Home » The PARIS Forums » PARIS: Main » error 1/1 - help!
|
|
| Re: error 1/1 - help! [message #79913 is a reply to message #79910] |
Sun, 11 February 2007 21:25   |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
1/1 means the software doesn't recognize a usable hardware set. Check IRQ
sharing, make sure that you see the EDS in the hardware list correctly, and
make sure the connection from the MEC to the EDS is all good. Be very sure
of these things, and be methodical and you'll find it.
AA
"RiverLake Farms" <edna@texomaonline.com> wrote in message
news:45cfef8b@linux...
>I attemted to move Paris to an older AMD based computer, to free up my P4
>for VSTis. I went thru the installation as outlined for 3.0 under XP,
>although I didn't get the scherzo installed til last. Anyway, now I am
>getting the failure to load Paris engine, error 1/1, which as far as I can
>find out means that Paris is not finding the scherzo driver. There are no
>conflicts showing in device manager, and the scherzo is listed in System
>Devices as "working." Video card (G400 matrox) is on an irq by itself.
>Anyone have any hints as to what I can try?
>
|
|
|
|
| Re: error 1/1 - help! [message #79920 is a reply to message #79913] |
Mon, 12 February 2007 06:04 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
Thanks Aaron. It has its own IRQ, not shared. The EDS was detected, as I
got the "found new hardware, multimedia audio controller" thing. However,
it didn't want to accept the scherzo as a driver - I had to manually force
it to accept it, as per instructions for manual installation. It did then
put it in system devices and says its working properly. I also have the
midi driver in DM under sound. I might try changing the pci slot, its now
in slot one, and a different video card.
"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:45cffaaa$1@linux...
> 1/1 means the software doesn't recognize a usable hardware set. Check IRQ
> sharing, make sure that you see the EDS in the hardware list correctly,
> and make sure the connection from the MEC to the EDS is all good. Be very
> sure of these things, and be methodical and you'll find it.
>
> AA
>
> "RiverLake Farms" <edna@texomaonline.com> wrote in message
> news:45cfef8b@linux...
>>I attemted to move Paris to an older AMD based computer, to free up my P4
>>for VSTis. I went thru the installation as outlined for 3.0 under XP,
>>although I didn't get the scherzo installed til last. Anyway, now I am
>>getting the failure to load Paris engine, error 1/1, which as far as I can
>>find out means that Paris is not finding the scherzo driver. There are no
>>conflicts showing in device manager, and the scherzo is listed in System
>>Devices as "working." Video card (G400 matrox) is on an irq by itself.
>>Anyone have any hints as to what I can try?
>>
>
>
|
|
|
|
| Re: error 1/1 - help! [message #79922 is a reply to message #79920] |
Mon, 12 February 2007 06:24 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
Almost assured that slot one is sharing with your video card. Move to slot 2
or 3.
AA
"RiverLake Farms" <edna@texomaonline.com> wrote in message
news:45d0745e@linux...
> Thanks Aaron. It has its own IRQ, not shared. The EDS was detected, as I
> got the "found new hardware, multimedia audio controller" thing. However,
> it didn't want to accept the scherzo as a driver - I had to manually force
> it to accept it, as per instructions for manual installation. It did then
> put it in system devices and says its working properly. I also have the
> midi driver in DM under sound. I might try changing the pci slot, its now
> in slot one, and a different video card.
> "Aaron Allen" <know-spam@not_here.dude> wrote in message
> news:45cffaaa$1@linux...
>> 1/1 means the software doesn't recognize a usable hardware set. Check IRQ
>> sharing, make sure that you see the EDS in the hardware list correctly,
>> and make sure the connection from the MEC to the EDS is all good. Be very
>> sure of these things, and be methodical and you'll find it.
>>
>> AA
>>
>> "RiverLake Farms" <edna@texomaonline.com> wrote in message
>> news:45cfef8b@linux...
>>>I attemted to move Paris to an older AMD based computer, to free up my P4
>>>for VSTis. I went thru the installation as outlined for 3.0 under XP,
>>>although I didn't get the scherzo installed til last. Anyway, now I am
>>>getting the failure to load Paris engine, error 1/1, which as far as I
>>>can find out means that Paris is not finding the scherzo driver. There
>>>are no conflicts showing in device manager, and the scherzo is listed in
>>>System Devices as "working." Video card (G400 matrox) is on an irq by
>>>itself. Anyone have any hints as to what I can try?
>>>
>>
>>
>
>
|
|
|
|
| Re: error 1/1 - help! [message #79924 is a reply to message #79922] |
Mon, 12 February 2007 07:32 |
neil[1]
Messages: 164
Registered: October 2006
|
Senior Member |
|
|
Yup, 99.997% chance of this being the case... I was never able
to get an EDS card working right in slot #1 on either mobo I
had in my older Paris rig, and when I assembled my recent one I
didn't even try it - set up like a dream with no problems.
Neil
"Aaron Allen" <know-spam@not_here.dude> wrote:
>Almost assured that slot one is sharing with your video card. Move to slot
2
>or 3.
>
>AA
>
>
>"RiverLake Farms" <edna@texomaonline.com> wrote in message
>news:45d0745e@linux...
>> Thanks Aaron. It has its own IRQ, not shared. The EDS was detected,
as I
>> got the "found new hardware, multimedia audio controller" thing. However,
>> it didn't want to accept the scherzo as a driver - I had to manually force
>> it to accept it, as per instructions for manual installation. It did
then
>> put it in system devices and says its working properly. I also have the
>> midi driver in DM under sound. I might try changing the pci slot, its
now
>> in slot one, and a different video card.
>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>> news:45cffaaa$1@linux...
>>> 1/1 means the software doesn't recognize a usable hardware set. Check
IRQ
>>> sharing, make sure that you see the EDS in the hardware list correctly,
>>> and make sure the connection from the MEC to the EDS is all good. Be
very
>>> sure of these things, and be methodical and you'll find it.
>>>
>>> AA
>>>
>>> "RiverLake Farms" <edna@texomaonline.com> wrote in message
>>> news:45cfef8b@linux...
>>>>I attemted to move Paris to an older AMD based computer, to free up my
P4
>>>>for VSTis. I went thru the installation as outlined for 3.0 under XP,
>>>>although I didn't get the scherzo installed til last. Anyway, now I
am
>>>>getting the failure to load Paris engine, error 1/1, which as far as
I
>>>>can find out means that Paris is not finding the scherzo driver. There
>>>>are no conflicts showing in device manager, and the scherzo is listed
in
>>>>System Devices as "working." Video card (G400 matrox) is on an irq by
>>>>itself. Anyone have any hints as to what I can try?
>>>>
>>>
>>>
>>
>>
>
>
|
|
|
|
| Re: error 1/1 - help! [message #79961 is a reply to message #79922] |
Mon, 12 February 2007 15:50 |
michael
Messages: 13
Registered: March 2007
|
Junior Member |
|
|
hy guys,
i always have the same problem and i cant see the eds in the hardware list,
ive used the driver of interlok and the other drivers they'll found here
at the newsgroups!
can anybody help me with an actually set up for xp using???
my sytem is a pc intel 2,4 ghz 1056 ram and asrock p4i65g motherboard
i hope that anybody can help me
michael
"Aaron Allen" <know-spam@not_here.dude> wrote:
>Almost assured that slot one is sharing with your video card. Move to slot
2
>or 3.
>
>AA
>
>
>"RiverLake Farms" <edna@texomaonline.com> wrote in message
>news:45d0745e@linux...
>> Thanks Aaron. It has its own IRQ, not shared. The EDS was detected,
as I
>> got the "found new hardware, multimedia audio controller" thing. However,
>> it didn't want to accept the scherzo as a driver - I had to manually force
>> it to accept it, as per instructions for manual installation. It did
then
>> put it in system devices and says its working properly. I also have the
>> midi driver in DM under sound. I might try changing the pci slot, its
now
>> in slot one, and a different video card.
>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>> news:45cffaaa$1@linux...
>>> 1/1 means the software doesn't recognize a usable hardware set. Check
IRQ
>>> sharing, make sure that you see the EDS in the hardware list correctly,
>>> and make sure the connection from the MEC to the EDS is all good. Be
very
>>> sure of these things, and be methodical and you'll find it.
>>>
>>> AA
>>>
>>> "RiverLake Farms" <edna@texomaonline.com> wrote in message
>>> news:45cfef8b@linux...
>>>>I attemted to move Paris to an older AMD based computer, to free up my
P4
>>>>for VSTis. I went thru the installation as outlined for 3.0 under XP,
>>>>although I didn't get the scherzo installed til last. Anyway, now I
am
>>>>getting the failure to load Paris engine, error 1/1, which as far as
I
>>>>can find out means that Paris is not finding the scherzo driver. There
>>>>are no conflicts showing in device manager, and the scherzo is listed
in
>>>>System Devices as "working." Video card (G400 matrox) is on an irq by
>>>>itself. Anyone have any hints as to what I can try?
>>>>
>>>
>>>
>>
>>
>
>
|
|
|
|
| Re: error 1/1 - help! [message #79963 is a reply to message #79924] |
Mon, 12 February 2007 15:43 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
Thanks guys. I'll switch the slot. I did have it in slot 1 in my previous
P4 machine(with Nforce 2 video card) and it worked great.
"Neil" <IOUOIU@OIU.com> wrote in message news:45d07a76$1@linux...
>
> Yup, 99.997% chance of this being the case... I was never able
> to get an EDS card working right in slot #1 on either mobo I
> had in my older Paris rig, and when I assembled my recent one I
> didn't even try it - set up like a dream with no problems.
>
> Neil
>
>
> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>Almost assured that slot one is sharing with your video card. Move to slot
> 2
>>or 3.
>>
>>AA
>>
>>
>>"RiverLake Farms" <edna@texomaonline.com> wrote in message
>>news:45d0745e@linux...
>>> Thanks Aaron. It has its own IRQ, not shared. The EDS was detected,
> as I
>>> got the "found new hardware, multimedia audio controller" thing.
>>> However,
>
>>> it didn't want to accept the scherzo as a driver - I had to manually
>>> force
>
>>> it to accept it, as per instructions for manual installation. It did
> then
>>> put it in system devices and says its working properly. I also have the
>
>>> midi driver in DM under sound. I might try changing the pci slot, its
> now
>>> in slot one, and a different video card.
>>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>>> news:45cffaaa$1@linux...
>>>> 1/1 means the software doesn't recognize a usable hardware set. Check
> IRQ
>>>> sharing, make sure that you see the EDS in the hardware list correctly,
>
>>>> and make sure the connection from the MEC to the EDS is all good. Be
> very
>>>> sure of these things, and be methodical and you'll find it.
>>>>
>>>> AA
>>>>
>>>> "RiverLake Farms" <edna@texomaonline.com> wrote in message
>>>> news:45cfef8b@linux...
>>>>>I attemted to move Paris to an older AMD based computer, to free up my
> P4
>>>>>for VSTis. I went thru the installation as outlined for 3.0 under XP,
>
>>>>>although I didn't get the scherzo installed til last. Anyway, now I
> am
>>>>>getting the failure to load Paris engine, error 1/1, which as far as
> I
>>>>>can find out means that Paris is not finding the scherzo driver. There
>
>>>>>are no conflicts showing in device manager, and the scherzo is listed
> in
>>>>>System Devices as "working." Video card (G400 matrox) is on an irq by
>
>>>>>itself. Anyone have any hints as to what I can try?
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
|
|
|
|
| Re: error 1/1 - help! [message #79971 is a reply to message #79963] |
Mon, 12 February 2007 17:36 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
Well changing to slot 2 did cause a change: as its booting into the
software, the mec will sync but then I get the error message 7/7. The c-16
never lights. I guess I might try another video card (non matrox) and see
if that helps.
I did try another scsi cable, no effect. I hope I haven't damaged the eds
card somehow.
"RiverLake Farms" <edna@texomaonline.com> wrote in message
news:45d0fc0d@linux...
> Thanks guys. I'll switch the slot. I did have it in slot 1 in my
> previous P4 machine(with Nforce 2 video card) and it worked great.
>
> "Neil" <IOUOIU@OIU.com> wrote in message news:45d07a76$1@linux...
>>
>> Yup, 99.997% chance of this being the case... I was never able
>> to get an EDS card working right in slot #1 on either mobo I
>> had in my older Paris rig, and when I assembled my recent one I
>> didn't even try it - set up like a dream with no problems.
>>
>> Neil
>>
>>
>> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>>Almost assured that slot one is sharing with your video card. Move to
>>>slot
>> 2
>>>or 3.
>>>
>>>AA
>>>
>>>
>>>"RiverLake Farms" <edna@texomaonline.com> wrote in message
>>>news:45d0745e@linux...
>>>> Thanks Aaron. It has its own IRQ, not shared. The EDS was detected,
>> as I
>>>> got the "found new hardware, multimedia audio controller" thing.
>>>> However,
>>
>>>> it didn't want to accept the scherzo as a driver - I had to manually
>>>> force
>>
>>>> it to accept it, as per instructions for manual installation. It did
>> then
>>>> put it in system devices and says its working properly. I also have
>>>> the
>>
>>>> midi driver in DM under sound. I might try changing the pci slot, its
>> now
>>>> in slot one, and a different video card.
>>>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>> news:45cffaaa$1@linux...
>>>>> 1/1 means the software doesn't recognize a usable hardware set. Check
>> IRQ
>>>>> sharing, make sure that you see the EDS in the hardware list
>>>>> correctly,
>>
>>>>> and make sure the connection from the MEC to the EDS is all good. Be
>> very
>>>>> sure of these things, and be methodical and you'll find it.
>>>>>
>>>>> AA
>>>>>
>>>>> "RiverLake Farms" <edna@texomaonline.com> wrote in message
>>>>> news:45cfef8b@linux...
>>>>>>I attemted to move Paris to an older AMD based computer, to free up my
>> P4
>>>>>>for VSTis. I went thru the installation as outlined for 3.0 under XP,
>>
>>>>>>although I didn't get the scherzo installed til last. Anyway, now I
>> am
>>>>>>getting the failure to load Paris engine, error 1/1, which as far as
>> I
>>>>>>can find out means that Paris is not finding the scherzo driver.
>>>>>>There
>>
>>>>>>are no conflicts showing in device manager, and the scherzo is listed
>> in
>>>>>>System Devices as "working." Video card (G400 matrox) is on an irq by
>>
>>>>>>itself. Anyone have any hints as to what I can try?
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
>
|
|
|
|
| Re: error 1/1 - help! [message #79974 is a reply to message #79971] |
Mon, 12 February 2007 18:34 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
Before you do that remove ALL instances of scherzo in the hardware list in
safe mode. Make it reinstall completely. 7/7 still means it doesn't see a
card.
AA
"RiverLake Farms" <edna@texomaonline.com> wrote in message
news:45d11671@linux...
> Well changing to slot 2 did cause a change: as its booting into the
> software, the mec will sync but then I get the error message 7/7. The
> c-16 never lights. I guess I might try another video card (non matrox)
> and see if that helps.
> I did try another scsi cable, no effect. I hope I haven't damaged the eds
> card somehow.
>
> "RiverLake Farms" <edna@texomaonline.com> wrote in message
> news:45d0fc0d@linux...
>> Thanks guys. I'll switch the slot. I did have it in slot 1 in my
>> previous P4 machine(with Nforce 2 video card) and it worked great.
>>
>> "Neil" <IOUOIU@OIU.com> wrote in message news:45d07a76$1@linux...
>>>
>>> Yup, 99.997% chance of this being the case... I was never able
>>> to get an EDS card working right in slot #1 on either mobo I
>>> had in my older Paris rig, and when I assembled my recent one I
>>> didn't even try it - set up like a dream with no problems.
>>>
>>> Neil
>>>
>>>
>>> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>>>Almost assured that slot one is sharing with your video card. Move to
>>>>slot
>>> 2
>>>>or 3.
>>>>
>>>>AA
>>>>
>>>>
>>>>"RiverLake Farms" <edna@texomaonline.com> wrote in message
>>>>news:45d0745e@linux...
>>>>> Thanks Aaron. It has its own IRQ, not shared. The EDS was detected,
>>> as I
>>>>> got the "found new hardware, multimedia audio controller" thing.
>>>>> However,
>>>
>>>>> it didn't want to accept the scherzo as a driver - I had to manually
>>>>> force
>>>
>>>>> it to accept it, as per instructions for manual installation. It did
>>> then
>>>>> put it in system devices and says its working properly. I also have
>>>>> the
>>>
>>>>> midi driver in DM under sound. I might try changing the pci slot, its
>>> now
>>>>> in slot one, and a different video card.
>>>>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>>> news:45cffaaa$1@linux...
>>>>>> 1/1 means the software doesn't recognize a usable hardware set. Check
>>> IRQ
>>>>>> sharing, make sure that you see the EDS in the hardware list
>>>>>> correctly,
>>>
>>>>>> and make sure the connection from the MEC to the EDS is all good. Be
>>> very
>>>>>> sure of these things, and be methodical and you'll find it.
>>>>>>
>>>>>> AA
>>>>>>
>>>>>> "RiverLake Farms" <edna@texomaonline.com> wrote in message
>>>>>> news:45cfef8b@linux...
>>>>>>>I attemted to move Paris to an older AMD based computer, to free up
>>>>>>>my
>>> P4
>>>>>>>for VSTis. I went thru the installation as outlined for 3.0 under
>>>>>>>XP,
>>>
>>>>>>>although I didn't get the scherzo installed til last. Anyway, now I
>>> am
>>>>>>>getting the failure to load Paris engine, error 1/1, which as far as
>>> I
>>>>>>>can find out means that Paris is not finding the scherzo driver.
>>>>>>>There
>>>
>>>>>>>are no conflicts showing in device manager, and the scherzo is listed
>>> in
>>>>>>>System Devices as "working." Video card (G400 matrox) is on an irq
>>>>>>>by
>>>
>>>>>>>itself. Anyone have any hints as to what I can try?
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
>
|
|
|
|
Goto Forum:
Current Time: Fri Nov 29 17:07:23 PST 2024
Total time taken to generate the page: 0.01289 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
