The PARIS Forums: PARIS: Main » To PARIS or not to PARIS

Home » The PARIS Forums » PARIS: Main » To PARIS or not to PARIS

Show: Today's Messages :: Polls :: Message Navigator

To PARIS or not to PARIS [message #109542]

Wed, 08 August 2018 07:53

Will The Weirdo

Messages: 190
Registered: December 2009
Location: On The Lake

Senior Member

Hello everyone,
As along time PARIS user I'm at a crossroads.

I just purchased an API The Box for my production studio. I use Studio One v4 as my creation DAW and could easily stem out to The Box, or I can possibly hunt down 8 out or ADAT cards for PARIS. The PARIS cards are harder to find these days and PARIS does not allow tracks to be grouped, so I'm at a crossroads as to which way to go.

PARIS if I can find 4 output or ADAT cards or Studio One with one of the bazillion modern A/D D/A options available today.

PARIS would be much cheaper if I can find the cards, the modern route would cost more but easy to accomplish.

Any opinions?

Report message to a moderator

Re: To PARIS or not to PARIS [message #109544 is a reply to message #109542]

Mon, 13 August 2018 07:14

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

Hi Will

I'm sure you know this but I would have thought you can group tracks thru the Auxes.
Set up the Patch Bay for the physical connections (FX -> MEC Modules -> FX) then set the Auxes to "External" and send the various tracks to each depending on desired grouping. Volume and pan can me managed independently.
This way you're not limited by number of cards (except of course with regards to the number of tracks you have to send in the first place).

Or am I missing something?

Ted

Report message to a moderator

Re: To PARIS or not to PARIS [message #109545 is a reply to message #109544]

Mon, 13 August 2018 07:27

Will The Weirdo

Messages: 190
Registered: December 2009
Location: On The Lake

Senior Member

Hey Ted, thanks for the feedback, if I can find some 8 out cards I'll give it a go using your aux method. Unfortunately finding 8 out cards has been unsuccessful making me rethink using PARIS moving forward.

Sad times but after 20 years I'm at a real crossroads as to what to do but it's not looking good for PARIS in my studio.

Report message to a moderator

Re: To PARIS or not to PARIS [message #109546 is a reply to message #109542]

Mon, 13 August 2018 16:13

thesandbox1

Messages: 167
Registered: July 2009
Location: Carmel, IN

Senior Member

Kind of the same boat here. I have slowly been getting my studio back together over the last year after taking about a 4 year break and a move. I wanted to keep using PARIS on a newer comp and have it co-exist with Reaper. I installed all of Mikes latest and everything seemed to function but got a little frustrated when I seemed to have lost all my effects presets, delay comp settings, etc during the updates. I also wanted to keep moving forward and stay in the 64 bit world. Well, I decided as a trial run to go in a different direction with a few original tracks with some guys I have been jamming with lately and leaving PARIS out of the picture. I recorded and edited in Reaper using my RME 9652 as my interface as we are doing pretty much only a few channels at a time as Superior Drummer 3 was used for drums. Harrison had a great deal on the 32C v4 with all of their plugs for $149 not long ago so decided to make the leap. I mixed pretty much with all Harrison plugs and the console EQ and comp and seemed to be trouble free for me with about 60 tracks about 6-7 aux busses. I hate to say but I still have 1 MEC hooked up but am about ready to put it and my Magma up. Confused