Home » The PARIS Forums » PARIS: Main » 44.1 and 48 Bug trick.....Try it
|
|
Re: 44.1 and 48 Bug trick.....Try it [message #73054 is a reply to message #73051] |
Mon, 25 September 2006 10:04 |
Terry Thomas
Messages: 5 Registered: September 2006
|
Junior Member |
|
|
No, i don't have any other digital devices connected just 2 mecs,4 eds, and
4 1000 inputs cards. This trick may not help those in your case with digital
devices. Has anyone else try this.
"DJ" <notachance@net.net> wrote:
>Do you haave any other digital devices interfaced with either MEC? I tried
>what you're talking about a while back and the devices that were interfacing
>with my Paris system (in my case, 56 digital connections) all lost sync
>with the Paris system and stayed lost until I truned everything off and
then
>rebooted everything.
>
>"Terry Thomas" <terryt@windstream.net> wrote in message
>news:4517fbe3$1@linux...
>>
>> I don't often post here on the site, but i enjoy reading all the ideas
you
>> guys offer. I was reading some old post, trying to catch up to the new
>ones.
>> Someone had a question about using two mecs and getting the sample rate
>light
>> to match on both mecs at either 44 or 48. I know both mecs will record
at
>> the sample rate of the master mec, but it is nice to see those lights
on
>> both mecs reading the same.
>>
>> 1. Set your desired sample rate at either 44 or 48 in your project window
>> 2. Click your sync source and change from internal to digital. The lights
>> will blink on and off 2 or 3 time and the second mec should sync with
the
>> master mec.
>> 3. Once the sample rate changes, switch back to internal and wait for
the
>> lights to stop blinking and you're set.
>>
>> Hey! It works on my system. I didn't know if you guys new this or not.
>Just
>> tring to be helpful. Let me know if it works for you, if you even care
to
>> try it.
>>
>>
>
>
|
|
|
Re: 44.1 and 48 Bug trick.....Try it [message #73055 is a reply to message #73051] |
Mon, 25 September 2006 10:04 |
Terry Thomas
Messages: 5 Registered: September 2006
|
Junior Member |
|
|
No, i don't have any other digital devices connected just 2 mecs,4 eds, and
4 1000 inputs cards. This trick may not help those in your case with digital
devices. Has anyone else try this.
"DJ" <notachance@net.net> wrote:
>Do you haave any other digital devices interfaced with either MEC? I tried
>what you're talking about a while back and the devices that were interfacing
>with my Paris system (in my case, 56 digital connections) all lost sync
>with the Paris system and stayed lost until I truned everything off and
then
>rebooted everything.
>
>"Terry Thomas" <terryt@windstream.net> wrote in message
>news:4517fbe3$1@linux...
>>
>> I don't often post here on the site, but i enjoy reading all the ideas
you
>> guys offer. I was reading some old post, trying to catch up to the new
>ones.
>> Someone had a question about using two mecs and getting the sample rate
>light
>> to match on both mecs at either 44 or 48. I know both mecs will record
at
>> the sample rate of the master mec, but it is nice to see those lights
on
>> both mecs reading the same.
>>
>> 1. Set your desired sample rate at either 44 or 48 in your project window
>> 2. Click your sync source and change from internal to digital. The lights
>> will blink on and off 2 or 3 time and the second mec should sync with
the
>> master mec.
>> 3. Once the sample rate changes, switch back to internal and wait for
the
>> lights to stop blinking and you're set.
>>
>> Hey! It works on my system. I didn't know if you guys new this or not.
>Just
>> tring to be helpful. Let me know if it works for you, if you even care
to
>> try it.
>>
>>
>
>
|
|
|
Goto Forum:
Current Time: Sun Dec 29 02:33:52 PST 2024
Total time taken to generate the page: 0.00683 seconds
|