ordered the mytek digital clock which has 8 wc outs and one AES =

out.<BR>I suppose the AES carries the wordcloc sync, right ?<BR>Then =
with a=20
AES to bnc transformer adaptor which tramnsforms the 110ohms<BR>to =
75 ohms I=20
can probably connect another device with bnc wordclock input<BR>, =
right=20
?<BR><BR>Now here is one nice question.<BR>A AES/EBU distributor =
from=20
Aardvark (1 to 6)which accepts one aes input and<BR>outputs to 6 =
would that=20
work as clock distributor ?<BR>To further use 110/75 transformer =
adptors to=20
connect more devices ?<BR>Regards,<BR>Dimitrios</BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>&nbsp;&nbsp;&nbsp;</FONT></DIV></BLOCKQUOTE ></BODY></HTML>

------=_NextPart_000_00DC_01C6F745.D72B96C0--
Re: Some WC question about AES-clock-BNC distribution [message #74744 is a reply to message #74740] Tue, 24 October 2006 07:35 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Thanks DJ,
Gene what happens if the clcock gets delayed thru the aardvaark 1x6 distributor
?
I mean I have read that many buy wordclock devices that support 3-4 wc outputs
and then they use a distributor for further clcoking, isn't it the same delaying
factor involved ?
Does this matter sonically ?
Regards,
Dimitrios

"Gene Lennon" <glennon@NOSPmyrealbox.com> wrote:
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>
>“Hi,
>I have ordered the mytek digital clock which has 8 wc outs and one AES out.
>I suppose the AES carries the wordcloc sync, right ?”
>
>It should, my Mytek converter supports this.
>
>“Then with a AES to bnc transformer adaptor which tramnsforms the 110ohms
>to 75 ohms I can probably connect another device with bnc wordclock input
>, right ?”
>
>Yes. I’ve had good luck with the Canare
>Transformers.
>
>“Now here is one nice question.
>A AES/EBU distributor from Aardvark (1 to 6)which accepts one aes input
and
>outputs to 6 would that work as clock distributor ?
>To further use 110/75 transformer adaptors to connect more devices?”
>
>
>This may work but it could be delayed from the original clock.
>
>
>Gene
>
Re: Some WC question about AES-clock-BNC distribution [message #74747 is a reply to message #74744] Tue, 24 October 2006 07:48 Go to previous messageGo to next message
gene lennon is currently offline  gene lennon
Messages: 565
Registered: July 2006
Senior Member
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Thanks DJ,
>Gene what happens if the clcock gets delayed thru the aardvaark 1x6 distributor
>?
>I mean I have read that many buy wordclock devices that support 3-4 wc outputs
>and then they use a distributor for further clcoking, isn't it the same
delaying
>factor involved ?
>Does this matter sonically ?
>Regards,
>Dimitrios

It’s the potential "Dreaded Clicks".
Like most complex wordclock setups, you will need to try it to know for sure.
Gene
Re: Some WC question about AES-clock-BNC distribution [message #74769 is a reply to message #74747] Tue, 24 October 2006 13:20 Go to previous message
Larry Upton is currently offline  Larry Upton   UNITED STATES
Messages: 30
Registered: October 2006
Member
Hey Gang,

I think that if someone were to try to jam "AES Sync" into a word clock
input, they would fail miserably.

AES Sync (or AES Black, as it is sometimes called) is a complete AES 64
bit digital word, with preamble bits, status bits, et al, but with
zeroes occupying the audio bit locations (hence the 'black' or 'silence'
designation), output at the selected sample rate. It is a very good
digital clock source, if your equipment has the appropriate port. The
folks who originally created the format worked hard to make their system
capable of self-clocking. Works well on long cabling, too, with proper
cable types and proper termination.

Word clock, on the other hand, is simply a TTL-level pulse (5V p-p) at
the selected sample rate. It is useful, as well, but don't get the two
confused. Still needs proper termination, but not very good with long
cables. "Super Clock" is a wordclock pulse at 256 times the selected
sample rate. Not used too much any more, but still available, if
needed. My Rosendahl has one output which can be set to this rate.

Check any of these signals with a scope - you'll see what I mean.

Canare 110<>75 transformers are wonderful things, but they don't change
AES Sync into word clock, or vice-versa.

Also, clock distribution systems should not introduce sufficient delays
as to be problematic, especially in a project studio or small commercial
studio. Get to the radio/TV station sized facility, and then we can
talk....

Happy clocking,

Larry Upton
KPBS TV/FM
San Diego

Gene Lennon wrote:

> "Dimitrios" <musurgio@otenet.gr> wrote:
>
>>Thanks DJ,
>>Gene what happens if the clcock gets delayed thru the aardvaark 1x6 distributor
>>?
>>I mean I have read that many buy wordclock devices that support 3-4 wc outputs
>>and then they use a distributor for further clcoking, isn't it the same
>
> delaying
>
>>factor involved ?
>>Does this matter sonically ?
>>Regards,
>>Dimitrios
>
>
> It’s the potential "Dreaded Clicks".
> Like most complex wordclock setups, you will need to try it to know for sure.
> Gene
>
Previous Topic: for DJ, Your nidiman digital bays are 16 bit
Next Topic: Optogate
Goto Forum:
  


Current Time: Thu Dec 05 07:34:55 PST 2024

Total time taken to generate the page: 0.02493 seconds