|
|
|
|
| Re: what are you all using for Desesser plugin for Paris? [message #61752 is a reply to message #61748] |
Thu, 22 December 2005 07:52   |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
>As far as the 16 pin cables go, hooking the output of A to the input of B,
and so on, completing the loop by hooking the output of D to the input of
A, it will be the exact same hookup.
Draw a diagram and you will see.
As far as the 10 pin cables are concerned, it would be different. (I forgot
about those). All I can say is try it the other way and see if it works.
Rod
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Dear Rod,
>Thanks for replying.
>Paris sees the card as follows assuming we see the cards inside PC naming
>1 the one that is close to agp card and 4 the furtherst away.
>1 card in pc = card B in Paris
>2 card in pc = card C in Paris
>3 card in pc = card D in Paris
>4 card in pc = card A in Paris
>
>Can you somehow describe how you would interconnect them ?
>If I have connected them "wrongly" why does Paris work ?
>
>Regards,
>Dimitrios
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>
>>Hook the up as Paris sees them. If I'm understanding you correctly, however,
>>it will be the same hookup , assuming cards C and D are in order below
B,
>>with A on the Bottom.
>>Rod
>>
>>
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>
>>>Hi,
>>>Merry Christmas to all of you although a little bit early...
>>>Regarding the intrconnection of 4 cards .
>>>I connected from like in the manual from first card (slot1) to the last
>>one
>>>(slot 5)
>>>I detect though that card 1 (slot1) is identified as card B, card 4 (slot
>>>5) is identified as card A (main card)
>>>So due to someone's last post here should I connect as Paris sees the
cards
>>>or as I see them inside my computer?
>>>Paris works ok but maybe I am risking or could have more stable setup
(nothing
>>>major though)
>>>Regards,
>>>Dimitrios
>>
>I use the DB also.
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Brian suggested the Db and I agree that it is worth the money.
>Tom
> "cujo" <chris@nospamapplemanstudio.com> wrote in message =
>news:43aabed8$1@linux...
>
>
> I think there is a good one here
> http://www.db-audioware.com/
>
> "David Posey" <crosscreekrecording@hotmail.com> wrote:
> >
> >I had done a search looking for a desesser plugin but have come up =
>with
> nothing.
> >Any help would appreciated.
> >David P
>
|
|
|
|
| Re: what are you all using for Desesser plugin for Paris? [message #61756 is a reply to message #61752] |
Thu, 22 December 2005 09:11 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
h
>>with
>>>the same hardware? www.debian.org and you won't owe Cupertino one thin
> dime.
>>>
>>>
>>>Come on in! The water's fine! Once you get used to being out of Big
>>>Brother's
>>>reach you'll love it!
>>>
>>>TCB
>>>
>>>"James McCloskey" <excelsm@hotmail.com> wrote:
>>>>
>>>>FYI, some interesting info about Mac OSX running on a PC.
>>>>
>>>> http://www.wired.com/news/mac/0,2125,68501,00.html?tw=wn_sto ry_related
>>>>
>>>>http://osx86project.org/
>>>
>>
>This is a multi-part message in MIME format.
---=_linux43aae4f1
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
D
Here's a diagram. See the 16 pins are the same, no matter which way you think
about it. The 10 pin WC cables are a little different.
No spaghetti though.
Bottom line...if it works...don't worry about it.
Rod
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Thanks,
>What I need to clarify is which is card A , B, C and D ?
>The ones that Paris sees as A B C D so to connect as Rod describes (A to
>B , B to C , C to D...) OR as they are inserted in PCI slots ??? first
(to
>the AGP card) is A, second is B,etc.
>The other way around (as Paris sees which are A,B<C,D) would make a spaghetti
>interconnection.
>That is because first card inside PC is recognized as card B, second as
card
>C, third as card D and fourth as card A...
>Thanks
>Dimitrios
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>
>>As far as the 16 pin cables go, hooking the output of A to the input of
>B,
>>and so on, completing the loop by hooking the output of D to the input
of
>>A, it will be the exact same hookup.
>>Draw a diagram and you will see.
>>As far as the 10 pin cables are concerned, it would be different. (I forgot
>>about those). All I can say is try it the other way and see if it works.
>>Rod
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>
>>>Dear Rod,
>>>Thanks for replying.
>>>Paris sees the card as follows assuming we see the cards inside PC naming
>>>1 the one that is close to agp card and 4 the furtherst away.
>>>1 card in pc = card B in Paris
>>>2 card in pc = card C in Paris
>>>3 card in pc = card D in Paris
>>>4 card in pc = card A in Paris
>>>
>>>Can you somehow describe how you would interconnect them ?
>>>If I have
|
|
|
|
|
|
|
|
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
