The PARIS Forums: PARIS: Main » going for broke with a new computer build

Home » The PARIS Forums » PARIS: Main » going for broke with a new computer build

Show: Today's Messages :: Polls :: Message Navigator

going for broke with a new computer build [message #102888]

Fri, 20 March 2009 16:20

dnafe

Messages: 390
Registered: February 2009

Senior Member

Hi all

As my Paris rig is officially dead we're going to be building a new rig
based on the Asus P5B MB and we're going to attempt to house 2 EDS cards and
2 UAD-1e cards on it. Now when I asked Chris Ludwig about this he was a tad
leary and UAD tech support was no help at all but in spite of this we
decided to live dangerously and jump in feet first. Bottom line here is I'm
going to need a rig with PCIe slots to host a vituavia expansion system in
the event this doesn't work so this kills two birds with one stone.

We haven't settled on which chip set to use and we are going to
significantly upgrade the RAM to the latest and greatest that the MB will
handle.

Should have the build done by Sunday and fully tested by Tuesday. Now I
realise this isn't a huge system and assuming it works it will make life a
lot easier.

Wish me luck

Don

Report message to a moderator

Re: going for broke with a new computer build [message #102891 is a reply to message #102888]

Fri, 20 March 2009 09:27

Robert

Messages: 127
Registered: May 2007

Senior Member

Good luck Don and do keep us posted.
Rob

"Don Nafe" <dnafe@rogers.com> wrote in message news:49c4297a@linux...
> Hi all
>
> As my Paris rig is officially dead we're going to be building a new rig
> based on the Asus P5B MB and we're going to attempt to house 2 EDS cards
> and 2 UAD-1e cards on it. Now when I asked Chris Ludwig about this he was
> a tad leary and UAD tech support was no help at all but in spite of this
> we decided to live dangerously and jump in feet first. Bottom line here
> is I'm going to need a rig with PCIe slots to host a vituavia expansion
> system in the event this doesn't work so this kills two birds with one
> stone.
>
> We haven't settled on which chip set to use and we are going to
> significantly upgrade the RAM to the latest and greatest that the MB will
> handle.
>
> Should have the build done by Sunday and fully tested by Tuesday. Now I
> realise this isn't a huge system and assuming it works it will make life a
> lot easier.
>
> Wish me luck
>
> Don
>

Report message to a moderator

Re: going for broke with a new computer build [message #102894 is a reply to message #102891]

Sat, 21 March 2009 00:28

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

Don,

I'll be watching. Good luck.

Tom

"Rob Arsenault" <mani1147athotmaildotcom> wrote in message
news:49c46344@linux...
> Good luck Don and do keep us posted.
> Rob
>
> "Don Nafe" <dnafe@rogers.com> wrote in message news:49c4297a@linux...
>> Hi all
>>
>> As my Paris rig is officially dead we're going to be building a new rig
>> based on the Asus P5B MB and we're going to attempt to house 2 EDS cards
>> and 2 UAD-1e cards on it. Now when I asked Chris Ludwig about this he was
>> a tad leary and UAD tech support was no help at all but in spite of this
>> we decided to live dangerously and jump in feet first. Bottom line here
>> is I'm going to need a rig with PCIe slots to host a vituavia expansion
>> system in the event this doesn't work so this kills two birds with one
>> stone.
>>
>> We haven't settled on which chip set to use and we are going to
>> significantly upgrade the RAM to the latest and greatest that the MB will
>> handle.
>>
>> Should have the build done by Sunday and fully tested by Tuesday. Now I
>> realise this isn't a huge system and assuming it works it will make life
>> a lot easier.
>>
>> Wish me luck
>>
>> Don
>>
>
>

Report message to a moderator

Re: going for broke with a new computer build [message #102898 is a reply to message #102894]

Sat, 21 March 2009 05:50

mikeaudet

Messages: 476
Registered: February 2009
Location: Canada

Senior Member

Hi Don,

Make sure you contact me if you run into any trouble. I'll be home all weekend.

Cheers,

Mike

Report message to a moderator

Re: going for broke with a new computer build [message #102899 is a reply to message #102898]

Sat, 21 March 2009 09:00

tonehouse

Messages: 184
Registered: July 2006

Senior Member

Myself,like alot of other longtime PARIS users,are at a "cusp" of what to do
when our current XP system breaks down...Unless I can get $20,000 for a Mac
and ProTools HD,it's not worth moving from PARIS..Vista is a joke....This
ASIO re-build seems like a very good solution to prolonging Paris future
life...It is getting difficult to find MBs with lots of PCI anymore...thanks
a million to keeping it alive...
"Mike Audet" <mike@mikeaudet.com> wrote in message news:49c4e73b$1@linux...
> Hi Don,
>
> Make sure you contact me if you run into any trouble. I'll be home all
weekend.
>
> Cheers,
>
> Mike.
>
>
> --------------------------
> :: [ posted via the PARISForums ] ::
> :: kerrygalloway.com/ParisForums/ ::
> --------------------------

Report message to a moderator

Re: going for broke with a new computer build [message #102902 is a reply to message #102899]

Sat, 21 March 2009 09:42

kerryg

Messages: 1529
Registered: February 2009

Senior Member
Administrator

tonehouse wrote on Sat, 21 March 2009 12:00

Myself,like alot of other longtime PARIS users,are at a "cusp" of what to do
when our current XP system breaks down...Unless I can get $20,000 for a Mac
and ProTools HD,it's not worth moving from PARIS..Vista is a joke....This
ASIO re-build seems like a very good solution to prolonging Paris future
life...It is getting difficult to find MBs with lots of PCI anymore...thanks
a million to keeping it alive...

Mike is a hero, he's changed the future for PARIS die-hards already.

Hey, I have a completely counterintuitive suggestion. Got a PCI-E slot on your current PARIS computer? Maybe you should consider going ahead and buying yourself a VirtuaVia chassis for the relatively low amount it costs, and moving your PARIS rig into it.

That may seem like a weird thing to do, since you'd have spent money and gone through a "gear dance", for the immediate gain of absolutely zero. No added functionality.

But with TC's great work testing the VirtuaVia chassis, and all Mike's incredible driver work last year, it's now become a smart "future-proofing" move. You'd have:

1) freed yourself from having to choose your future mobo from a small subset of available mobos and cases (ones with sufficient PCI slots, and lest we forget, those of sufficient physical size to hold a PARIS card without bumping into a drive bay etc),
2) absorbed one of the predictable costs of a future PC upgrade in advance so it doesn't all hit at once later, and
3) made re-installing your PARIS rig on a new computer in the future far, far easier - instead of the traditional hassle of reloading the cards, juggling slots, doing your cross cabling, figuring out which EDS card is the Master etc, you just load one card (the VirtuaVia PCI-E host card) into the new puter and and install the PARIS software. If you don't run into any particular gremlins, you'd be up and running in a fraction of the time after a computer upgrade. That's likely going to be my own approach.

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

Report message to a moderator

Re: going for broke with a new computer build [message #102909 is a reply to message #102902]

Sat, 21 March 2009 18:38

tonehouse

Messages: 184
Registered: July 2006

Senior Member

> > > >> http://www.cikira.com/gear/index.html
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>I saw they have some new hardware apa32 and apa44 that work as outboard
and can accept all waves plugins...
They have 1024 samples latency
So maybe could be a nice addition to paris
So you will not tax your cpu and I am sure it will have better sound if
it uses some dsps...
Regards,
Dimitrios..........zzzzzzzzzzz..........very late session. Get to bed around 3AM.

Wake up semi conscious and stagger zombie-like to kitchen.

Grind coffee, pour it into a filter basket, fill decanter with water, fill
coffee maker, then turn it on.

Find coffee cup in sink.

Pour a little honey colored dishwashing liquid in bottom of cup.

Lazy dogs decide to get up now that they see that I'm awke and walk to the
back door and start doing the *I gotta go pee* dance.

Set coffee cup on kitchen counter and go to back door and let lazy dogs out
to pee.

Stagger zombie-like back to kitchen counter, grab coffee cup, stagger
zombie-like over to refrigerator and grab the half and half.

Continue to stagger zombie-like over to the coffee maker where I have my
little honey bear. I pick up aforementioned honey bear to dribble some
wonderful local Colorado clover honey into bottom of coffee cup but see
thick golden syrupy substance in the bottom and so I
think........."hmmmmm.........must've already done that".

Pour half and half in cup on top of dishwashing liquid in bottom of cup
followed by a

Report message to a moderator

Re: going for broke with a new computer build [message #102910 is a reply to message #102888]

Sat, 21 March 2009 19:36

Deej
Messages: 130
Registered: September 2006

Senior Member

................ewwwwwwww.........nevermind.
> > >
> > > "Martin Harrington" <lendan@bigpond.net.au> wrote in message
> > > news:42b3c20d$1@linux...
> > > > She's got one by the looks of her.
> > > > --
> > > > Martin Harrington
> > > > www.lendanear-sound.com
> > > >
> > > > "Mr Simplicity" <animix_spamless_@animas.net> wrote in message
> > > > news:42b2d9ea@linux...
> > > > > ARRRRGGGHHHHH!!!!!!!!!!.........sheesh!!! and I thought I was
> > > > > nuts!!!..........wonder if she needs an SBS chassis?
> > > > >
> > > > > ;oP
> > > > >
> > > > > "Mike Claytor" <noway@nohow.com> wrote in message
> > > news:42b28e8a$1@linux...
> > > > >>
>

Report message to a moderator

OT! - Re: going for broke with a new computer build [message #102911 is a reply to message #102899]

Sat, 21 March 2009 22:08

Gantt Kushner

Messages: 545
Registered: June 2006
Location: Silver Spring, Maryland, ...

Senior Member

APIs or Old School Audio pres.

Bill L
"Eduardo Mack" <eduardomack2000@yahoo.com> wrote in message
news:42b58a3c@linux...
>I am looking for a warm and very open sound mic pre amp form drum over
>heads
> any sugestion?
>
>Really, nothing at all actually :-)

Ciao,
Rich

"Mr Simplicity" <animix_spamless_@animas.net> wrote in message
news:42b4b2e1$1@linux...
> Hey!!!!.......what's wrong with a little versatility?
>
> ;oD
>
> "Rich Lamanna" <richard.lamanna@verizon.net> wrote in message
> news:42b4a32e@linux...
> > Have you no shame (:?)
> >
> > Ciao,
> > Rich
> >
> > "Mr Simplicity" <animix_spamless_@animas.net> wrote in message
> > news:42b46dd1$1@linux...
> > > LOL!!!!!!!!! .......I wonder how many
> > > slots???......

Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com

Report message to a moderator

Re: going for broke with a new computer build [message #102912 is a reply to message #102910]

Sun, 22 March 2009 03:40

dnafe

Messages: 390
Registered: February 2009

Senior Member

he recording
process...so i took my removable drive from the computer [the drive that
was bottlenecking], slapped it in a firewire case and hooked it up..it wrote
fine with no hangups. mind you, this is a firewire card installed, not the
onboard firewire buss..

so:
a. it isn't the hard disk itself
b. the firewire bus is fast enough to run full open 32 tracks at 24/48k
c. something is amiss with my secondary IDE master

Report message to a moderator

Re: going for broke with a new computer build [message #102913 is a reply to message #102910]

Sun, 22 March 2009 08:40

tonehouse

Messages: 184
Registered: July 2006

Senior Member

>
i'd like to know the answer to D, but i'm still in business. i tracked last
night for 1.5 hours at a time at 23 tracks

thanks for putting up with all my questionsGood news. That's really strange about your IDE controller though.. Sounds
like

Report message to a moderator

Re: going for broke with a new computer build [message #102914 is a reply to message #102913]

Sun, 22 March 2009 08:59

kerryg

Messages: 1529
Registered: February 2009

Senior Member
Administrator

gt; >I am looking for a warm and very open sound mic pre amp form drum over
> >heads
> > any sugestion?
> >
> >
>
>wow...i've driven myself insane...but almost all is well now.

i was writing [audio] to my system *C* drive to test, and it was working
beautifully, but when i would write to my secondary IDE it would act like
data was bottlenecking and slowing down (but not stopping) t

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

Report message to a moderator

Re: going for broke with a new computer build [message #102915 is a reply to message #102913]

Sun, 22 March 2009 09:07

dnafe

Messages: 390
Registered: February 2009

Senior Member

rdo Mack" <eduardomack2000@yahoo.com> wrote in message
> news:42b58a3c@linux...
&

[Updated on: Sun, 22 March 2009 09:08]

Report message to a moderator

Re: going for broke with a new computer build [message #102916 is a reply to message #102913]

Sun, 22 March 2009 09:28

kerryg

Messages: 1529
Registered: February 2009

Senior Member
Administrator

bf2@linux...
> APIs or Old School Audio pres.
>
> Bill L
> "Edua

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

Report message to a moderator

Re: going for broke with a new computer build [message #102918 is a reply to message #102916]

Sun, 22 March 2009 12:40

TC

Messages: 327
Registered: September 2005

Senior Member

br /> > APIs or Old School Audio pres.
>
> Bill L
> "Eduardo Mack" <eduardomack2000@yahoo.com> wrote in message
> news:42b58a3c@linux...
> >I am looking for a warm and very open sound mic pre amp form drum over
> >heads
> > any sugestion?
> >
> >
>
>Great River works like a magic spell on everything for me.

Jimmy

"Bill Lorentzen" <bill@lorentzen.ws> wrote in message news:42b59

Report message to a moderator

Previous Topic:	paris-reaper asio
Next Topic:	Link: some interesting writings on general recording and production

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

PDF

]

Current Time: Sun Nov 24 03:14:31 PST 2024

Total time taken to generate the page: 0.01301 seconds