The PARIS Forums: PARIS: Main » Can't Record in both MECS simultaneously... HELP!!!

Home » The PARIS Forums » PARIS: Main » Can't Record in both MECS simultaneously... HELP!!!

Show: Today's Messages :: Polls :: Message Navigator

Can't Record in both MECS simultaneously... HELP!!! [message #102707]

Tue, 03 March 2009 12:33

Kip Sonnier

Messages: 32
Registered: December 2005

Member

Just Upgraded MB/cpu/Ram to Dual Core,

I had a 5 pci slot board w AMD2200 and 512ram,
2 mecs,
3 eds 1000 cards,
Lucid word clock genx6-96 setup for years with no problems.
I get signal on 2nd Mec but no Sound. 3 sub mixes with tracks play with no
problem. I do get sound on 1st mec when recording.
i've got
wc out 1- 1 WC cable out to in Mec 1,
wc out 2- 1 WC cable out to in Mec 2,
wc out 3- 1 WC cable out to in RME Multiface 2
wc out 4- 1 WC cable out to in Echo Layla
i ve' had it like this for years and had no problems.

I i'm using Paris 3 with ParisMulticore Beta 3.1 drivers

Report message to a moderator

Re: Can't Record in both MECS simultaneously... HELP!!! [message #102711 is a reply to message #102707]

Tue, 03 March 2009 19:51

audioguy_editout_

Messages: 249
Registered: December 2005

Senior Member

Try looping the WC from MEC 1 to MEC 2 instead of a direct line to each
(direct feed to MEC 1 from GenX). Place MEC 2 on Card "C", select WC
sync in the Project window and see what happens.

David.

Kip wrote:
> Just Upgraded MB/cpu/Ram to Dual Core,
>
> I had a 5 pci slot board w AMD2200 and 512ram,
> 2 mecs,
> 3 eds 1000 cards,
> Lucid word clock genx6-96 setup for years with no problems.
> I get signal on 2nd Mec but no Sound. 3 sub mixes with tracks play with no
> problem. I do get sound on 1st mec when recording.
> i've got
> wc out 1- 1 WC cable out to in Mec 1,
> wc out 2- 1 WC cable out to in Mec 2,
> wc out 3- 1 WC cable out to in RME Multiface 2
> wc out 4- 1 WC cable out to in Echo Layla
> i ve' had it like this for years and had no problems.
>
> I i'm using Paris 3 with ParisMulticore Beta 3.1 drivers
>

Report message to a moderator

Re: Can't Record in both MECS simultaneously... HELP!!! [message #102721 is a reply to message #102711]

Wed, 04 March 2009 08:46

Kip Sonnier

Messages: 32
Registered: December 2005

Member

You mean wc out mec 1 to wc in mec 2 and wc out mec 2 to wc in mec 1

"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote:
>Try looping the WC from MEC 1 to MEC 2 instead of a direct line to each

>(direct feed to MEC 1 from GenX). Place MEC 2 on Card "C", select WC
>sync in the Project window and see what happens.
>
>David.
>
>Kip wrote:
>> Just Upgraded MB/cpu/Ram to Dual Core,
>>
>> I had a 5 pci slot board w AMD2200 and 512ram,
>> 2 mecs,
>> 3 eds 1000 cards,
>> Lucid word clock genx6-96 setup for years with no problems.
>> I get signal on 2nd Mec but no Sound. 3 sub mixes with tracks play with
no
>> problem. I do get sound on 1st mec when recording.
>> i've got
>> wc out 1- 1 WC cable out to in Mec 1,
>> wc out 2- 1 WC cable out to in Mec 2,
>> wc out 3- 1 WC cable out to in RME Multiface 2
>> wc out 4- 1 WC cable out to in Echo Layla
>> i ve' had it like this for years and had no problems.
>>
>> I i'm using Paris 3 with ParisMulticore Beta 3.1 drivers
>>

Report message to a moderator

Re: Can't Record in both MECS simultaneously... HELP!!! [message #102723 is a reply to message #102721]

Wed, 04 March 2009 13:17

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

Kip,

You don't need WC out Mec 2. Terminate Mec 2 if you have one. It isn't
always needed though. Just daisy chain WC Mec 1 out to WC in Mec 2.
Genex WC out to WC in Mec 1.

Tom

"Kip" <fender36@cox.net> wrote in message news:49aeb514$1@linux...
>
> You mean wc out mec 1 to wc in mec 2 and wc out mec 2 to wc in mec 1
>
>
> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote:
>>Try looping the WC from MEC 1 to MEC 2 instead of a direct line to each
>
>>(direct feed to MEC 1 from GenX). Place MEC 2 on Card "C", select WC
>>sync in the Project window and see what happens.
>>
>>David.
>>
>>Kip wrote:
>>> Just Upgraded MB/cpu/Ram to Dual Core,
>>>
>>> I had a 5 pci slot board w AMD2200 and 512ram,
>>> 2 mecs,
>>> 3 eds 1000 cards,
>>> Lucid word clock genx6-96 setup for years with no problems.
>>> I get signal on 2nd Mec but no Sound. 3 sub mixes with tracks play with
> no
>>> problem. I do get sound on 1st mec when recording.
>>> i've got
>>> wc out 1- 1 WC cable out to in Mec 1,
>>> wc out 2- 1 WC cable out to in Mec 2,
>>> wc out 3- 1 WC cable out to in RME Multiface 2
>>> wc out 4- 1 WC cable out to in Echo Layla
>>> i ve' had it like this for years and had no problems.
>>>
>>> I i'm using Paris 3 with ParisMulticore Beta 3.1 drivers
>>>
>

Report message to a moderator

Previous Topic:	Aux routing
Next Topic:	New faster Apple computers, FW400 is dead

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Dec 24 02:46:57 PST 2024

Total time taken to generate the page: 0.01556 seconds