Home » The PARIS Forums » PARIS: Main » Coverter Recommendations Please
| Coverter Recommendations Please [message #80325] |
Mon, 19 February 2007 09:02  |
TC
Messages: 327
Registered: September 2005
|
Senior Member |
|
|
Hi all,
I'm looking for recommendations on a decent 8 channel a/d d/a converter box.
I need something that can come in and out via adat optical.
A friend of mine is going to loan me his Folcrom passive summing box to try out (he swears by it with logic audio),
but I currently only have 8 analog outs on my digi 96 i/o, so I want to get something to connect to the adat i/o's
to allow for 16 channels in and out to the folcrom.
I do have an M-Audio project mix that I just use as a control surface, which has adat i/o and wordclock, so technically
I could use this, but I'm guessing that the converters are not really going to cut it for what I'm trying to listen for when
doing comparisons between itb and the folcrom.
Any suggestions? I'm kind of looking for something that's cost effective, or something I could find used on ebay etc.
Here is the link for the folcrum. DJ, I think you should just buy one of these for your cubase rig and let me know how it sounds :-)
http://www.rollmusic.com/systems/folcrom.shtml
Cheers,
TC
|
|
|
|
| Re: Coverter Recommendations Please [message #80326 is a reply to message #80325] |
Mon, 19 February 2007 09:29  |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
I've got a friend who has a studio in Texas who uses the Folcrom. You can
call him and discuss this with him if you like. His name is Ken Morgan and
this is his studio:
http://www.wirelinestudio.com/
You can let him know I referred you.
As far as the AD/DA box goes, I've got a couple of RNC ADI-8 DS units here
and also a Multiface. I don't have a lot of time on them yet, but I'm very
impressed so far. these are 96k capable converters and if you're interfacing
with Paris via ADAT you could go with their less expensive 48k units. If
you're looking for transparency and detail rather than color for a good
price, these may be the ticket. they are available on EBay for around
$500-7-00.00 pretty regularly. The Multiface can be used as a standalone
AD/DA converter only after it is set to *disconnect* mode in the firmware
and this has to be done while it is interfacing with the RME PCI card, so if
you find a standalone multiface somewhere, you will have to jump through
some hoops to make it standalone ready.
I'd go with one of these.............
http://www.rme-audio.com/english/adi/adi8.htm
;o)
Deej
"TC" <tc@spammetodeathyoubastards.org> wrote in message
news:45d9d886$1@linux...
>
> Hi all,
>
> I'm looking for recommendations on a decent 8 channel a/d d/a converter
> box.
>
> I need something that can come in and out via adat optical.
>
> A friend of mine is going to loan me his Folcrom passive summing box to
> try out (he swears by it with logic audio),
> but I currently only have 8 analog outs on my digi 96 i/o, so I want to
> get something to connect to the adat i/o's
> to allow for 16 channels in and out to the folcrom.
>
> I do have an M-Audio project mix that I just use as a control surface,
> which has adat i/o and wordclock, so technically
> I could use this, but I'm guessing that the converters are not really
> going to cut it for what I'm trying to listen for when
> doing comparisons between itb and the folcrom.
>
> Any suggestions? I'm kind of looking for something that's cost effective,
> or something I could find used on ebay etc.
>
>
> Here is the link for the folcrum. DJ, I think you should just buy one of
> these for your cubase rig and let me know how it sounds :-)
>
> http://www.rollmusic.com/systems/folcrom.shtml
>
> Cheers,
>
> TC
>
|
|
|
|
| Re: Coverter Recommendations Please [message #80327 is a reply to message #80326] |
Mon, 19 February 2007 10:16 |
TC
Messages: 327
Registered: September 2005
|
Senior Member |
|
|
Hi DJ,
Thanks a lot for that info.
I just realized that the adat ports on the 96i/o will only do 8 channels at 48k or less.
I wanted to start doing projects at 88.2, but I guess that will have to wait.
Thanks for the suggestions, I'll research that. I used to have a multiface that
I got from Thad, but I sold it years ago after going to PT (kicking myself now..).
Standalone mode sounds like it would be the ticket..
Cheers,
TC
DJ wrote:
> I've got a friend who has a studio in Texas who uses the Folcrom. You can
> call him and discuss this with him if you like. His name is Ken Morgan and
> this is his studio:
>
> http://www.wirelinestudio.com/
>
> You can let him know I referred you.
>
> As far as the AD/DA box goes, I've got a couple of RNC ADI-8 DS units here
> and also a Multiface. I don't have a lot of time on them yet, but I'm very
> impressed so far. these are 96k capable converters and if you're interfacing
> with Paris via ADAT you could go with their less expensive 48k units. If
> you're looking for transparency and detail rather than color for a good
> price, these may be the ticket. they are available on EBay for around
> $500-7-00.00 pretty regularly. The Multiface can be used as a standalone
> AD/DA converter only after it is set to *disconnect* mode in the firmware
> and this has to be done while it is interfacing with the RME PCI card, so if
> you find a standalone multiface somewhere, you will have to jump through
> some hoops to make it standalone ready.
>
> I'd go with one of these.............
>
> http://www.rme-audio.com/english/adi/adi8.htm
>
> ;o)
>
> Deej
|
|
|
|
| Re: Coverter Recommendations Please [message #80328 is a reply to message #80327] |
Mon, 19 February 2007 11:27 |
neil[1]
Messages: 164
Registered: October 2006
|
Senior Member |
|
|
I'll second the Multiface as a good choice.
By the way, ANY lightpipe port will only do 4 channels at 88.2k
& 96k.
Neil
TC <tc@spammetodeathyoubastards.org> wrote:
>Hi DJ,
>
>Thanks a lot for that info.
>
>I just realized that the adat ports on the 96i/o will only do 8 channels
at 48k or less.
>
>I wanted to start doing projects at 88.2, but I guess that will have to
wait.
>
>Thanks for the suggestions, I'll research that. I used to have a multiface
that
>I got from Thad, but I sold it years ago after going to PT (kicking myself
now..).
>
>Standalone mode sounds like it would be the ticket..
>
>Cheers,
>
>TC
>
>DJ wrote:
>> I've got a friend who has a studio in Texas who uses the Folcrom. You
can
>> call him and discuss this with him if you like. His name is Ken Morgan
and
>> this is his studio:
>>
>> http://www.wirelinestudio.com/
>>
>> You can let him know I referred you.
>>
>> As far as the AD/DA box goes, I've got a couple of RNC ADI-8 DS units
here
>> and also a Multiface. I don't have a lot of time on them yet, but I'm
very
>> impressed so far. these are 96k capable converters and if you're interfacing
>> with Paris via ADAT you could go with their less expensive 48k units.
If
>> you're looking for transparency and detail rather than color for a good
>> price, these may be the ticket. they are available on EBay for around
>> $500-7-00.00 pretty regularly. The Multiface can be used as a standalone
>> AD/DA converter only after it is set to *disconnect* mode in the firmware
>> and this has to be done while it is interfacing with the RME PCI card,
so if
>> you find a standalone multiface somewhere, you will have to jump through
>> some hoops to make it standalone ready.
>>
>> I'd go with one of these.............
>>
>> http://www.rme-audio.com/english/adi/adi8.htm
>>
>> ;o)
>>
>> Deej
|
|
|
|
| Re: Coverter Recommendations Please [message #80329 is a reply to message #80327] |
Mon, 19 February 2007 10:32 |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
For eight tracks at 88.2 you will need double wire. The ADI8-DS will do this
if you are interfaced with two ADAT ports on a sound card with drivers
capable of 88.2 (like the RME HDSP 9652 for instance). Otherwise you will
only be capable of 4 x tracks at 88.2. The Multiface only has one ADAT I/O
and so it will give you 4 x tracks at 88.2 in standalone mode. In disconnect
mode, you will not be able to access any of it's other functions (midi and
s/pdif) other than I think it should be able to recognize the WC I/O.
Deej
"TC" <tc@spammetodeathyoubastards.org> wrote in message
news:45d9e9cc@linux...
> Hi DJ,
>
> Thanks a lot for that info.
>
> I just realized that the adat ports on the 96i/o will only do 8 channels
> at 48k or less.
>
> I wanted to start doing projects at 88.2, but I guess that will have to
> wait.
>
> Thanks for the suggestions, I'll research that. I used to have a multiface
> that
> I got from Thad, but I sold it years ago after going to PT (kicking myself
> now..).
>
> Standalone mode sounds like it would be the ticket..
>
> Cheers,
>
> TC
>
> DJ wrote:
>> I've got a friend who has a studio in Texas who uses the Folcrom. You can
>> call him and discuss this with him if you like. His name is Ken Morgan
>> and this is his studio:
>>
>> http://www.wirelinestudio.com/
>>
>> You can let him know I referred you.
>>
>> As far as the AD/DA box goes, I've got a couple of RNC ADI-8 DS units
>> here and also a Multiface. I don't have a lot of time on them yet, but
>> I'm very impressed so far. these are 96k capable converters and if you're
>> interfacing with Paris via ADAT you could go with their less expensive
>> 48k units. If you're looking for transparency and detail rather than
>> color for a good price, these may be the ticket. they are available on
>> EBay for around $500-7-00.00 pretty regularly. The Multiface can be used
>> as a standalone AD/DA converter only after it is set to *disconnect* mode
>> in the firmware and this has to be done while it is interfacing with the
>> RME PCI card, so if you find a standalone multiface somewhere, you will
>> have to jump through some hoops to make it standalone ready.
>>
>> I'd go with one of these.............
>>
>> http://www.rme-audio.com/english/adi/adi8.htm
>>
>> ;o)
>>
>> Deej
|
|
|
|
|
|
|
|
| Re: Coverter Recommendations Please [message #80336 is a reply to message #80325] |
Mon, 19 February 2007 12:38 |
Paul Artola
Messages: 161
Registered: November 2005
|
Senior Member |
|
|
TC -
I have recently been reworking my studio and along the way I picked up
a pair of Steinberg/RME Multisets (another name for the original
Multiface) and a single PCI HDSP card. I got the Multisets off ebay -
one for $200 and the other for $300. The PCI card cost $240. These
make a killer combination for the money, I think.
- Paul Artola
Ellicott City, Maryland
On Mon, 19 Feb 2007 09:02:52 -0800, TC
<tc@spammetodeathyoubastards.org> wrote:
>
>Hi all,
>
>I'm looking for recommendations on a decent 8 channel a/d d/a converter box.
>
>I need something that can come in and out via adat optical.
>
>A friend of mine is going to loan me his Folcrom passive summing box to try out (he swears by it with logic audio),
>but I currently only have 8 analog outs on my digi 96 i/o, so I want to get something to connect to the adat i/o's
>to allow for 16 channels in and out to the folcrom.
>
>I do have an M-Audio project mix that I just use as a control surface, which has adat i/o and wordclock, so technically
>I could use this, but I'm guessing that the converters are not really going to cut it for what I'm trying to listen for when
>doing comparisons between itb and the folcrom.
>
>Any suggestions? I'm kind of looking for something that's cost effective, or something I could find used on ebay etc.
>
>
>Here is the link for the folcrum. DJ, I think you should just buy one of these for your cubase rig and let me know how it sounds :-)
>
>http://www.rollmusic.com/systems/folcrom.shtml
>
>Cheers,
>
>TC
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Wed Dec 11 07:03:06 PST 2024
Total time taken to generate the page: 0.01329 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
