|
|
|
|
| Re: How would you do this? [message #78148 is a reply to message #78147] |
Wed, 10 January 2007 11:55   |
Sandy Tipping
Messages: 54
Registered: June 2007
|
Member |
|
|
You used the insert sends on Paris to route each track to its own output, or
Auxes if you needed to combine and then return to the console?
I haven't done it but it seems like you should be able to leave Paris in
"record-ready" mode and monitor input when stopped and repro when playing
back.
Sandy
"EK Sound" <askme@nospam.com> wrote in message news:45a54018@linux...
> We used to do this when we had the MCI. I had a second set of Tuchel
> multipins for the console and swaped between the DTRS rack and Paris buy
> moving the multi's around. If you have enough patch bay realestate, you
> could hook both up and patch between.
>
> For I/O of Paris you can use either the inserts or Aux sends.
>
> David.
>
> Sandy Tipping wrote:
>> Guys,
>>
>> In contemplating bringing Paris into a studio that already has a PT rig
>> hooked up to their Trident 80B, how would you swap the two systems (ie,
>> what gozinta goesouta etc)?
>>
>> I'm thinking something like:
>> (2) MEC
>> MEC A/D inputs fed from the console busses
>> MEC D/A outputs feeding console tape ret'ns
>>
>> In Paris, assign each track to it's own insert output?
>>
>> Thoughts? I just want a big tape deck that interfaces with the studio's
>> in-place Cue8 system, talkback, dynamics, patchbay etc.
>>
>> Sandy
>>
|
|
|
|
| Re: How would you do this? [message #78150 is a reply to message #78148] |
Wed, 10 January 2007 12:10 |
EK Sound
Messages: 939
Registered: June 2005
|
Senior Member |
|
|
You can use the post fade Aux sends for the outputs to the console...
this allows you to use the inserts for processing, and fader
automation in Paris on mix. Simply set all the Aux sends to external
and patch "Send 1 left" to output 1, 'Send 1 right' to output 2 etc.
You would have to use outboard effects, or switch back to ITB to mix
using Paris FX. As far as monitoring goes, Paris behaves exactly like
a tape machine would so no adjustment needed there.
David.
Sandy Tipping wrote:
> You used the insert sends on Paris to route each track to its own output, or
> Auxes if you needed to combine and then return to the console?
>
> I haven't done it but it seems like you should be able to leave Paris in
> "record-ready" mode and monitor input when stopped and repro when playing
> back.
>
> Sandy
> "EK Sound" <askme@nospam.com> wrote in message news:45a54018@linux...
>
>>We used to do this when we had the MCI. I had a second set of Tuchel
>>multipins for the console and swaped between the DTRS rack and Paris buy
>>moving the multi's around. If you have enough patch bay realestate, you
>>could hook both up and patch between.
>>
>>For I/O of Paris you can use either the inserts or Aux sends.
>>
>>David.
>>
>>Sandy Tipping wrote:
>>
>>>Guys,
>>>
>>>In contemplating bringing Paris into a studio that already has a PT rig
>>>hooked up to their Trident 80B, how would you swap the two systems (ie,
>>>what gozinta goesouta etc)?
>>>
>>>I'm thinking something like:
>>>(2) MEC
>>>MEC A/D inputs fed from the console busses
>>>MEC D/A outputs feeding console tape ret'ns
>>>
>>>In Paris, assign each track to it's own insert output?
>>>
>>>Thoughts? I just want a big tape deck that interfaces with the studio's
>>>in-place Cue8 system, talkback, dynamics, patchbay etc.
>>>
>>>Sandy
>>>
>
>
|
|
|
|
| Re: How would you do this? [message #78152 is a reply to message #78150] |
Wed, 10 January 2007 12:19 |
Sandy Tipping
Messages: 54
Registered: June 2007
|
Member |
|
|
Aaahhh, the stereo Aux, of course.
Excellent!
Thanks,
Sandy
"EK Sound" <askme@nospam.com> wrote in message news:45a54544@linux...
> You can use the post fade Aux sends for the outputs to the console... this
> allows you to use the inserts for processing, and fader automation in
> Paris on mix. Simply set all the Aux sends to external and patch "Send 1
> left" to output 1, 'Send 1 right' to output 2 etc. You would have to use
> outboard effects, or switch back to ITB to mix using Paris FX. As far as
> monitoring goes, Paris behaves exactly like a tape machine would so no
> adjustment needed there.
>
> David.
>
> Sandy Tipping wrote:
>
>> You used the insert sends on Paris to route each track to its own output,
>> or Auxes if you needed to combine and then return to the console?
>>
>> I haven't done it but it seems like you should be able to leave Paris in
>> "record-ready" mode and monitor input when stopped and repro when playing
>> back.
>>
>> Sandy
>> "EK Sound" <askme@nospam.com> wrote in message news:45a54018@linux...
>>
>>>We used to do this when we had the MCI. I had a second set of Tuchel
>>>multipins for the console and swaped between the DTRS rack and Paris buy
>>>moving the multi's around. If you have enough patch bay realestate, you
>>>could hook both up and patch between.
>>>
>>>For I/O of Paris you can use either the inserts or Aux sends.
>>>
>>>David.
>>>
>>>Sandy Tipping wrote:
>>>
>>>>Guys,
>>>>
>>>>In contemplating bringing Paris into a studio that already has a PT rig
>>>>hooked up to their Trident 80B, how would you swap the two systems (ie,
>>>>what gozinta goesouta etc)?
>>>>
>>>>I'm thinking something like:
>>>>(2) MEC
>>>>MEC A/D inputs fed from the console busses
>>>>MEC D/A outputs feeding console tape ret'ns
>>>>
>>>>In Paris, assign each track to it's own insert output?
>>>>
>>>>Thoughts? I just want a big tape deck that interfaces with the studio's
>>>>in-place Cue8 system, talkback, dynamics, patchbay etc.
>>>>
>>>>Sandy
>>>>
>>
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
