The PARIS Forums: PARIS: Main » Actually.... I could use a quick refresher

Home » The PARIS Forums » PARIS: Main » Actually.... I could use a quick refresher

Show: Today's Messages :: Polls :: Message Navigator

Actually.... I could use a quick refresher [message #70718]

Mon, 31 July 2006 18:18

cygnus

Messages: 21
Registered: June 2005

Junior Member

Since I rarely use automation, this is the one reason I went to grab
the moldy manuals that I threw out last week....

How the hell do I record fader automation?

I've got "a" and "e" selected on the three tracks, also on the submix
and global master.

Have the automation editor open.

Played the project, moved the faders, rewound, nothing.

Tried hitting "play" and "record", rewound, nothing.

I know this is easy, but I haven't done it in years and my poor, tired
brain ain't remembering.

Thanks.

pab

"Enjoy every sandwich." -- Warren Zevon

"Here at Microsoft, Quality is job, oh, I dunno, maybe 7 or 8?"

Report message to a moderator

Re: Actually.... I could use a quick refresher [message #70725 is a reply to message #70718]

Mon, 31 July 2006 20:40

cygnus

Messages: 21
Registered: June 2005

Junior Member

On Tue, 01 Aug 2006 01:18:00 GMT, cygnus_diespamdie@ctgonline.org
(Paul Braun) wrote:

>Since I rarely use automation, this is the one reason I went to grab
>the moldy manuals that I threw out last week....
>
>How the hell do I record fader automation?
>

Nevermind. I figgered it out myownself. Hold down "mute" and "solo"
at the same time until "solo" blinks fast. Then hit the channel
select button for each track until they blink fast.

Play, rewind, and watch the magic happen.

pab

"Enjoy every sandwich." -- Warren Zevon

"It's a fine line, between clever and stupid." -- David St.Hubbins

Report message to a moderator

Re: Actually.... I could use a quick refresher [message #70747 is a reply to message #70725]

Tue, 01 August 2006 11:27

John [1]
Messages: 2229
Registered: September 2005

Senior Member

check out Automation on the left at www.kfocus.com/paris

Automation Recording Procedure using the C16 Pro

1. Stop the Transport

2. NULL FADERS: Using their Null Arrow LEDs on the C16, synchronize the
Faders of the Channel strips you intend to automate with their Mixer Window
counterparts (see page 214).

3. ENABLE AUTO: Press the Auto button on the C16. The LED will begin flashing.

4. ARM CHANNELS: Press and hold the Select button on the desired channel(s)
for about one second. The red LED will light above the channel strip, indicating
that Automation Edit is enabled for that track.

5. BEGIN WRITING AUTOMATION DATA: During playback, tap the Select button
on the ARMED channel(s) to write fader automation. The yellow LED will
light indicating Automation "Write Mode".

6. PUNCH IN/OUT: You can punch in and out of Automation Write Mode by tapping
the Select button during playback. You do not need to enter "Write Mode"
to write Mute on or off automation. Make sure MUTE is disabled after recording
automation.

7. Continue recording automation data until the end of the Project, or press
the Stop button when you reach a point after which no further volume or Mute-button
changes are to occur.

8. To un-arm each Channel to stop the recording of automation data, press
and hold the channel's Select button for one second. The red LED will go
out.

9. To activate playback of each Channel's automation data, simply tap the
Channel's Select button after pressing the Auto button (LED flashing) prior
to playing back the Project.

John

Report message to a moderator

Re: Actually.... I could use a quick refresher [message #107844 is a reply to message #70725]

Sat, 14 September 2013 11:13

sassonsb

Messages: 8
Registered: November 2010

Junior Member

By the way (and it took me hours to figure this out) if you have Paris 3.0 but are using a control 16 (not the pro version which is blue, make sure that you don't have the C16 set-up boxes check for the pro. Otherwise, you can't get this automation to work.

Report message to a moderator

Previous Topic:	PARIS.exe must be called PARIS.exe on x64
Next Topic:	New PARIS machine thoughts (OS, disks, etc.)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 08:08:21 PST 2024

Total time taken to generate the page: 0.01773 seconds