Home » The PARIS Forums » PARIS: Main » Jitter on Firewire & USB protocols - Bob Katz replies
| Jitter on Firewire & USB protocols - Bob Katz replies [message #93924] |
Sun, 23 December 2007 17:26  |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
In a recent thread here that had a question come up with regard
to jitter, I mentioned that Bob Katz pointed out in his book
that Firewire tended to be more prone to jitter. Since I've
been shopping around for a laptop - mainly for general office-
type use (documents, spreadsheets, etc), but would also like to
have the option of using it for audio should the need arise, I
thought I'd try e-mailing him with a question about UBS vs.
Firewire jitter... he responded pretty quickly, I must say, and
I thought I'd post his answer in case it might be helpful to
anyone else here, whether they're using such an interface for
laptop, or desktop use:
<begin paste of my question & his reply>
Hi Bob...
I am in the process of reading your Mastering Audio book, and I
noticed that you mention in there that Firewire tends to be
more jitter-prone. If I'm looking for a mobile solution (for
remote recording into a laptop), do you feel that the USB 2.0
protocol is better than Firewire? Worse? Not much different?
HI, NEIL. Thanks for writing.
What you need is an interface which provides a stable clock to
the converters and does not get its clock from the Firewire OR
the USB. Look to companies that specialize in high quality
conversion first and are aware of these issues. When in doubt,
quiz the company engineers (not just the sales people), don't
just take their advertising for granted.
I hope this helps,
Bob
<end paste>
I don't know of any offhand that specifically get their clock
from either internally or externally, as opposed to from the FW
or USB port itself, xcept for the RME Fireface 400 & 800, which
can be externally-clocked; but now we at least know what to
look for for best audio quality when using these types of
interfaces (interfascia?) :)
Neil
|
|
|
|
| Re: Jitter on Firewire & USB protocols - Bob Katz replies [message #93930 is a reply to message #93924] |
Sun, 23 December 2007 20:20  |
Bill L
Messages: 766
Registered: August 2006
|
Senior Member |
|
|
If I understand him (which I may not) it sounds like he is saying that
the interface should be clocked to itself, not getting clock from the
computer via USB or FW.
Neil wrote:
> In a recent thread here that had a question come up with regard
> to jitter, I mentioned that Bob Katz pointed out in his book
> that Firewire tended to be more prone to jitter. Since I've
> been shopping around for a laptop - mainly for general office-
> type use (documents, spreadsheets, etc), but would also like to
> have the option of using it for audio should the need arise, I
> thought I'd try e-mailing him with a question about UBS vs.
> Firewire jitter... he responded pretty quickly, I must say, and
> I thought I'd post his answer in case it might be helpful to
> anyone else here, whether they're using such an interface for
> laptop, or desktop use:
>
> <begin paste of my question & his reply>
> Hi Bob...
> I am in the process of reading your Mastering Audio book, and I
> noticed that you mention in there that Firewire tends to be
> more jitter-prone. If I'm looking for a mobile solution (for
> remote recording into a laptop), do you feel that the USB 2.0
> protocol is better than Firewire? Worse? Not much different?
>
> HI, NEIL. Thanks for writing.
> What you need is an interface which provides a stable clock to
> the converters and does not get its clock from the Firewire OR
> the USB. Look to companies that specialize in high quality
> conversion first and are aware of these issues. When in doubt,
> quiz the company engineers (not just the sales people), don't
> just take their advertising for granted.
>
> I hope this helps,
>
> Bob
> <end paste>
>
> I don't know of any offhand that specifically get their clock
> from either internally or externally, as opposed to from the FW
> or USB port itself, xcept for the RME Fireface 400 & 800, which
> can be externally-clocked; but now we at least know what to
> look for for best audio quality when using these types of
> interfaces (interfascia?) :)
>
> Neil
|
|
|
|
| Re: Jitter on Firewire & USB protocols - Bob Katz replies [message #93935 is a reply to message #93930] |
Mon, 24 December 2007 01:01 |
Nil
Messages: 245
Registered: March 2007
|
Senior Member |
|
|
Yes, either clocked to itself or externally-clocked.
Neil
Bill L <bill@billlorentzen.com> wrote:
>If I understand him (which I may not) it sounds like he is saying that
>the interface should be clocked to itself, not getting clock from the
>computer via USB or FW.
>
>Neil wrote:
>> In a recent thread here that had a question come up with regard
>> to jitter, I mentioned that Bob Katz pointed out in his book
>> that Firewire tended to be more prone to jitter. Since I've
>> been shopping around for a laptop - mainly for general office-
>> type use (documents, spreadsheets, etc), but would also like to
>> have the option of using it for audio should the need arise, I
>> thought I'd try e-mailing him with a question about UBS vs.
>> Firewire jitter... he responded pretty quickly, I must say, and
>> I thought I'd post his answer in case it might be helpful to
>> anyone else here, whether they're using such an interface for
>> laptop, or desktop use:
>>
>> <begin paste of my question & his reply>
>> Hi Bob...
>> I am in the process of reading your Mastering Audio book, and I
>> noticed that you mention in there that Firewire tends to be
>> more jitter-prone. If I'm looking for a mobile solution (for
>> remote recording into a laptop), do you feel that the USB 2.0
>> protocol is better than Firewire? Worse? Not much different?
>>
>> HI, NEIL. Thanks for writing.
>> What you need is an interface which provides a stable clock to
>> the converters and does not get its clock from the Firewire OR
>> the USB. Look to companies that specialize in high quality
>> conversion first and are aware of these issues. When in doubt,
>> quiz the company engineers (not just the sales people), don't
>> just take their advertising for granted.
>>
>> I hope this helps,
>>
>> Bob
>> <end paste>
>>
>> I don't know of any offhand that specifically get their clock
>> from either internally or externally, as opposed to from the FW
>> or USB port itself, xcept for the RME Fireface 400 & 800, which
>> can be externally-clocked; but now we at least know what to
>> look for for best audio quality when using these types of
>> interfaces (interfascia?) :)
>>
>> Neil
|
|
|
|
Goto Forum:
Current Time: Wed Dec 11 13:47:29 PST 2024
Total time taken to generate the page: 0.01209 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
