Home » The PARIS Forums » PARIS: Main » ADAT routing
|
|
|
|
Re: ADAT routing [message #104001 is a reply to message #104000] |
Mon, 24 August 2009 09:03 |
|
Use the Brian Tankersley routing trick, which permits you to leave your ADAT tracks in an "always audible" mode, completely independent of your record or monitor status. You can leave them running sync'd, "print" them to the track whenever you like by putting the track into record enable, or mute them by muting the "External" input.
Quote: | Brian's great tip can minimize one use of a patchbay by eliminating one annoyance involved in patching equipment to PARIS inputs - "monitoring patched equipment without needing to be in 'record enable'"
Live Monitor and Record at the Same Time:
- Set all the *TOP* EDS inserts on your Paris ppj template to
External. Then put all of the individual External inserts in Bypass. You
should save the ppj that way. This assumes you don't use 4 EDS inserts
at once.
- Whatever your Input source is to a given channel of the Paris
Mixer, in the Patchbay, patch it to both the Mixer and also to the
Insert Return (top row) of the Insert Block. So any Input patch goes to
the both the Mixer in and the Insert return of the same channel. i.e.,
MEC Input 1 goes to Mixer Input 1 *and* Insert 1 Return (top row).
- You (unfortunately) must complete the Insert loop by connecting
each Insert Send (bottom row) to another point. If you don't use
external FX returns, you could just patch all 16 Insert Sends to the FX
Returns (top row). Or use some of the MEC Master patch points. Or some
other combo that works for you.
- Save this as your default ppj [and/or as a Patchbay setup] and you're
good.
When you want Live input without Record Enable, just pop on the
External EDS insert on any channel. You'll get the input, complete with
any other EDS inserts, EQ, FX sends....the whole enchilada just like you
were in Record Ready and Always Monitor Input. If you want to hear
what's already been recorded on that channel as is normal for Paris,
just bypass the External EDS insert.
Regards,
Brian T
|
"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon
|
|
|
|
|
|
Goto Forum:
Current Time: Wed Dec 18 04:32:56 PST 2024
Total time taken to generate the page: 0.01339 seconds
|