|
|
| Re: Patching External Hardware to the master 2buss [message #101745 is a reply to message #101743] |
Mon, 22 December 2008 13:47   |
TC
Messages: 327
Registered: September 2005
|
Senior Member |
|
|
So to answer my own question,
I needed to patch the L+R insert points on the "Mec C Inserts" object to
my physical i/o's, instead of patching insert points 1+2 as I was
attempting to do, which I'm assuming can only be used on individual tracks.
So to confirm what KG told me earlier today, I would need to chain the
devices externally in series if I want multiple external hardware
devices across the 2 buss in Paris.
Cheers,
TC
TC wrote:
> Hi All,
>
> I'm pulling my hair out trying to insert external hardware on the global
> master in paris. Would someone be so kind as to refresh my brain on this
> one?
>
> Currently I've got Mec C as master. I've got an external comp patched in
> and out of paris' analog i/o's (Mec C cards), routed in the Paris
> patchbay to insert points 1 + 2 on the Mec C Inserts object in the patch
> bay.
>
> On the global master fader, I've got the "external" option called up as
> an insert, but nothing is happening on the meter of my comp.
>
> If I simply route Mec C L+R outs to my comp, it shows signal, so I'm
> certain my routing is correct.
>
> What am I doing wrong here? Ideally I've got 3 hardware units that I'd
> like to strap across the 2 buss in paris..
>
> Cheers,
>
> TC
|
|
|
|
| Re: Patching External Hardware to the master 2buss [message #101751 is a reply to message #101745] |
Mon, 22 December 2008 18:03 |
Stewart
Messages: 3
Registered: December 2008
|
Junior Member |
|
|
You could mult the output from Mixer C to 6 outputs on an 8-Out card (3
stereo pairs) and send to the 3 external devices in parallel. You'd need to
sum the processed signals in the analog domain before returning the stereo
mix back into the main insert point in Paris.
At least, this works in my mind - I don't have an 8-Out card to try this
with. But the L-R insert point in the patchbay let me send L to Out 1 and 3
(as well as R to Out 2 and 4) simultaneously when I tried it just now. I'm
guessing you can mult the main insert to as many outputs as you have.
Someone please correct me if I'm wrong...
Cheers,
Stewart.
"TC" <tc@spammetodeathyoubastards.org> wrote in message
news:49500e9d$1@linux...
> So to answer my own question,
>
> I needed to patch the L+R insert points on the "Mec C Inserts" object to
> my physical i/o's, instead of patching insert points 1+2 as I was
> attempting to do, which I'm assuming can only be used on individual
> tracks.
>
> So to confirm what KG told me earlier today, I would need to chain the
> devices externally in series if I want multiple external hardware devices
> across the 2 buss in Paris.
>
> Cheers,
>
> TC
>
>
> TC wrote:
>> Hi All,
>>
>> I'm pulling my hair out trying to insert external hardware on the global
>> master in paris. Would someone be so kind as to refresh my brain on this
>> one?
>>
>> Currently I've got Mec C as master. I've got an external comp patched in
>> and out of paris' analog i/o's (Mec C cards), routed in the Paris
>> patchbay to insert points 1 + 2 on the Mec C Inserts object in the patch
>> bay.
>>
>> On the global master fader, I've got the "external" option called up as
>> an insert, but nothing is happening on the meter of my comp.
>>
>> If I simply route Mec C L+R outs to my comp, it shows signal, so I'm
>> certain my routing is correct.
>>
>> What am I doing wrong here? Ideally I've got 3 hardware units that I'd
>> like to strap across the 2 buss in paris..
>>
>> Cheers,
>>
>> TC
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
